• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2
• /
• pp.32-42
• /
• 1998

본 논문은 비균일 분포 수동형 견인 배열 센서를 사용하여 입사각 추정은 물론, 도 플러 주파수를 동시에 추정해내기 위한 기법을 제안한다. 균일 선형 센서 배열을 사용하는 전통적인 수동형 견인 센서 배열 처리기법은 센서간의 등 간격 구조 및 단순한 표본 과정에 기인하여 활용 분야의 한계성을 가지며, 주된 응용 분야가 방사된 음향신호의 입사각을 추 정하는데만 국한되어 사용될 수 있다는 문제점을 내포하고 있다. 이러한 사실 때문에, 수중 천해 환경 하에서 견인함의 등속 이동에 의해 발생하는 도플러 주파수들에 대한 정보는 목 표물에 대한 식별이나 음향신호 전달 경로의 모델링에 중요한 매개변수로 작용하며, 일반적 인 수동형 견인 센서 배열의 사용에 의한 처리 방식으로는 이러한 매개변수의 추출이 불가 능하게 된다. 본 논문은 이러한 제한성을 극복하고 방사 신호들의 개별적인 입사각 및 도플 러 주파수의 동시 추정을 가능케하도록 비균일 분포의 선형 센서 배열과 Sample Skipping 기법(Sample Skipping Technique;SST)을 적용한 새로운 형태의 수동형 견인 배열 센서 처 리 기법을 제안한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.2
• /
• pp.75-82
• /
• 2001

In this paper, a transmitter and a receiver using a Gunn diode and SBD was designed and fabricated in X-band. This system detects Doppler shift signal reflected by moving target through the homodyne detection, which is Doppler radar sensor for the measurement of the velocity of moving target. By the experimental results, the oscillating condition of the transmitter was satisfied at about the half wavelength between the supporting post of the Gunn diode in the waveguide and the waveguide short. And using the fabricated Doppler radar sensor, the velocity measurement deviation of moving target was 1.24%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.931-936
• /
• 2018

We designed an x-band radar for motion detector using a frequency tunable hairpin ring resonator. The proposed doppler radar sensor can vary the oscillation frequency by applying a hairpin resonator using a varactor diode to the oscillator, and this can also reduce the size by transmitting and receiving a signal from Tx/Rx dual antenna. The fabricated doppler radar sensor was fabricated in $30{\times}24mm$, and it was confirmed that the pulse width difference occurred according to the distance from the object. The measurement results showed oscillation at 10.525GHz. We confirmed that it is enough to use as radar for motion detection from the measured results.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.49-56
• /
• 2011

In this paper, a compact doppler sensor with oscillator type active antenna operating at 2.4GHz frequency band is proposed to measure the distance or speed of a moving object. The active antenna has been realized by oscillator using radiator, patch antenna, as its resonator. The oscillation frequency is shifted depending on approaching of the object, and a detection circuit discriminates the frequency deviation. The oscillator type active antenna has been designed and simulated. The prototype fabricated has a very small circular disk type of diameter 30mm and height 4.2mm. As for antenna performance, broadside radiation pattern with beamwidth of $130^{\circ}$ and oscillation frequency of 2.373GHz has been measured. Test results as a doppler sensor shows that doppler signal voltage of about 190mV has been obtained for conducting plate moving 1 meter away from the sensor. And, doppler signal voltage has been linearly increased to the ground from 4.5m height by free-falling the sensor.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.241-242
• /
• 2009

도플러 효과를 이용해 피부의 혈류 속도 분포를 측정하였다. 고속 CMOS 이미지 센서를 사용하여 $256{\times}256$ 픽셀의 크기를 갖는 혈류 속도 영상을 측정하였다. 많은 의학 치료 분야에서 혈류 흐름에 대한 영상, 특히 모세혈관에서의 혈류 흐름에 대한 영상을 필요로 한다. 레이저 도플러 기술은 물체의 속도를 물체에 접촉하지 않고 측정할 수 있는 대표적인 기술로, 레이저 광의 코헤런트한 특성과 비접촉성 특성은 인체 피부의 혈류 속도를 측정하는데 좋은 특성을 제공한다.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.77-84
• /
• 2000

In measurement of ship speed with a Doppler log sensor, we encounter the nonhorizontal movement of a ship, i.e. pitching and rolling, and that causes inaccuracy of the measurement. In this study, we develop a Janus type ultrasonic transducer that can resolve the problems in accuracy due to the pitching and other environmental factors of common ultrasonic sensors attributed to the underwater usage. For the development, we analyze the operation mechanism of the transducer, fabricate a prototype of the sensor, and evaluate its performance through experiments.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2009

In this paper, a 2.4 GHz doppler radar system consisting of a doppler radar sensor and a baseband module were designed to detect heart beat and respiration signal without direct skin contact. The doppler radar system emits RF signal of 2.4 GHz toward human chest, and then detects phase modulation of the reflected signal so as to investigate cardiopulmonary activities. The heartbeat and respiration signals acquired from I/Q channels of the doppler radar system are applied to the pre-processing circuit, the amplification circuit, and the offset circuit of the baseband module. The designed system was tested on mouse, rabbit and mankind, which have different range of heart rates and respiration signals, to evaluate detection accuracy of the system. ECG acquisition system and respiration transducer were used to generate the reference signal. In our experiments, a performance of detection were found to be high in the case that the subject stays still. In this paper, we confirmed that non-contact heart beat and respiration detection using the doppler radar has the possibility and limitation according to distance, cardiopulmonary activities, range of heart rates and respiration.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.125-133
• /
• 2016

In order to obtain high-resolution seafloor images, research on SA (Synthetic Aperture) processing and the development of related underwater systems have been performed in many countries. Recently the SA processing is also recognized as an important technique in Korea and researchers started related basic study. However, most previous studies ignored the Doppler effect by a moving receiver array. In this paper reconstructed SAS (Synthetic Aperture Sonar) images and position errors are analyzed according to the speed of a moving array for understanding its moving effect on the SAS images. In the analysis the spatial frequency domain interpolation algorithm is used. The results show that as the moving speed of the array increases the estimated position error also increases and image distortion gets worse when we do not consider the array motion. However, if the compensated receiver signals considering the array motion are used the position error and image distortion can be eliminated. In conclusion a signal processing scheme which compensates the Doppler effect is necessary especially in the condition where the array speed is over 1 m/s.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2101-2107
• /
• 2012

A current velocity measurement radar for a river or a stream estimates Doppler frequencies of return echoes to extract the corresponding surface velocity information. It is very important to maintain the reliability and accuracy of these velocity estimates for water resource management such as flooding or drought conditions. However, received Doppler spectra of water surface return echoes have very widely varying shapes according to different measurement environments and weather conditions. Therefore, serious problems may arise in maintaining the reliability and accuracy of velocity estimating algorithm in a radar sensor because of Doppler spectra which can have many different kind of shapes. Therefore, in this paper, an appropriate Doppler spectrum model is suggested to simulate many various Doppler spectra. This model can be very useful in validating the reliability and accuracy of surface velocity estimates.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.866-869
• /
• 2015

In this paper, we propose a device for detect front object using low-price the CW Doppler sensor to prevent safety accident such as a bicycle, an electric wheelchair users. For this propose, we develop a signal process board and the object motion detect algorithm using to analyzing output signal of the CW Doppler sensor. Output signal from CW Doppler sensor is analog I and analog Q. The CW Doppler sensor shows phase I and phase Q of object differently when the object approach, stop, drop by sensor. We develop an algorithm that can detect object by discrimination information of phase using the CW Doppler sensor. The verification use firmware of applied hardware and algorithm. Then, the motion information can be confirming output depending on motion object by experiment normally. As a result, we check that the sensing information output by following motion of object and confirm an algorithm and motion of signal processing board.