• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.25-34
• /
• 2011

We applied a slope-stability analysis method, considering infiltration by rainfall, to the construction site where an express highway is being extended. Slope stability analysis that considers infiltration by rainfall can be classified into three methods: a method that considers the downward velocity of the wetting front, a method that considers the upward velocity of the groundwater level, and a method that considers both of these factors. The results of slope stability analysis using $Bishop^{\circ}{\Phi}s$ simplified method indicate that the safety factor due to the downward velocity of the wetting front decreases more rapidly than that due to the upward velocity of the groundwater level. For the third of the above methods, the safety factor decreases more rapidly than for the other two methods. Therefore, slope stability during rainfall should be analyzed with consideration of both the downward velocity of the wetting front and the upward velocity of the groundwater level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1937-1943
• /
• 2007

Given the mountainous nature of Korea, cutting slopes are bound to happen. Every you, slope failures lead to enormous human and material losses. More recently, reckless development and subsequent degradation of forests has brought about soil erosion, which coupled with heavy rainfall, contaminates rivers, raises the level of river bottoms and thereby deteriorates their discharge capacity. In Korea, environmental impact assessments and disaster impact assessments have been conducted to come up with proper countermeasures. In order to perform quantitative analysis for this purpose, reliable slope information is quintessential. This study aims to obtain slope-related digital images using an RC model helicopter with a non-metric camera embedded, and to process these images to gain more accurate slope information. To this end, digital images obtained regarding cutting slopes were processed to gain numerical information of slopes and, on the basis of slope information gained here, reliable soil erosion factors were estimated.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2010

Construction of road closed to mountains is inevitable in Korea because the mountainous region in Korea is more than 70% in area. Recently, due to global warming, typhoons or heavy rainfalls frequently occur, and accordingly, mountain roads are seriously damaged by landslides, debris flows, and uplift pressure below pavement. in this study, damage on pavement by uplift pressure was investigated. Various influencing factors such as slope angle, reinforcement of slope surface, thickness of soil cover underlain by rock, and types of drainage system were considered to evaluate uplift pressure acting on the bottom of pavement. Raising of water table up to the surface of slope may depend on the duration and intensity of rainfall. It shows that the installation of subdrain can reduce the uplift water pressure. Therefore, It is concluded that the use of subdrain system is effective to decrease uplift pressure and cement treated base is more endurable than typical crushed-stone base.

• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.517-528
• /
• 2009

Statistical analyses of cut-slope stability were performed over approximately 5.7 km section along the National road No. 25, which cross-cuts in NW-SE direction the Cheongwon and Boeun-Gun area, Chungbuk. A measure of slope-stability was established by using direct reinforcement and indirect protection methods in whole section. Orientations(dip/dip direction) of the slopes, foliations(bedding), cleavages and joints were measured in total of 30 slope sites. The results analyzed using stereographic projection indicate that major directions of the slopes come out predominantly in three directions: 1) $58^{\circ}/095^{\circ}$, 2) $60^{\circ}/296^{\circ}$ and 3) $59^{\circ}/212^{\circ}$. In analyses of dip direction and frequency of cut-slopes established by reinforcement and protection methods, slopes with dip direction of $80-120^{\circ}$ and $280-320^{\circ}$ mostly occur. However, slopes with dip direction of $0-80^{\circ}$(N and NW) and $120-160^{\circ}$(SE) are not distributed in the study area. Failure aspects were analyzed for three major directions of the slopes, respectively. The results of failure aspects analyzed indicate that slopes in the study area could generate various failures as the results of intersection and/or intersection combination among joints, foliations(bedding) and cleavages. However, possibility of failure in a slope of major direction No. 3 is statistically very low because of low frequency in total number of slopes with the direction and of formation of small scale-slopes geographically, although the slope might generate all aspects of failure-modes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.183-188
• /
• 2001

Topographic map is important for the additional detailed construction planning followed by slope sliding. It is a base map that is used to compute the volume of soil, the cost of construction, and check the stability in the area of slope sliding. In this study, 3D topographic data were acquired appling softcopy photogrammetry to the dangerous slope, and the method which can transform these data to the same coordinates system as early TM coordinates was designed. There was a problem when the one meter contour line was made by analysing the image taken from the distance three hundred meters. By solving this problem, this could be used as important data for the planning of road expansion construction. It is expected to be useful for the measurement of various dangerous area in civil engineering works.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.107-114
• /
• 2008

Currently, each managing agencies are enforcing the maintenance against the cutting slopes, but the universality and objectivity are insufficient, because the evaluation item and model are various, the access method is not mutual-supplementary. Consequently, this study will lead the approach for a rational model development, by the analysis against the existing cutting slope evaluation technique, excavate a collapse primary reason and a factor, by the collapse example analysis, and make out evaluation table to decide a investigation priority of the existing cutting slope in the Investigation Evaluation step using AHP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.181-187
• /
• 2011

In this paper, we proposed the vision-based efficient algorithm for road slide detection like as destruction of road cut slope. The proposed algorithm defines the image region as non surveillance and surveillance which is further divided by road, boundary and non road region. After that, it find the moving block, remember the history of movement using the TTL(Time To Live) table, determine the road slide by checking the existence of moving blocks from non road region to road region together. We confirmed the proposed algorithm detected the road slide effectively through experiments.

• Journal of Korean Society of societal Security
• /
• v.1 no.2
• /
• pp.61-66
• /
• 2008

More than 70% of Korea consists of mountainous area and during the construction of roads and railroads many cut-slopes are inevitably formed. A number of environmental factors, such as the rainy season and frost heave during winter/thaw during spring, can result in rock falls and landslides. The failure of slopes is increasing every year and can cause damage to vehicles, personal injury and even fatality. In order to help protect people and property, there is a need for real-time monitoring systems to detect the early stages of slope failures. In this respect, the GMG has been using Translation Rotation Settlement (TRS) sensor units installed on slopes to monitor movement in real-time. However, the data lines of this system are vulnerable and the whole system can be damaged by a single lightning strike. In order to overcome this, GMG have proposed the use of Ubiquitous Sensor Networks (USN). The adoption of a USN system in lieu of data cables can help to minimize the risk of lightning damage and improve the reliability of slope monitoring systems.

• The Journal of Engineering Geology
• /
• v.22 no.2
• /
• pp.157-171
• /
• 2012

The slope design of an open-pit mine must ensure slope stability and economic feasibility. The overall slope angle of the pit is therefore the main factor of concern because of limited support or reinforcement options available in such a setting. This study examines the optimal measurement system for monitoring the behavior of the slope in an open-pit mine using displacement measurement, data analysis, and numerical simulations for a coal mine at Pasir, Indonesia. The area of slope to be managed is extensive and the maximum displacement, as calculated by numerical analysis, is about 3,000 mm. The displacement data, measured by inclinometer and GPS, were analyzed, and the applicability of SSR (slope stability radar) was reviewed in comparison with other monitoring systems.

• Proceedings of the KSEE Conference
• /
• 2007.10a
• /
• pp.61-66
• /
• 2007

터널발파 및 도로사면에서 보다 더 적극적인 파단면형성을 위해 윙홀 발파(Wing-Hole Blasting, WHB)가 제안된 바 있으며 최근 현장에 적용단계에 와있다. 본 연구에서는 WHB 발파설계에 필요한 기초자료를 얻기 위한 목적으로 노치를 가진 발파공을 모델화하여 주변 암반의 파괴과정을 수치해석적으로 검토하였다.