• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3165-3174
• /
• 2012

Recently the increasingly common large refrigerator is the side by side(SBS) refrigerator whose freezing chamber and refrigerating chamber are set side by side. But one of the biggest dissatisfaction of customers about SBS refrigerator is that the two doors don't meet the same height when they are closed. It is called door height difference(DHD). The main cause of DHD is the unevenness of floor on which a refrigerator is placed or the cabinet deformation caused by long time use. When the DHD is confirmed, the customer or maintenance personnel use wrench to adjust the support screw to make the refrigerator to reach the horizontal position. But for big refrigerator, it is not only difficult for women and old people who don't have enough force to adjust it, but also inappropriate to require customers to do this job. In order to resolve this problem, this research proposes a new mechanism which can detect the DHD and adjust two doors to the same height automatically. The adjustment would be completed during opening and closing the doors, avoid needing hard operation with wrench by hand.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.483-490
• /
• 2016

Automobile door latch is a fine design and assembly techniques are required in order to produce them in a small component assembly shape such as a spring, injection products, a small-sized motor. The door latch is fixed to not open the door of the car plays an important role it has a direct impact on the driver's safety. In this study, during trimming of the terminals of the connector main components of the car door latch, reduce rollover and conducted a research to find a suitable effective shear surface. Using the Taguchi method with orthogonal array of Finite Element Analysis and optimal Design of Experiments were set up parameters for the shear surface quality of the car door latch connector terminals. The design parameters used in the analysis is the clearance, the radius, and the blank holding force, the material of the connector terminal is a C2600. Trimming process optimum conditions suggested by the analysis has been verified by experiments, the shear surface shape and dimensions of a final product in good agreement with forming analysis results.Taguchi method from the above results in the optimization for the final rollover and effective shear surface improved for a vehicle door latch to the connector terminal can be seen that the applicable and useful for a variety of metal forming processes other than the trimming process is determined to be applicable.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.625-626
• /
• 2006

Nowadays, the increasing global competition forces manufacturing enterprises to apply new technologies method of their products. To save time and cost in assembly process and to increase the quality of products, it is very important to choose an optimal assembly system. We propose a methodology that generates an optimal assembly system by using the Digital manufacturing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.115-115
• /
• 2004

최근에는 자동차용 범퍼(Bumper), 인판넬(In-panel), 도어판넬(Door panel), 도어가니쉬(Door Garnish) 등과 같은 대형 사출성형품을 성형하기 위한 금형설계에 핫 러너 시스템(Hot Runner System)에 밸브 게이트(Valve Gate)를 채용한 밸브 게이트 시스템을 많이 사용하고 있다 이 시스템을 사용함으로서 성형 싸이클타임의 단축, 수지 스크랩의 감소 등의 말은 장점이 있으나, 실제 성형작업 적용 시 밸브 게이트의 작동순서 및 개폐시간의 제어 등에 정확한 표준이 없어 시험 사출시 최적 성형조건의 셋팅이 많은 시간을 소모하고 있는 문제점이 있다.(중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.73-78
• /
• 2001

현재 많은 나라에서 지하철 역사에 승강장 스크린 도어(Platform Screen Door)를 설치하여 열차진입에 따른 승강장부의 공조환경 개선 및 승객의 안전을 확보하고자 하고 있다. 한국에서도 서울 지하철 9호선을 비롯하여 각 도시에서 PSD를 지하철 승강장부에 설치하는 노력이 시도되고 있으나, 이에 대한 검증은 전무한 실정이다 한국에서의 지하철 이용 분담율은 30％정도이며, 향후 약 50％까지 이를 것으로 예상되며, 이에 따라 PSD설비는 증가할 것으로 전망된다. 따라서 PSD 설치에 대한 지하철역사 환기 및 화재시의 배연설비에 대한 연구의 필요성은 날로 논아지고 있는 실정이다.(중략)

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.155-159
• /
• 2009

Recently, a Elevator system is specially important in human life. Also a elevator door is important to a elevator system. In this paper, induction motor drive system using vector control was developed with high performance for elevator door system. For this, velocity pattern generation method was proposed. The proposed system is verified by experimental result with 400[w] induction motor drive system for the elevator door.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.562-564
• /
• 2002

최근 커널의 특정부분을 사용자 임의로 수정하여 시스템을 공격하는 여러 가지 기법들, 즉 커널 백도어가 늘어나고 있다. 이 커널 백도어의 문제점은 커널 자체를 수정하기 때문에 탐지 및 복구가 힘들다는 것이다. 이에 대응하여 커널 백도어를 탐지하는 대부분의 방법이 특정 주소를 검사하여 이루어지는데 이는 확실한 탐지에는 한계가 있다. 설사 탐지는 가능하다 하더라도 복구는 거의 불가능한 것이 현실이다. 이에 본 논문에서는 커널이 기동될 때 사용되는 순수한 부트 이미지와 커널에서 실행중인 이미지를 비교하여 커널의 무결성을 검사, 복구하는 시스템을 제안한다.

• Air Cleaning Technology
• /
• v.16 no.1 s.60
• /
• pp.39-49
• /
• 2003

• 방재와보험
• /
• s.153
• /
• pp.23-29
• /
• 2014

• Railway Journal
• /
• v.17 no.1
• /
• pp.51-54
• /
• 2014