Design and implementation of a X-band Doppler radar sensor using the homodyne detection

호모다인 검파방식을 이용한 X-밴드 도플러 레이더 센서의 설계 및 제작

  • 장남영 (창원대학교 전기전자제어공학과) ;
  • 최평석 (창원대학교 전자공학과) ;
  • 은재정 (창원대학교 전자공학과)
  • Published : 2001.04.01

Abstract

In this paper, a transmitter and a receiver using a Gunn diode and SBD was designed and fabricated in X-band. This system detects Doppler shift signal reflected by moving target through the homodyne detection, which is Doppler radar sensor for the measurement of the velocity of moving target. By the experimental results, the oscillating condition of the transmitter was satisfied at about the half wavelength between the supporting post of the Gunn diode in the waveguide and the waveguide short. And using the fabricated Doppler radar sensor, the velocity measurement deviation of moving target was 1.24%.

본 논문에서는 Gunn 다이오드와 SBD를 이용하여 X-밴드 내역의 송신기 및 수신기를 설계 ·제작하였다. 이 시스템은 이동 물체의 속도를 측정하는 도플러 레이더 센서로서, 이동 물체에 의해 반사된 도플러 천이 신호를 호모다인 검파방식을 통해 검출한다. 실험을 통해 송신기의 발진조건은 대략 도파관에 위치한 Gunn 다이오드의 지지대와 도과관의 단락판 사이의 거리가 반파장일 때 만족함을 알 수 있었으며, 제작된 도플러 레이더 센서를 이용한 이동 물체의 속도측정 오차는 1.24%로 측정 되었다.

Keywords

References

  1. Physical Principles of Microwave Technology H. J. Chaloupka
  2. Microwave Devices & Circuits Samuel Y. Liao
  3. Microwave communications SIP 365AM Morris Tischler
  4. Microwave Engineering David M. Pozar
  5. Operational Amplifiers and linear Integrated Circuits Robert F Coughlin;Frederick F. Driscoll
  6. Design of Phase-Locked Loop Circuits Howard M. Berlin