• Spatial Information Research
• /
• v.6 no.1
• /
• pp.47-63
• /
• 1998

Internet GIS represents the GIS technique that, by integrating Internet and GIS technique, provides geographic information services through Internet environments, Internet GIS suggests that one can search and analyze spatial data through WWW under the dynamic client/ server computing environments, In this paper we introduce the development of a new address management system using GIS technique and a new address information system using Internet GIS, The new address system, which is based on stress name and building number along the street, is developed to complement the current address system which is based on cadastral system, The new address management system is developed for the management of address change due to establishment of roads, construction and destruction of buildings etc using a GIS, The new address information system presents the Internet GIS system which provides people with geographic and address information. By implementing the new address information system it is possible to share GIS data, increase the efficiency of implementation of GIS system, and maximize its usablity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4208-4215
• /
• 2015

Most of the administrative works are executed based on the address. Therefore, spatial information is an essential factor for administrative works. So far, many systems, which apply spatial information to administrative works, have been implemented. However, there is little approach to apply spatial information to road occupation permit works. In this paper, we introduce system implementation plan for applying spatial information to road occupation permit administrative works. System implementation plan includes work analysis, applying scenarios extraction, system function extraction, and datamart construction plans. First, work processes and activities are defined based on the analysis of work handbook. Also, activities are displayed in diagram. Second, scenarios applying spatial information to road occupation permit works are extracted. Third, we derive service functions for system, which realize work processes and applying scenarios. Finally, spatial information datamart construction plan is established. Proposed system implementation plan in this research includes application architecture and part of data architecture. For implementing the system, plan for hardware and software architecture should be studied.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.29-37
• /
• 2018

In recent years, there have been increasing interests in the mobile crowdsourcing that exploits multiple sensors, communication and user interfaces, and the computation power of widespread smartphones. In this paper, we present a novel mobile crowdsourcing-based driver assistance systems (MC-DAS) that crowdsource the sensor data of smartphone app having already passed a road segment, generate its profile information through a massive data processing, and forward this profile to the smartphone app of vehicle entering the road segment. Based on the MC-DAS platform, we also design and implement a new navigation system that advices the vehicle speed depending on the speedbump and on the road curvature profile. We expect that the proposed MC-DAS platform will be used as a platform for emerging new mobile crowdsourcing applications.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.109-120
• /
• 2017

It is important to estimate objectively in the driving test. Especially, the driving test is examined by totally driving ability, rule observation and situational judgement. For this, a grading automation system for driving test was presented by using GPS, sensor data and equipment operation informations. This system is composed of vehicle mounted module, automatic grading terminal, data controller, data storage and processing server. The vehicle mounted module gathters sensor data in the car. The terminal performs automatic grading using the received sensor data according the driving test criterion. To overcome the misposition of vehicle in the map due to GPS error, we proposed the automatic grading system by map matching method, path deviation and return algorithm. In the experimental results, it was possible to grade automatically, display the right position of the car, and return to the right path under 10 seconds when the vehicle was out of the shadow region of the GPS. This system can be also applied to the driving education.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.17-26
• /
• 2010

Maintenance of the roads and bridges is a major issue for all road administrators around the world, and various initiatives are being implemented in each region for the purpose of controlling the ever increasing road maintenance cost while ensuring the safety of the vehicles driving. Efforts for such initiatives have also been made in Asia and initiatives for managing heavy-weight vehicles have recently gained momentum in Korea and Japan. We have developed a technology for unevenly installing bar-shaped sensors (piezo quartz sensors) to enable dynamic axle load measurement at a highly accurate level, and have estimated our measurement accuracy of axle load/gross weight, etc. on an actual road. The measurement accuracy of the axle load/gross weight varies significantly depending on the number of sensors installed. In our implementation, the target accuracy was set to below ${\pm}5%$ for gross weight measurement so that automatic regulation can be applied. We have achieved our target by installing 8-point measurement system. However, to have this technology widely accepted, it was necessary to reduce the system size so that it can be easily implemented. Therefore, we have estimated the relationship between the measurement accuracy and the system size (number of measurement points), and have come up with the proposal of 3-point measurement as an optimum number of measurement points, and have estimated its performance on an actual road. Additionally, we evaluated the relationship between the measurement accuracy and vehicle velocity.

• Science of Emotion and Sensibility
• /
• v.23 no.2
• /
• pp.103-120
• /
• 2020

Using driving simulation, this study investigated the effects of driver's trust in the adaptive cruise control (ACC) system and road density on driver's workload and situation awareness. The drivers were allocated into one of four experimental conditions manipulated by ACC system trust level (trust-increased vs. trust-decreased) and road congestion (high vs. low). The workload and situational awareness of the participants were measured as dependent variables. The results showed followings. First, trust-decreased group for the ACC system had significantly lower trust scores for the system in all of the measurement items, including reducing the driving load and securing safe driving due to the use of this system, than the trust-increased group. Second, the trust-decreased group showed a slower reaction time in the secondary tasks and higher subjective workload than trust-increased group. Third, in contrast, the situational awareness for the driving situation was significantly higher in the trust-decreased group than trust-increased group. The results of this study showed that the driver's trust in the ACC system can affect the various information processing performed while driving. Also, these results suggest that trust in the user's system should be considered as an important variable in the design of an automated driving assistance system.

• Journal of the Society of Disaster Information
• /
• v.8 no.2
• /
• pp.119-137
• /
• 2012

In this study, the damages and condition of road pavement were analyzed using pavement management system (PMS) for the structural improvement. Problems of road pavement management were issued by in-depth interview with workers in charge of plant, construction and supervision. By surveying advanced road pavement management, the way how to improve road pavement management in Seoul was discussed. In conclusion, it is necessary to take measures against road heavy traffic and heavy rain in summer. It was found that the problem of early damages of road pavement due to uniform layout with analyzing life cycle cost (LCC). According to the results of survey, it was suggested to strength practical training and to control precisely the temperature of pavement in the process of production and construction.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.77-83
• /
• 2004

최근 통신, 전자, 제어, 기계등의 첨단기술을 적용하여 도로와 차량 그리고 운전자의 일체화를 통한 교통체계의 효율화, 첨단화, 정보화를 실현하기 위한 ITS(Intelligent Transport System)연구가 많이 진행되고있다. 그러나 이러한 ITS에서의 기본적인 자료인 도로위치정보의 정확도가 낮은 단계인 자료로서 시스템을 구축하고 있다. 또한 기존도로의 설계자료나 수치지도가 없는 지역인 경우가 많아 그 자료들을 획득하는데 많은 비용이 소모된다. 따라서 본 연구에서는 GPS 측위기법과 수치사진측량의 기법으로 도로중심선을 추출하여 보다 정확한 기법을 제시하고자한다.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.155-166
• /
• 2009

Road design safety assessment by existing tools and methods have normally been examined by expert judgements using design documents and on-site inspections. The existing methods, however, have two main problems such as insufficiency of objectiveness and inability to measure effects of accident countermeasures. This paper studies ways to develop a road safety assessment system through reviewing the IHSDM developed in USA. The crash prediction module of IHSDM calculate accident frequency and rate of roadway segments using accident prediction models and accident modification factors for safety evaluation. The methodology of evaluation and development of accident modification factors somewhat overcome the problems of the existing methods. In spite of these advantages, IHSDM could not relevantly reflect characteristics of domestic rural roadways since it overestimate the number of accidents and rate of korean rural roadways. Especially, IHSDM may not evaluate or consider land use patterns of Korean roadways, and futhermore, original environment on base conditions used to develop IHSDM may not be different from ours. The user requirements being developed for a road safety assessment system for Korean roadways include enhanced flexibility and diversity of data input-output processes.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.2
• /
• pp.21-34
• /
• 2021

Considering the role of roads in cities and the purpose of the Road Name Address Act, it is natural that the road name of the address is registered as the nearest road section adjacent to the building. Therefore, the Enforcement Decree of the Road Name Address Act also stipulates that mayor assign building numbers based on the basic numbers of road sections adjacent to the main entrances of buildings. However, there were cases where addresses are given from distant roads rather than adjacent roads among the actual road name addresses. Most of them are caused by misinterpretation of the case where the entrance faces more than one road. In this study, institutional and systematic improvement plans were proposed with the aim of enabling accurate selection of address information reference objects by demonstrating the limitations of the current building numbering method and presenting institutional improvement plans. Road name addresses were implemented for the core purpose of improving the inconvenience of locating the lot number address. Although some still complained of the inconvenience of road name addresses, successful settlement was possible because of the intuitive principle that most countries around the world could use it and find buildings along the road. Therefore, the system and system improvement should be made quickly in terms of accurate address information quality management and revitalization of related industries.