• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.4
• /
• pp.34-47
• /
• 2009

Rapid urbanization is causing environmental and ecological damage, development thoughtless for the environment, and social and economical issues. It is important to grasp urban growth situations and characteristics, reflect them, and establish a policy for the solution of issues pursuant to urbanization and the sustainable and efficient development of national land. This research aims to be used as basic data in establishing an urban policy by analyzing the situations and characteristics of urban growth for the past 20 years in our entire country rather than an existing district. For this, some urban districts were sampled using a 1980s and 2000s version of land cover map produced by Ministry of Environment, and then pattern analysis for urban growth by administrative district ranks was conducted using GIS and a statistical technique. As a result, the development zone area after 1980s has increased by 2.5 times as compared to that before 1980s, and especially in the farm villages neighboring the national capital region, it has increased by 21.2 times. Special cities and metropolitan cities were developed at the districts being low in altitude, close to the principal road and the major downtown, high in road ratio, and restricted environmentally, ecologically and legally, and were diverted from mountains, forests and grassland to urban land. On the other hand, farm villages neighboring a large city, farm villages neighboring the national capital region, and local farm villages were developed at the districts being high in altitude, far from the principal road and the major downtown, low in road ratio, and not restricted environmentally, ecologically and legally, and were diverted from farmland to urban land. That is, it can be seen that urban development has been actively realized despite the unfavorable topographical conditions in the suburban districts due to lack of available land and various regulations and policies as urban growth around big cities expands.

• Journal of Korean Society of Transportation
• /
• v.14 no.3
• /
• pp.173-190
• /
• 1996

본 논문에서는 최근 차량의 급격한 증가로 인해 더욱 더 가중되고 있는 도시내 교 통혼잡 완화를 위한 하나의 현실적 대안으로 무선 호출망을 이용한 ATIS (첨단 교통정보시 스템)의 구체적 구현방안을 제시하였다. ATIS를 위한 통신매체로서 무선 호출망을 사용하는 것은 다음과 같은 잇점을 갖는다. (1) 교통정보의 동시전송 가능 및 이를 통한 무선채널의 경제성 제고, (2) 간단한 망접속 절차 및 송수신의 안정성, (3) 하드웨어 및 통신비용의 저 렴, 시스템 구현 및 시험을 위해 무선 호출망을 이용한 교통정보 전송 프로토콜 및 시험용 전자지도를 개발하였으며, 이의 실용화를 위한 교통정보 서버 및 무선 호출망을 이용한 교 통정보 전송 프로토콜 및 시험용 전자지도를 개발하였으며, 이의 실용화를 위한 교통정보 서버 및 무선 호출망과 연동되는 차량내 교통정보 단말장치를 개발 중에 있다. 실현 가능성 시험을 위한 PROTOTYPE 시스템을 개발하였으며, 이를 이용해 시험적인 실제 무선 호출망 을 통해 가상 교통정보 송수신 시험을 하여 만족할만한 결과를 얻었다. 또한, 향후, 시스템 의 지능화를 위해서 교통사건에 의한 교통량변화 모델링을 위한 기본적인 사항들을 연구, 이에 관해 기술하였다. 제안 시스템의 성능 개선 및 지능화, 실제 적용을 위해 계속적인 연 구를 진행 중에 있으며, 이를 통해 미비점이 좀 더 보완되면 기존 무선 통신망을 이용한 ATIS 구현의 좋은 사례가 될 것으로 사료된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.85-94
• /
• 1995

Remote Sensing plays an Important role when we gather and extract many informations about development of the land, circumstances of urbans, land use, surveying resource and marine, geological survey, classification of trees, and condition of trees. For geometric collection to improve the accuracy of positioning with data in the processing of projection treatment by remote sensing. Authors have compared two methods by maps and GPS. Thereafter authors study exact transmation of coordinates in the projection of satellite. Authors have tried to gain improvability of difficulties and problems in the real topography, and Authors consider the coordinates system about global superposition by satellite image.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.92-92
• /
• 2023

본 연구에서는 대한민국 도시 유역에 대하여 딥러닝 네트워크 기반의 분산형 수문 모형을 개발하였다. 개발된 모형은 완전연결계층(Fully Connected Layer)으로 연결된 여러 개의 장단기 메모리(LSTM-Long Short-Term Memory) 은닉 유닛(Hidden Unit)으로 구성되었다. 개발된 모형을 사용하여 연구 지역인 중랑천 유역을 분석하기 위해 1km² 해상도의 239개 모델 격자 셀에서 10분 단위 레이더-지상 합성 강수량과 10분 단위 기온의 시계열을 입력으로 사용하여 10분 단위 하도 유량을 모의하였다. 모형은 보정과(2013~2016년)과 검증 기간(2017~2019년)에 대한 NSE 계수는각각 0.99와 0.67로 높은 정확도를 보였다. 본 연구는 모형을 추가적으로 심층 분석하여 다음과 같은 결론을 도출하였다: (1) 모형을 기반으로 생성된 유출-강수 비율 지도는 토지 피복 데이터에서 얻은 연구 지역의 불투수율 지도와 유사하며, 이는 모형이 수문학에 대한 선험적 정보에 의존하지 않고 입력 및 출력 데이터만으로 강우-유출 분할과정을 성공적으로 학습하였음을 의미한다. (2) 모형은 연속 수문 모형의 필수 전제 조건인 토양 수분 의존 유출 프로세스를 성공적으로 재현하였다; (3) 각 LSTM 은닉 유닛은 강수 자극에 대한 시간적 민감도가 다르며, 응답이 빠른 LSTM 은닉 유닛은 유역 출구 근처에서 더 큰 출력 가중치 계수를 가졌는데, 이는 모형이 강수 입력에 대한 직접 유출과 지하수가 주도하는 기저 흐름과 같이 응답 시간의 차이가 뚜렷한 수문순환의 구성 요소를 별도로 고려하는 메커니즘을 가지고 있음을 의미한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.3
• /
• pp.93-103
• /
• 2007

In order to plunder the Korean Peninsula in earnest, 'Modern Age Korea Topographical Map' of reduced 1:50,000 scale was manufactured within the period of 5 years from 1914 to 1918 through Japanese government-general of Joseson. This map includes all the data representing the life model of Korean Peninsula in the period of the End of Korean Empire, before the modern public construction works had started to seriously develop. This study analyzes the land use change after embedding the coordinates to the image of Modern Age Korea Topographical Map, which includes the scenery of 1910, and then overlaying it with the contemporary map in GIS environment. The results of presented research showed that before modern civil construction works started, the farmlands had lost their competitiveness because of difficult for development hilly areas and frequent floods, the river sites being abandoned and industrial structure change, and were developed into modern city area.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.115-126
• /
• 2018

A new urban paradigm that moves from a vehicle-centric to pedestrian-centric culture should be considered to improve the quality of the pedestrian environments for women, children, senior citizens, and disabled persons as well as to promote community unification by providing general movement rights to everyone. This study was implemented to provide decent alternatives to improve street spaces. The street spaces around the Commercial and Residential Area No.1 located in the Administrative-Centered City, Sejong Special Autonomic City, were selected to analyze and define the status of the walkways and the street spaces. Satellite imagery and numerical maps were used to collect geographic data. Practical and actual surveys for the selected sites were performed to analyze the street status and the pedestrian status. Based on the all collected data, analysis results, and literature reviews, the questionnaire was made, and 315 inquiries qualified for analysis. The physical status of all four study sites was the highest level, Grade A, and green open spaces were relatively sufficient. As a result, the factors obtained from the factor analysis have an impact on the satisfaction of the pedestrian streets in the commercial area. The factors are as followed Design > Convenience > Roadside trees and rest areas > Safety > Safety protective facilities > Transportation and information facilities > Continuity > Basic state of road surfaces > Comfortability, and in the residential area: Transportation and information facilities > Basic state of road surfaces > Comfort > Convenience > Continuity > Design > Illumination and crime prevention facilities > Safety > Roadside trees and rest areas.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.1
• /
• pp.30-40
• /
• 2020

Monitoring the urban environmental changes caused by the urban regeneration project is necessary for evaluating the effect of the various types of urban regeneration projects that have been carried out in Seoul, South Korea. However, there is few available data and professional expert for evaluating the effect of these urban regeneration projects. This research evaluated the effect of the construction of rainwater village in Jangwi-dong area, constructed through the Seoul urban regeneration project, by utilizing the land surface temperatures derived from the multi-temporal Landsat-8 satellite images through the following steps. In the first step, the land surface temperature images were generated using the multispectral bands of the Landsat-8 satellite images. In the final step, the effect of constructing the rainwater villages was assessed by calculating the seasonal LST statistics for Jangwi-dong area, its neighbor area and entire Seoul area. The experimental results led the following conclusion: the construction of rainwater villages did not have the significant effect on the land surface temperature changes in Jangwi-dong area.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.1975-1984
• /
• 2021

Urban expansion results in raising the temperature in the city, which can cause social, economic and physical damage. In order to prevent the urban heat island and reduce the urban land surface temperature, it is important to quantify the cooling effect of the features of the urban space. Therefore, in order to understand the relationship between each object of land cover and the land surface temperature in Seoul, the land cover map was classified into 6 classes. And the correlation and multiple regression analysis between land surface temperature and the area of objects, perimeter/area, and normalized difference vegetation index was analyzed. As a result of the analysis, the normalized difference vegetation index showed a high correlation with the land surface temperature. Also, in multiple regression analysis, the normalized difference vegetation index exerted a higher influence on the land surface temperature prediction than other coefficients. However, the explanatory power of the derived models as a result of multiple regression analysis was low. In the future, if continuous monitoring is performed using high-resolution MIR Image from KOMPSAT-3A, it will be possible to improve the explanatory power of the model. By utilizing the relationship between such various land cover types considering vegetation vitality of green areas with that of land surface temperature within urban spaces for urban planning, it is expected to contribute in reducing the land surface temperature in urban spaces.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.247-256
• /
• 2008

Recently, natural disasters like flooding damages have frequently occurred as to typhoons and local downpours affected by the climate changes. Many researches have actively been studied in analysing runoff models, the verification of their parameters, and the inflow on surfaces in order to lessen the damages. However, much time and effort needs in generating input files of the models in most current researches. Therefore, in this paper we develop a system for generating a simulation input data automatically. This system is connected to the EPA-SWMM based on the spatial data in the UIS systems and consists the simulation module for analysing urban flooding and the SWMM simulator module. Also, we construct a prototype using a range of regular inundation to generate a simulation input file. This system gives advantages showing inundation areas based on the map viewer as well as lessening errors of input data and simulation time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.171-180
• /
• 1993

Concern about nonpoint source pollution associated with urban storm water has led to the development of new tools for better water quality planning. This paper presents an application of a geographic information system (GIS) for urban water quality study. The GIS was used to manage land use data for nonpoint source pollution modeling and to aggregate pollutant loadings within various types of geographic units. An empirical water quality model was used to estimate pollutant loadings based primarily on land use. A land use coverage was created by updating an old coverage through interpretation of recent photography. This land use coverage was also used to record all pollutant loadings for each land use polygon. Storm sewer maps were digitized and interpreted to create a coverage of storm sewer basins and sub-basins. By overlaying pollutant loadings with the sewer sub-basin layer, aggregated pollutant loadings for major sewer outfalls were calculated. Based on the loading information, critical areas of excessive pollutant loadings were located and the effectiveness of Best Management Practices (BMPs) to control pollutant loadings were evaluated.