• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.38-43
• /
• 2010

A continuing challenge in the aviation industry is how to safely keep aircraft in service longer with limited maintenance budgets. Therefore, all the advanced countries in aircraft technologies put great efforts in prediction of failure rate in parts and system, but in the domestic aircraft industry is lack of theoretical and experimental research. Prediction of failure rate provides a rational basis for design decisions such as the choice of part quality levels and derating factors to be applied. For these reasons, analytic prediction of failure rate is essential process in developing aircraft structure. In this paper, a procedure for prediction of failure rate for aircraft structural parts is presented. Cargo door kinematic parts are taken to illustrate the process, in which the failure rate for Hook part is computed by using Monte Carlo Simulation along with Response Surface Model, and system failure rate is obtained afterwards.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.17-18
• /
• 2012

Generally, speed control system is used to control the elevator door. The whole speed profile must be installed in the speed controller of the door control system. However, it is not easy to modify the speed profile when door opening size and time are changed. In this paper, the making speed profile is discussed by the door opening size and time. The position control algorithms of PMSM for elevator door system are compared with general speed control, position control method with speed controller, and position control with speed command feedforward compensation by simulation using MATLAB/SIMULINK.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.3
• /
• pp.39-54
• /
• 1992

Hollow core wood flush doors for wardrobes, and other general openings and bathroom were designed and fabricated to investigate the factors causing the bowing of them and to find out the countermeasure for the phenomena. Balance in grain orientation, thickness, specific gravity and M.C.(%) of face panel and symmetrical construction were the essential factors to prevent the deflection of flush doors just after manufacturing. Under one-sided severe service condition, the unbalance of M.C. between opposite face panels is inevitable. So the material as thick plywood with high stiffness is considered as an alternative for the stile. UF resin mixing into PVAc emulsion is preferred for bathroom.

• Transactions of Materials Processing
• /
• v.15 no.4 s.85
• /
• pp.289-294
• /
• 2006

To reduce automobile parts weight, TWB(tailored welded blank) forming is widely used in panel forming. But products used TWB forming process have many defect, wrinkle, crack and springback. So study of TWB forming process character is very important. In this study one of the current problems of TWB forming was analyzed, especially for the try-out process of inner door panel without frame. A comparison was made between actual measurements and prediction of forming analysis for formability and springback. Also a new analysis die model which have additional plane on die surface was proposed to correct result of forming analysis. This proposed method overcomes the difference for TWB forming result between try-out and analysis.

• Journal of Applied Reliability
• /
• v.13 no.4
• /
• pp.287-298
• /
• 2013

This paper presents a case study of PSD(Platform Screen Door) system assurance based on EN50126 life-cycle stage. By applying this system assurance, the accidents related to urban light transit railway especially that caused casualties could be reduced tremendously. This case study contributes significantly to the reliability, availability, maintainability and safety of the PSD system. Request For Proposal (RFP) of a rail road operator in which required by RAMS is prepared in which to ensure all system assurance activity and safety assessment are compulsory. The step-by-step activities and related deliverables are used which include functional analysis, FMECA, hazard identification analysis, system hazard analysis, maintainability analysis, FRACAS, and finally verification and validation of the system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.15-20
• /
• 2015

I developed a high-quality metal door with a hologram-pattern design using a high-speed electroforming process. In this study, the major processes were master production, conducting grant, nickel-sulfamate acid electroforming, ablation treatment, and final dressing. The processing system was provided with a nickel sulfamate pole, and a rotary-pole PP-plating jig in a circular tank. This approach could reduce defects and errors, as much as possible, by its use of a hologram pattern to create the master of a metal door. The thin-sheet metal-creation process for the door built-in metal pattern using electroforming with hologram was successful.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.396-399
• /
• 2004

어떤 집단에서든 그 구성원의 효율적인 관리가 무엇보다 중요하다. 이러한 효율적인 관리는 집단의 구성원이 많을수록 한 개인이 방대한 자료를 분석 및 관리하기에는 많은 어려움이 있다. 본 논문에서는 이 많은 자료를 바탕으로 퍼지 추론을 이용하여 근태 관리 시스템을 개발하였다. 먼저 퍼지입력 변수로는 출입구에 미리 설치되어 있는 지문 도어락과 관리실의 PC를 통해 사원들의 출퇴근 시간과 월별 근무시간, 월별 근무일수, 월별 조퇴 및 지각일수를 산출한 후 월별 휴가일수를 입력한다. 이 입력 데이터 값으로 퍼지 연산을 수행 후 구성원 개개인의 월별 성실도를 결정하였다.

• Electronics and Telecommunications Trends
• /
• v.35 no.4
• /
• pp.149-157
• /
• 2020

Security threats in supply-chains can be targeted at all the users who use products related to these supply-chains as well as at single equipment or individuals. This implies that these security threats can cause nationwide economic and social damages. In particular, it is true that hardware security threat analysis technology in supply-chains has significant technical barriers due to the lack of software knowledge as well as the need to study and understand undisclosed hardware designs. In this paper, we discuss the future direction of studies by introducing basic concepts and attack cases, along with domestic and foreign technology trends related to supply-chain security technology.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.01a
• /
• pp.133-134
• /
• 2017

본 논문에서는 APT 공격의 공격 시나리오와 그에 따른 방어 시나리오를 구상하여 기존 방어법의 문제점을 찾고 방어대책을 제시하고 솔루션을 구축하였다. 제안된 방어 프로세스는 기존의 방식과 달리 END-POINT에서 침투에 대해 모니터링을 통하여 APT공격에 대응하는 방식이다. 공격 툴 넷버스, 백오리피스, 서브세븐, 스쿨버스를 이용해서 공격을 시도 한 뒤 본 논문에서 구축한 방어 프로세스를 이용하여 방어 실험을 실시하였다.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1671-1674
• /
• 2007

A PSD system has a lot of characteristic for safety. Trust of performance test is very important. But PSD performance test has an effect on trust by proficiency of test staff because it is difficult to automate. In that specially the effort test, manual opening and shutting test and abrasion measurement, test staff is demanded for proficiency. Therefore the paper repeated measurement in same condition and studied proficient factor of examiner according to increased measurement counter. As a result, measurement uncertainty has improved.