• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.839-844
• /
• 2012

Anemometer is a meteorological instrument that measures wind direction and wind speed in real time, and is mounted to the cranes that are used at ports, shipbuilding yards, off-shore structure, or construction sites that are influenced by wind, and it is used in conjunction with the safety system. Load cell-type anemometer measures the wind direction through the ratio of load between 4 positions by mounting the thin plate to 4 load cells, and measures wind velocity through the summation of loads. According to previous research, the load ratio between two adjacent windswept with respect to the wind direction has unstable value due to vortex around windswept. This causes the result that increases an error on the wind direction. In this study we compared and analyzed the difference between the load ratio with respect to three type windswept shapes in order to suggest the proper windswept shape to reduce this error. The computational fluid flow analysis is carried out with ANSYS CFX to analyze the load ratio between three windswept shapes. Wind direction was adopted as the design variable, and selected 9 wind direction conditions from $0^{\circ}{\sim}90^{\circ}$ with $11.25^{\circ}$ interval for computational fluid flow analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.101-110
• /
• 2009

Urban Designers and Planners are interested in creating barrier-free (BF) environments as the demand for social equity increases. BF design consists of design strategies for modifying buildings or facilities to be used by the physically disadvantaged or disabled. To construct buildings or facilities to be "Barrier-free", design standards specifically modified for the physically disadvantaged or disabled should be applied. The purpose of this study is to analyze the BF design standard used in the national laws and provide suggestions for their future improvements. In the study national laws in four countries were reviewed and important BF standards to be used in the laws were identified using a frequency analysis. The results of the frequency analysis were applied to the BF assessment criteria for sidewalk design. Then a field assessment for two sidewalks located in Seoul metropolitan region was conducted using the refined BF criteria. The findings from the field assessments indicated that current regulations were not appropriately designed to provide sufficient convenience for the disabled. It is needed to enhance the BF standards in the domestic regulations to offer sufficient mobility to the physically disadvantaged or disabled.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.233-238
• /
• 2014

In case of the slender mass concrete like attached wall, retaining wall and bridge tower, the low heat cement and the control joint are mainly used for thermal cracking control. However, even if these cracking control methods are considered, it is impossible to control thermal cracks perfectly, because the external restraint is largely in these mass concrete. Because these cracks occurring in slender mass concrete members almost penetrate concrete member, the special cracking control is demanded in these mass concretes. The vertical pipe cooling method improving existing pipe cooling method was developed for the active thermal cracking control of slender mass concrete, and applied at the field attached wall. In results, the maximum temperature dropped more than $10^{\circ}C$ by vertical pipe cooling method, and the cracks decreased about more than 50%.

• Explosives and Blasting
• /
• v.23 no.1
• /
• pp.9-17
• /
• 2005

This study is to clarify the comparative relationship and mechanical anisotropy of granite distributed in the Nam-weon on the subject of weathered rock mass sea water surroundings. Artificial weathering test is defined as a test, which controls the weathering rate and agents by controlling the weathering rate and agents by artificial environmental of salt water. Increased weathering degree is large indicated by weathering salt water, such as apparent specific gravity, absorption, porosity, uniaxial compression strength, P-wave velocity, slake durability, shore hardness, indirect tensile strength(brazilian test) and cohesion were measured. As the Weathering salt water proceeds, cracks develope increasingly. A number the cracks affect the rock deformation. Therefore, stress-strain curve of weathered salt water rock in one confined state are quite differ from weathered fresh water rock those. A reason of their deformation type is the formation of micro-cracks and potential porosity caused by artificial weathering test.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.1 s.23
• /
• pp.177-185
• /
• 2005

The purpose of this study is to develop a supporting tool for efficient management, at preconstruction phase, of the schedule risk that is able to generate at construction phase. The main contents of this study to develop a practical tool are as follows. First steel work was selected as a relevant trade and a risk breakdown structure focused on the process of steel work having large effect on total construction process was made. Secondly, the work flow considering schedule risk factor was made and schedule risks that must be managed preferentially through analyzing the grade of importance for risk was selected. Finally, based on above two procedure, the management form for schedule risk was developed It is necessary to accumulate abundant data for schedule risk for other construction process and to develop a manual and a schedule risk management system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.106-106
• /
• 2019

많은 도심의 하천들은 오염물질의 유입에 취약하다. 최근 신소재 공학 등 첨단산업이 발전하게 되면서 유해화학물질의 유입문제는 더욱 대두되고 있으며, 실제로 최근 유해화학물질 유입사고 발생건수가 늘어나고 있다. 특히 국내 취수량의 90%는 지표수에서 취수하고 있어, 하천오염사고는 직접적인 피해로 이어지게 된다. 따라서 이러한 사고에 대응하기 위하여 수환경에 유입된 유해물질의 거동 매커니즘을 반영한 수질해석이 필요하다. 수체 내에 유입된 유해화학물질은 기본적으로 흐름에 따른 이송 확산을 하며 흡 탈착, 휘발, 침전 부유, 생화학 반응과 같은 다양한 반응과 함께 혼합거동을 한다. 특히 소수성물질의 경우 용해된 상태뿐만 아니라, 유사에 흡착된 상태로 수체에 존재하게 된다. 결국 유해화학물질의 거동을 해석하기 위해서는 유체의 흐름 해석뿐만 아니라 수체에 존재하는 유사의 이송 또한 해석해야한다. 본 연구에서는 흐름해석을 위하여 서울대에서 개발한 흐름모형(HDM-2D)을 사용하였으며, 부유사 거동모의를 위해 부유사거동모형(STM-2D)을 개발하였다. 또한 유해화학물질의 거동모의를 위해 서울대에서 개발한 수질모형(CTM-2D)에 생성/소멸항을 추가하였으며 흐름모형과 부유사모형과의 연계를 통해 유해화학물질의 혼합거동 수치모형을 개발하였다. 각 반응항(흡 탈착, 휘발, 침전 부유, 생화학 반응)을 수치모형에 반영 시에는 보통 두 계(물-토양, 물-공기) 사이의 선형 물질교환으로 이해된다. 따라서 물질의 각 반응 별 평형농도와 물질교환속도계수를 추정식을 통해 산정하여 사용하게 된다. 하지만 각 기작이 반영유무에 따라 계산시간 및 필요입력변수가 늘어나게 되므로, 유해화학물질 유입사고와 같은 빠른 대처가 필요한 경우 각 반응 텀의 유의성을 판단하여 모형에 반영여부를 결정을 통해 경제적인 모의를 할 수 있어야 한다. 이에 따라 본 연구에서는 개발된 모형의 각 매개변수들의 민감도를 분석하고, 흐름조건 및 물질의 특성에 따른 반응항의 유의성을 판단하였다. 본 연구에서는 개발된 모형(부유사거동모형, 유해화학물질의 혼합거동모형)은 해석해 및 현장 데이터와 비교검증을 통해 개발을 완료하였으며, 각 반응항의 민감도 분석을 통해 매개변수의 임계값을 결정하였다.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.407-413
• /
• 2022

In this study, the empirical formula for evaluating cable tension based on long-term measurement for about 3 years according to temperature change was proposed by proving the correlation between the expansion joint displacement of the upper road bridge and the cable tension of the lower railway bridge. The tension prediction results using the empirical formula for tension evaluation each cables proposed in this study were found to be in good agreement with the cable tension using the vibration method within 3%. Therefore, it was analyzed that it could be applied together with the vibration method that was an experimental technique, to predict and evaluate the cable tension in serviced railway steel composite bridge. As a result of applying the estimated temperature calculated by the empirical formula for expansion proposed in this study to the empirical formula, it was analyzed that a high level of reliability could be secured when compared with the vibration method. Therefore, it is judged that the empirical formula for cable tension evaluation reflecting the estimated temperature proposed in this study can be used to predict the tension of cables according to climate change in the future and establish a maintenance plan.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.8
• /
• pp.23-28
• /
• 2022

In Korea, 70% of the land is mountainous and structures occupy a high proportion in railway and road construction. In particular, in recent years, the construction of high-speed railways and highways for high-speed driving is rapidly increasing. At the same time, the construction of tunnels is also increasing. The number of tunnel construction cases in which long-term deformation occurs after tunnel excavation is completed is increasing. The stability of these tunnel structures depends entirely on the characteristics of the rock surrounding the tunnel excavation. In the case of pyroclastic rock, which is the subject of this study, it is generally vulnerable to weathering and has a characteristic that its strength decreases over a long period of time. Tunnel design and construction planning considering the strength characteristics of pyroclastic rocks are essential. This study analyzed the cases of over-deformation that occurred at the tunnel site in the pyroclastic section. Based on this study, a plan for tunnel design and construction management in an area where pyroclastic rock exist in the future is presented.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.89-89
• /
• 2022

하천 합류부에 지천이 유입되는 경우 복잡한 3차원적 흐름 구조를 발생시키고 이로 인해 유사혼합 및 지형 변화가 활발히 발생하게 된다. 특히, 하천 합류부에서 부유사 거동은 하천의 세굴과퇴적, 하천 지형 변화, 하천 생태계, 하천구조물 안정성 등에 직접적으로 영향을 미치기 때문에 이에 대한 정확한 분석이 하천 관리 및 재해 예방에 필수적인 요소이다. 기존의 하천 합류부 부유사 계측 자료들은 재래식 채취 방식으로 수행되어 시공간적 해상도가 매우 낮아서 실측 자료만으로 합류부에서 부유사 혼합을 분석하기에는 한계가 존재하기에 대하천의 부유사 혼합 거동 해석에 수치모형이 주로 활용되어 왔다. 본 연구에서는 하천 합류부에서 부유사 거동을 공간적으로 정밀하게 분석하기 위해 드론 기반초분광 영상을 활용하여 하천 합류부에 최적화된 부유사 계측 방법론을 제시하였다. 현장에서 계측한 초분광 자료와 부유사 농도간의 관계를 구축하기 위하여 기계학습모형인 랜덤포레스트(Random Forest) 회귀 모형과 합류부에서 분광 특성이 다른 두 하천의 특성을 정확하게 반영하기 위한 가우시안 혼합 모형 (Gaussian Mixture Model) 기반 초분광 군집화 기법을 결합하였다. 본 연구에서 구축한 방법론을 낙동강과 황강의 합류부에 적용한 결과, 초분광 군집을 통해 두하천 흐름의 경계층을 명확히 구별하였으며, 이를 바탕으로 지류와 본류에 대해 각각 분리된 회귀 모형을 구축하여 복잡한 합류부 근역 경계층에서의 부유사 거동을 보다 정확하게 재현하였다. 또한 나아가서 재현된 고해상도의 부유사 공간분포를 바탕으로 경계층에서 강한 두 흐름이 혼합되어 발생한 와류(Wake)가 부유사 혼합에 미치는 영향을 규명하였고, 하천 합류부에서 발생하는 전단층의 수평방향 대규모 와류가 부유사 혼합 양상에 지배적 영향을 미치는 것으로 확인하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.341-348
• /
• 2023

In this study, in order to minimize the increase in the amount of various industrial by-products due to the rapid growth of the industry and the intensification of the depletion of natural aggregate resources, the material test using recycled aggregate and steelmaking slag and the proper mixing ratio of recycled concrete were to be derived. In this study, first, the conformity of the quality standards of the materials used in the field was confirmed, and the workability and molding results were shown when used alone or mixed. Therefore, the feasibility of application as aggregate for concrete was evaluated through a total of 4-type mixtures of cement types, admixtures, coarse aggregates, and fine aggregates. As a result of the experiment, it was confirmed that the slump of unhardened concrete, the amount of air, chloride and compressive strength of hardened concrete according to the replacement rate were different from the measured values of general concrete quality characteristics. According to this, it was confirmed that the quality characteristics of the standard design criteria were satisfied.