• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.4
• /
• pp.9-16
• /
• 2000

This paper shows the performance of a multiuser detection DS-CDMA receiver based on of the hybrid scheme of parallel interference cancellation (PIC) and successive interference cancellation (SIC). The proposed hybrid interference cancellation is presented and is compared with existing PIC, SIC and Hybrid It of other type schemes. The performance criteria used for comparison are complexity, delay and average bit error rate (BER) performance obtained by simulation in Rayleigh-fading channel (Jake's model) with additive white Gaussian noise (AWGN). In the proposed hybrid IC, the BER performance approximates the one of SIC and the delay is half of the SIC. And the number of cancellation of the hybrid It is reduced about a fourth.

• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.116-129
• /
• 2013

The aim of this study is to investigate the effects of rosemary on the quality characteristics of tomato sauce during storage period(60days). As storage time went by, analysis of color differences of tomato sauce showed that "L", "a", "b"-value of tomato sauce less decreased with more herbs added, but there were no significant differences. As storage time went by, the pH ranged between 4.10-4.25, the sweetness between $10.50-9.67^{\circ}Brix$, and the salinity between 0.90~1.56 among all additions. Also, the more herbs were added, the more viscosity increased. The reducing sugar content ranged between 38.87-55.38, and its highest was shown in the sample with 0% of rosemary during the storage period. The sensory evaluation was performed with scoring tests for color, flavor, taste, aftertaste, viscosity, and overall acceptability by 15 professional panelists. The result showed that the tomato sauce with 1% rosemary was the best in the color, flavor, taste, aftertaste, and overall acceptability. From the above results, the study suggests that the addition of 1% fresh rosemary to tomato sauce is recommended for commercial use.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.253-263
• /
• 2008

Extension of IFC data model for steel bridge members is proposed to represent detailed design information. First of all, the design data items and their representation method are classified by analyzing primary references such as design specification, structural calculation documents and shop drawings. Some of the classified items are enough to be represented by the existing IFC model. However, the need of additional model is noted to systematically represent the design information for other items such as stiffener, diaphragm, joint system, and shear connector. An inheritance relations and properties for added model are also defined. The application program based on the proposed data model is developed. In the end, by loading the application program on the AutoCAD 2002 program, end-users can input the design information of steel bridge members. The applicability and efficiency of the proposed data model and the program are verified by checking the section area, intervals, and interferences.

• Geophysics and Geophysical Exploration
• /
• v.4 no.3
• /
• pp.80-83
• /
• 2001

Four seismic reflection horizons in 3-D seismic data, coherence derived from the seismic data, and 38 well logs from the Boonsville Gas Filed in Texas were tried to be integrated and visualized in 3 dimensions. Time surface was constructed from pick times of the reflection horizons. Average velocities to each horizon at 38 well locations were calculated based on depth markers from the well logs and time picks from the 3-D seismic data. The time surface was transformed to depth surface through velocity interpolation. Coherence was calculated on the 3-D seismic data by semblance method. Spatial distribution of the coherence is captured easily in 3-D visualization. Comparing to a time-slice of seismic data, distinctive stratigraphic features could be correctly recognized on the 3-D visualization.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.1 s.1
• /
• pp.72-79
• /
• 2000

Design quality in constructed project is a primary consideration to achieve overall project objectives. It is not easy to evaluate the design quality because various factors are involved in the design process. This paper presents a new approach to improve the evaluation process of design quality In the construction project The evaluation model is developed to satisfy the requirement for implementing the ISO 9000 Quality Assurance Standards in the design process. It is assumed that design changes are resulted from the poor management of design quality. The model relates design changes to design quality management items. It assigns weight ratio to each design quality item to evaluate quantitatively Design Quality Index (DQI) is calculated to assess design quality based on the Objectives Matrix. A case study is performed to illustrate the practical implementation of the design quality evaluation.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.2
• /
• pp.53-61
• /
• 2014

Previous studies reveal the need for a tool to cost estimation of building design in early design stages. This paper proposes an internal finishes cost model tool to address this need. The tool allows users to evaluate the functionality, economics and quality of finishes concurrently with high-rise building design. Lack of information in the early stages of the project enables a relatively accurate estimates of work to raise up. Measurements are automatically extracted from simple design information and profile driven estimates are revised in real-time. The data model uses a flexible unit rate system that can easily be extended to other estimate dimensions such as mix-use building surcharge rate estimation. The approach illustrated in this paper is applicable to BIM tool conceptual estimation that support for massing purposes other than the one chosen for this study.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.832-835
• /
• 2007

The purpose of this study is to suggest the on-the-spot survey method of road occupation information. The on-the-spot survey method is proposed through the analysis of information searching function, document and process. The decision of road occupation permission and the grasp of illegal occupation status are closely connected with national rights and interests. To keep the road occupation permission and illegal occupation status, the easy acquisition of road occupation information is very important. But the person in charge of road occupation have a difficulty in obtaining occupation information because that information is still managed by paper drawing. Accordingly. this study develop the on-the-spot survey tool of road occupation using the occupation information that is managed by Construction Authorization & Permission System and the mobile techniques like UMPC. As the result of this study. the efficiency on the authorization. permission. and public grievance of construction project has improved

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.5
• /
• pp.50-58
• /
• 2017

The efficient communication process is essential to guarantee the completeness of design and secure the quality to meet the contractor's needs. However, using the existing communication methods based on the design and documents, it is difficult to effectively understand the drawings and specifications that are very complicated, and sufficient technical experiences would be required. Ineffective and inefficient communication among users, designers and project participants during the design process would raise the possibility of functional interferences of the object, induce conflicts, cause a design change, and accordingly incur losses of the project in terms of cost and time. The purpose of this study is to suggest improvement direction of communication in accordance with the requirements, by investigating the present state and the project participants' understanding of design communication. And also, it presents the application model of QFD that the project participants could share and define, and feedback the requirements as well as conducting analysis of improvement factors based on the survey.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.933-939
• /
• 2012

In general, the three-dimensional(3D) coordinates of the manufactured ship blocks are measured using the laser measuring equipment by ship engineers. But, many deflections between the measured coordinates in manufactured step and the designed coordinates in the design step are occurred because of the measuring process of ship blocks manually. Thus, the ship engineer should conform the consistency between the measured coordinates and the designed coordinates step by step, and it largely causes the loss of manpower and time. In this paper, the automated pattern matching algorithm of 3D coordinates for quality control in ship blocks is suggested in order to solve this problem, and the performance of the algorithm is analyzed using the 3D coordinates simulation software developed by our research laboratory. The coordinates matching rate of the measured coordinates in the single/multi ship block(s) is about 90.2% under the tolerated distance error range is 20~25cm.

• Economic and Environmental Geology
• /
• v.8 no.4
• /
• pp.175-182
• /
• 1975

The chemical similarity of the magnetite-bearing amphiboltes of the Yangyang iron mine to mixtures of sedimentary pelites and limestone or dolomite and to the Gyeonggi para-amphibolites (So, 1974) is consistently indicated by all the chemical data of the rocks. Eight amphibolite samples were each analyzed for 18 elements, by wet chemical and emission spectroscopic methods, and these chemical data were compared with the para-amphibolites from the Gyeonggi metamorphic complex. Petrography and oxidation ratios were also considered.