• Journal of Korea Spatial Information System Society
• /
• v.7 no.2 s.14
• /
• pp.29-38
• /
• 2005

Even though underground conduits have became important city-infra structures which should be exhaustively and efficiently managed, there is few systems which supports the well-defined facility management standards. Due to the lack of the supporting systems, experts must visit underground conduits scattered several cities over the country to see and check the status of the underground conduits including built-in facilities. This type of management gives us a little bit delayed status information at the end of so much time and money costs. In this paper, to solve this problem and manage the conduit synthetically, we developed a web-based facility management system for underground conduits by using information technologies. The developed management system has a simplified map drawing interface to depict the overall architectures and locations of underground conduits and their built-in facilities into sketch maps. And, the system uses the 3D panorama image technology with zooming functions in addition to still images and video images to give the feeling of a spot inspection. Moreover, since the system accumulates the data of repair/reinforcement, occasional inspections and safety diagnosis, conduit managers can synthetically and effectively manage the facilities within underground conduits and themselves.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.37-44
• /
• 2012

There are approximately 25,724 shelters to which people can be quickly evacuated for safety in case of emergency across the nation, and Seoul has about 3,870 shelters. Those nationwide shelters are located at a point within a five-minute radius for quick evacuation. Seoul's shelter capacity can hold 285% of its population. The problem is, however, that there is no knowing how many shelters are reachable within five minutes when considering walking speed according to individual differences in age, height, health state, and physical condition. In addition, available service areas become different according to the spatial allocation and distribution of shelters with possible vulnerable points. This study thus defined the pedestrian walking speed at 1m/s, 1.3m/s, and 2m/s by reviewing previous studies and conducted network analysis of the Location Allocation Model with the designated shelters and road networks in Seoul. The results identified the shelter service and vulnerable areas in each administrative district of Seoul according to walking speeds. It was analyzed that the vulnerable areas in which the elderly could not reach a shelter were more than twice as big as those of adult men and women with a fast walking speed.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.435-440
• /
• 2004

연안침수지도는 태풍이나 해일에 의한 연안침수 발생 시 방조제의 월류 및 붕괴로 인한 예상 침수구역을 강우빈도(200년)별로 나타내고, 침수면적과 깊이를 표현한 지도로서 국외 선진국에서 방재형 국토관리 정책결정과 침수피해에 대한 대민 홍보의 수단으로 활용되고 있다. 국내에서도 연안침수에 의한 피해가 나날이 커지고 국토의 개발에 따른 자연 재해가 많아짐에 따라 보다 방재형 국토개발로 국민의 안전과 복리를 증진하고, 연안침수에 의한 피해를 최소화하기 위한 노력의 일환으로 연안침수지도의 제작 필요성이 증대되고 있다. 본 연구의 시범지역인 대부도 남부지역의 GIS 데이터베이스 구축은 문헌조사 및 기구축 데이터 확보, 지역의 특성에 맞는 신규 GIS 데이터베이스 구축 방법을 제시하였다. 침수구역을 예측하기 위한 모델링을 지원하기 위한 정확도와 경제성, 객관성, 현실성이 높은 지형공간자료의 효율적인 구축이 강조되었다. 구축한 데이터베이스의 세부 유형은 침수위험구역, 침수경계구역, 침수량 화살표이며, 기존에 구축된 데이터를 활용한 레이어는 해안선, 도로, 건물, 등고선, 등심선, 연안 표고점 측량데이터이다. 연안침수지도는 효율적인 재난관리를 위하여 다양하게 활용될 수 있을 것으로 사료되며 나아가 주민의 침수에 대한 경각심 고취와 사전 교육, 지방자치단체의 침수위험 관리업무의 활용이 가능할 것으로 사료된다. 본 연구에서 제작된 연안침수지도는 지자체 주민들을 위해 보기 쉽고 다양한 정보를 얻을 수 있도록 제작되었으며, 이를 위해 사진과 삽화를 추가하여 주민들에게 침수피해에 대한 경각심과 이해를 높이는데 중점을 두었다. 유지관리 후 활용체계 정비의 중요성’을 점검하고, ‘변동자료 발생원인의 분석’, ‘명확한 변동자료 입력 근거의 확보’, ‘갱신주체별 역할의 정의 및 유지관리 기준의 설정’, ‘분야별업무 특성을 고려한 관련 기준의 마련 및 타 시스템과 연계되는 항목을 고려한 절차 정의’ 등에 대한 다양한 접근을 시도하였다. 본 연구에서 제시하는 유지관리 모델을 기반으로 각 지자체별로 적절한 컨설팅이 진행되고 이에 따라 담당자의 실천이 이루어진다면 지자체 GIS의 투자대비 효과에 대한 기대는 이상이 아닌 현실로 다가오게 될 것이다.가오게 될 것이다. 동일하게 25%의 소유권을 가지고 있다. ？스굴 시추사업은 2008년까지 수행될 계획이며, 시추작업은 2005년까지 완료될 계획이다. 연구 진행과 관련하여, 공동연구의 명분을 높이고 분석의 효율성을 높이기 위해서 시료채취 및 기초자료 획득은 4개국의 연구원이 모여 공동으로 수행한 후의 결과물을 서로 공유하고, 자세한 전문분야 연구는 각 국의 대표기관이 독립적으로 수행하는 방식을 택하였다 ？스굴에 대한 제1차 시추작업은 2004년 3월 말에 실시하였다. 시추작업 결과, 약 80m의 시추 코아가 성공적으로 회수되어 현재 러시아 이르쿠츠크 지구화학연구소에 보관중이다. 이 시추코아는 2004년 8월 중순경에 4개국 연구팀원들에 의해 공동으로 기재된 후에 분할될 계획이다. 분할된 시료는 국내로 운반되어 다양한 전문분야별 연구에 이용될 것이다. 한편, 제2차 시추작업은 2004년 12월에서 2005년 2월 사이에 실시될 계획이다. 수백만년에 이르는 장기간에 걸쳐 지구환경변화 기록이 보존되어 있는

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1161-1175
• /
• 2018

An unexpected event could be easily followed by a large secondary accident due to the limitation in sight of drivers in road tunnels. Therefore, a series of automated incident detection systems have been under operation, which, however, appear in very low detection rates due to very low image qualities on CCTVs in tunnels. In order to overcome that limit, deep learning based tunnel incident detection system was developed, which already showed high detection rates in November of 2017. However, since the object detection process could deal with only still images, moving direction and speed of moving vehicles could not be identified. Furthermore it was hard to detect stopping and reverse the status of moving vehicles. Therefore, apart from the object detection, an object tracking method has been introduced and combined with the detection algorithm to track the moving vehicles. Also, stopping-reverse discrimination algorithm was proposed, thereby implementing into the combined incident detection processes. Each performance on detection of stopping, reverse driving and fire incident state were evaluated with showing 100% detection rate. But the detection for 'person' object appears relatively low success rate to 78.5%. Nevertheless, it is believed that the enlarged richness of image big-data could dramatically enhance the detection capacity of the automatic incident detection system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.299-305
• /
• 2019

This study was initiated to solve the difficulties of aged and female workers in agriculture society due to aging and demise of young people. In the case of the conventional elevated lift, the risk of exposure to uneven road or work environment, not the difficulty of professional qualification and operation, and the risk of exposure to the uneven road or working environment, were also studied based on previous researches so that women could easily and efficiently perform productive agriculture. First, the simulation was carried out through the prediction model of traction performance using the object of agricultural forklift, and the soil of the Kimhae city in Gyeongnam (34.125kPa, internal friction angle 35.294deg, external friction angle 13.620deg, Adhesion force 5.750 kPa, average cone index 0-15 cm cl, 1001.8 kPa). In the case of the forklift for simulation, the driving force and the kinetic resistance prediction modeling of the agricultural electric forklift are modeled. Based on this model, the motor control drive adopts the 1232E model, which is a drive dedicated to AC motor, and divides the two drivers into master and slave And the model for the simulation was designed to control motor drive, hydraulic drive, and various outputs on the main PCB. The simulation model is undergoing continuous simulation, modification and supplementation. Based on this research, we will continue research for development of safer and more efficient agricultural electric forklift.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.329-338
• /
• 2024

Purpose: This study verified the safety of the improved box-type girder behavior by comparing and evaluating the bending behavior results of a full-scale specimen based on the analytical behavior of the splice element PSC U-shaped girder with integrated tensioning systems. Method: Based on the results of the service and strength limit state design using the bridge design standard(limit state design method), the applied load of a 40m full-scale specimen was calculated and a static loading experiment using the four-point loading method was performed. Result: When the design load, crack load, and ultimate load were applied, the specimen deflection occurred at 97.1%, 98.5%, and 79.0% of the analytical deflection value. When the design load, crack load, and ultimate load were applied, the crack gauge was measured at 0.009~0.035mm, 0.014~0.050mm, and 6.383~5.522mm at each connection. Conclusion: The specimen behaved linear-elastically until the crack load was applied, and after cracks occurred, it showed strainhardening up to the ultimate load, and it was confirmed that the resistance of bending behavior was clearly displayed against the applied load. The cracks in the dry joints were less than 25% of grade B based on the evaluation of facility condition standard. The final residual deformation after removing the ultimate load was 0.114mm, confirming the stable behavior of the segment connection.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.250-258
• /
• 2007

Current speech recognition technology s achieved high performance with the development of hardware devices, however it is insufficient for some applications where high reliability is required, such as voice control of powered wheelchairs for disabled persons. For the system which aims to operate powered wheelchairs safely by voice in real environment, we need to consider that non-voice commands such as user s coughing, breathing, and spark-like mechanical noise should be rejected and the wheelchair system need to recognize the speech commands affected by disability, which contains specific pronunciation speed and frequency. In this paper, we propose non-voice rejection method to perform voice/non-voice classification using both YIN based fundamental frequency(F0) extraction and reliability in preprocessing. We adopted a multi-template dictionary and acoustic modeling based speaker adaptation to cope with the pronunciation variation of inarticulately uttered speech. From the recognition tests conducted with the data collected in real environment, proposed YIN based fundamental extraction showed recall-precision rate of 95.1% better than that of 62% by cepstrum based method. Recognition test by a new system applied with multi-template dictionary and MAP adaptation also showed much higher accuracy of 99.5% than that of 78.6% by baseline system.

• Smart Media Journal
• /
• v.13 no.3
• /
• pp.18-26
• /
• 2024

Road surface monitoring is essential for maintaining road environment safety through managing risk factors like rutting and crack detection. Using autonomous driving-based UGVs with high-performance 2D laser sensors enables more precise measurements. However, the increased energy consumption of these sensors is limited by constrained battery capacity. In this paper, we propose a fusion sensor system for efficient surface monitoring with UGVs. The proposed system combines color information from cameras and depth information from line laser sensors to accurately detect surface displacement. Furthermore, a dynamic sampling algorithm is applied to control the scanning frequency of line laser sensors based on the detection status of monitoring targets using camera sensors, reducing unnecessary energy consumption. A power consumption model of the fusion sensor system analyzes its energy efficiency considering various crack distributions and sensor characteristics in different mission environments. Performance analysis demonstrates that setting the power consumption of the line laser sensor to twice that of the saving state when in the active state increases power consumption efficiency by 13.3% compared to fixed sampling under the condition of λ=10, µ=10.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.1-14
• /
• 2012

The purpose of this study is to derive a desirable riverfront construction plan to me for the activities of citizens through the evaluation and analysis of the urban riverfront space from the perspective of universal design. Therefore, previous studies were examined in order to induce evaluation tools that bhve been grafted from the universal design concept; in addition, a field survey was conducted in Shincheon, Daegu, which was selected as the study target, in order to induce problems and improvement directions from the perspective of universal design. The major results can be summarized as follows. (1) In the 'fairness' aspect, all the items such as installation of integrated functional signage, showing pictures, symbols, foreign language signs, and restroom entrances signage were determined to be 'All Unsuitable' for all sections; and therefore, it is necessary to improve the fairness of usage for everybody. (2) In the 'Functionality(Usability)' aspect, all items such as installation of bicycle paths beside access roads, installation of integrated functional signs, and night light signs were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the functionalities of these facilities. (3) In the 'Convenience' aspect, all items such as the installation of bicycle parking areas, continuous rest facilities, and back and ann support(handles) at resting facilities were determined to be 'All Unsuitable' for many sections; therefore, it is necessary to improve these facilities for the convenience of usage. (4) In the 'Information(Recognizability)' aspect, all items such as showing pictures, symbols, foreign languages and installation of night light signs, and restroom entrances signage were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the recognizability to minimize misunderstandings and confusion. (5) In the 'Safety' aspect, all items such as the installation of safe pedestrian paths in parking areas, using anti-slip and shock absorption materials on restroom floors, and the continuous installation of pedestrian paths that are separate from bicycle paths were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the safety to prevent accidents. (6) In the 'Amenity' aspect, access roads, parking areas, hygiene facilities, convenience facilities, and waterside facilities for many sections were determined to be 'All Unsuitable'; therefore, it is necessary to conduct more concentrated hygiene management. (7) In the 'Accessibility(Mobility)' aspect, all items such as the installation of safe pedestrian paths in parking areas, and continuous pedestrian paths that are separate from bicycle paths were determined to be 'All Unsuitable' for all sections; therefore, it is necessary to improve the accessibility to provide safety and convenience. (8) In the 'Durability' aspect, access roads, parking areas, rest facilities, convenience facilities, fitness facilities, and waterside facilities were determined to be 'All Unsuitable' for many sections, therefore, it is necessary to improve sunken or damaged areas by inspecting facilities by section.

• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.299-306
• /
• 2018

This study is to measure traveling experience of bike riders whom going long distance trip. Bike paths and bike riding are crucial element for modern people's life style. At the same time, a bicycle trail is being developed by the National Bicycled-Oriented Chair Plan, which was established in 2009 by the National Bike Policy Master Plan. 13 million bike riders in Korea is keep on trying the long distance bike trip and its number is increasing every year. Accordingly, the Ministry of Public Administration and Security decides to promote the convenience of riders by developing bicycle app for long distance rider. The study attempted to assess usability of this app with 39 bike applications whom currently using the bike application. Afterwards, the researchers tests 11 hypotheses through in-depth interviews of six activated members. In sum, Bicycle travelers should be provided with bike trail guidance based on theme section skill, provided in-time speed distance related information, communicated with other bike riders, given tips for bike supplies and maintenance, and provided English language service. The study hopes to help find a customized service for bike travelers.