• Land and Housing Review
• /
• v.15 no.2
• /
• pp.57-71
• /
• 2024

This study aims to develop an evaluation method for solar power facilities considering disaster impacts and to analyse the vulnerabilities of existing facilities. Haenam-gun in Jeollanam-do, where the reassessment of existing facilities is urgent, was selected as the study area. To evaluate the vulnerability from a more objective perspective, principal component analysis and entropy methods were utilised. Seven vulnerability assessment indicators were selected: maximum hourly rainfall, maximum wind speed, number of typhoon occurrence days, number of rainfall days lasting more than five days, maximum daily rainfall, impermeable area ratio, and population density. Among these, maximum hourly rainfall, maximum wind speed, maximum daily rainfall, and number of rainfall days lasting more than five days were found to have the highest weights. The overlay of the derived weights showed that the southeastern regions of Haenam-eup and Bukil-myeon were classified as Grade 1 and 2, whereas the northern regions of Hwawon-myeon, Sani-myeon, and Munnae-myeon were classified as Grade 4 and 5, indicating differences in vulnerability. Of the 2,133 facilities evaluated, 91.1% were classified as Grade 3 or higher, indicating a generally favourable condition. However, there were more Grade 1 facilities than Grade 2, highlighting the need for countermeasures. This study is significant in that it evaluates solar power facilities considering urban disaster resilience and is expected to be used as a basic resource for the installation of new facilities or the management and operation of existing ones.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.304-304
• /
• 2023

Cisangkuy 유역은 인도네시아 3대 도시인 반둥시의 주요 식수원 중 하나로 Citarum 강의 1지류에 해당된다. Cisangkuy 유역은 수계가 매우 복잡할 뿐만 아니라 다양한 관리 주체 및 다수의 수리시설물이 존재하여 수자원의 이용 및 관리에 많은 어려움이 있다. 특히 하천 수량의 대부분을 소수력 발전소의 발전용수로 활용하고 있기 때문에 식수원으로 활용할 수 있는 수량은 극히 한정되어 있다. 본 연구에서는 Cisangkuy 유역의 상수공급 부족 문제를 해소할 수 있는 비구조적인 대책으로써 물관리 시설물의 운영 최적화를 위한 방안을 제시하기 위해 물수지 네트워크 모형인 MODSIM을 활용하여 용수이용 효율 극대화를 위한 연구를 수행하였다. 이를 위해 연구대상지역의 용수이용 현황 및 물관리 시설물에 대한 운영 현황을 조사하였고, 유역 내 물 공급/배분 현황 분석을 수행하여 용수공급체계 개선방안 수립을 위한 물수지 분석 시나리오를 구축하였다. 시나리오는 크게 기존 저수지 운영효율 개선효과 검토, 저수지 상하류 신규댐 설치에 따른 연계운영 효과 검토, 극한 가뭄 발생시 연계운영 효과 검토, 관개용수 우선순위 적용에 따른 발전유량 이수안전도 검토로 구성되며, 각 시나리오별로 물수지 네트워크 모형을 구축하여 물관리 시설물 간 연계운영에 따른 이수안전도 평가를 통한 용수공급 가능량을 검토하였다. 본 연구의 결과는 인도네시아 Citarum 상류에 위치한 Cisangkuy 유역 내 다양한 시설물의 연계운영 효과를 분석하기 위한 초석이 될 수 있으며, 한정된 수자원과 다양한 수요 간의 효율적이고 합리적인 분배 및 시설물 운영문제를 해결하기 위한 의사결정도구로써 활용될 수 있을 것으로 판단된다. 아울러 인도네시아 물산업 육성을 위해 진출 시 수자원의 효율적인 활용을 위한 기초자료로 활용할 수 있을 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.2
• /
• pp.133-139
• /
• 2024

The purpose of this study is to propose a new material called polyketone to overcome the limitations of polyurethane, which is currently used as a compression member in the field of earthquake-resistant structures. Although existing polyurethane has excellent elastic properties, it tends to be insufficient to recover the displacement that occurs in the structure. On the other hand, polyketone has excellent strength performance and is attracting attention as an eco-friendly material. In order to evaluate the compression properties of polyketone, which has these advantages, we would like to conduct a comparative experiment with polyurethane that was previously used. The speed dependence of polyketone was identified through simple compression experiments and experimental speed changes under repeated loading conditions, and additional compression behavior was applied to confirm compression behavior characteristics. Polyketone showed compressive strength about 10 times higher than that of polyurethane, and its excellent recovery characteristics were demonstrated by its deformation recovery ability about 14 times higher at relatively small displacements.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.92-104
• /
• 2015

In order to analyze the impacts of climate change, a time and space integrated model was developed in this study using system dynamics and GIS. The model built was used to carry out a simulation on the inundation impact on A-gu of Busan Metropolitan city resulting from the sea level rise scenario of IPCC and storm surge, which is the worst case. Through this, the flooded area and population until 2100 were predicted. Also, the result and significance of each alternative was reviewed improving the model by establishing alternative scenarios of protection, accommodation and retreat as plans of reaction to sea level rise. The combination of system dynamics and GIS has advantages of how the diverse variables change until the target year can be traced and, accordingly, not only the results but also the processes of spatial change can be examined by calculating the value of change process at each time step. The synergy of this model presumed to be a foothold for solving problems which are becoming difficult to predict due to increase in uncertainty and complexity such as the support for decision making for urban resilience to natural disasters.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.271-278
• /
• 2019

The corrosion of reinforcements embedded in concrete causes severe deterioration in reinforced concrete structures. As a countermeasure, epoxy coated reinforcements are used to prevent corrosion of reinforcements. When epoxy coated bars are used, the resistance of corrosion is excellent, but epoxy coating on the bars have a disadvantage of reduction in bond capacity comparing to that of normal bars. Therefore, it is necessary to confirm the bond performance of epoxy coated reinforcements through experimental and analytical methods. Bond behaviors of epoxy coated bars for various diameters of 13 and 19mm and thicknesses of cover concrete of 3 types(ratio of cover to bar diameter) are examined. As the diameters of the epoxy coated bars increase, the difference of bond strength between epoxy coated and uncoated bars also increases and damage patterns showed pull out failure. In addition, finite element analysis was performed based on the bond-slip relationship obtained by direct pullout test and compared with the flexural test results. It is considered that flexural member test is more useful than pullout test for simulating the behavior of actual structure.