• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.91-99
• /
• 2008

In this paper, we design the function of ULSLE(Upper Layer Shared LAN Emulation) to provide both the efficient LAN service and compatibility with 802.1D bridge in Hybrid two-stage AWG based WDM-PON. The ULSLE layer lies above MAC control layer in order to provide a mean to interface WDM-PON and 802.1D bridge. It also performs LAN emulation based on PON-Tag which is only used to decide both the transmission mode and the destination of frames transmitted from ONUs. That is, the PON-Tag is not used for downstream frames but destination address field in original frame instead. This decreases the processing overhead and complexity caused by PON-Tag at OLT and ONU. The verification of designed ULSLE is performed according to the specific scenarios based on transmission mode and destination using OPNET.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.387-402
• /
• 2014

In congested urban areas, constructions of tunnel structures have became necessary due to a lack of surface space. The excavation of any tunnel generated the ground disturbances of surrounding ground and displacements is major concern. Therefore, a study of tunnel stability is necessary. In this study, the authors have investigated the stability and failure pattern of tunnel through the model tunnel test. In this study, the close range photogrammetry was used to measure the ground deformation. The measured data was converted to displacement vectors and contours. And then it compared to FE analysis and empirical formula. In addition, this study presented the comparison between steel pipe reinforced model tunnel and unreinforced model tunnel. The ground deformation for both the steel pipe reinforced model tunnel and the unreinforced model tunnel was analysed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.807-813
• /
• 2016

Recently, a spherical pendulum attached to an end-effector of a robot manipulator has been frequently used for a test bed of residual vibration suppression control in a multi-dimensional motion. However, there was no automatic tracking system to detect the current bob position on-line, and there was inconvenience to not be able to store the bob position in real time and plot the trajectory. In this study, we developed a two-dimensional, real-time bob-detecting system using a digital USB camera, of which the key is hardware component design and software C programming for fast image processing and interfacing. The developed system was applied to residual vibration suppression control of a two-dimensional spherical pendulum that is attached at the end-effector of a two degree-of-freedom SCARA robot, and the effectiveness of the developed system has been demonstrated.

• The KIPS Transactions:PartA
• /
• v.14A no.4
• /
• pp.215-226
• /
• 2007

For past years, many distributed virtual shared-memory(DVSM) systems have been studied in order to develop a low-cost shared memory system with a fast interconnection network. But the DVSM needs a lot of data and control communication between distributed processing nodes in order to provide memory consistency in software, and this communication overhead significantly dominates the overall performance. In general, the communication overhead also increases as the number of processing nodes increase, so communication overhead is a very important performance factor for developing a large-scale DVSM system. In this paper, we study the performance scalability quantitatively and qualitatively for developing a large-scale DVSM system based on the next generation interconnection network, called the InfiniBand. Based on the study, we analyze a performance requirement of the next-coming interconnection network to be used for developing a performance-scalable DVSM system in the future.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.80-86
• /
• 2005

Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment. Safety, reliability, efficiency, and performance are some of the major concerns of induction motor applications. Fault tolerant control (FTC) strives to make the system stable and retain acceptable performance under the system faults. All present FTC method can be classified into two groups. The first group is based on fault detection and diagnostics (FDD). The second group is includes of FDD and includes methods such as integrity control, reliable stabilization and simultaneous stabilization. This paper presents the fundamental FDD-based FTC methods, which are capable of on-line detection and diagnose of the induction motors. Therefore, our group has developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. This paper presents its architecture. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module processes the stator current, voltage, temperatures, vibration signal of the motor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.218-224
• /
• 2013

Generally, SAW device, which uses Time Domain Sampling, requires high speed A/D converter because SAW device using TDS needs high sampling speed as much as its high data speed. However, the high price of A/D converter discourages makers from using it. On the other hand, SAW device, which uses Frequency Domain Sampling, does not required high speed A/D converter because SAW device using FDS does not need high sampling speed. It is very efficient in price comparison to its performance because high processing speed of SAW device using FDS can be implemented using low price Embedded Systems. The purpose of the paper is to solve the issues above by designing and realizing SAW device(FDS) using SAW sensor for TDS.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.1
• /
• pp.25-32
• /
• 2018

Due to heavy computational cost, deformable object simulation requires more effective collision detection method than rigid body simulation. However, when the CPU-based collision detection algorithm is purely applied to the GPU environment, the collision detection algorithm and the data structure optimized for the GPU environment are essential because the performance of the GPU can not be used properly. Therefore, we propose a GPU-based parallel collision detection algorithm for mass-spring system which is widely used for deformable object representation in this paper. The proposed method uses a parallel algorithm and data structure to reduce collision detection cost through GPU-based curling algorithm using AABB-Octree structure. In this paper, we prove the effectiveness of the proposed method by comparing the intersection test of all triangle pairs in parallel. The results of experimental tests show that the proposed method improves the performance by about 24% on average. Therefore, it is expected that the proposed method can improve the performance of real-time simulation for deformable objects.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.3
• /
• pp.195-198
• /
• 2013

Many libraries utilize RFID tags for checking in and out of books. However, the recognition rate of this automatic process may depend on the orientation of antennas and RFID tags. Therefore we need supplemental systems to improve the recognition rate. The proposed algorithm sets up the ROI of the book existing area from the input image and then performs Canny edge detection algorithm to extract edges of books. Finally Hough line transform algorithm allows to detect the number of books from the extracted edges. To evaluate the performance of the proposed method, we applied our method to 350 book images under various circumstances. We then analyzed the performance of proposed method from results using recognition and mismatch ratio. The experimental result gave us 97.1% accuracy in book counting.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.125-134
• /
• 2023

In this paper, we propose an efficient surveillance RADAR(RAdio Detection And Ranging) interface control unit(ICU) design in the naval combat system. The proposed design applied a standardized architecture for modules that can be shared in ship combat system software. An error detection function for each link was implemented to increase the recognition speed of disconnection. Messages that used to be sent periodically for human-computer interaction(HCI) are now only transmitted when there is a change in the datagram. This can reduce the processing load of the console. The proposed design supplements the radar with the waterfall scope and time-limited splash recognition in relation to the hit check and zeroing of the shot when the radar processing ability is low due to the adoption of a low-cost commercial radar in the ship. Therefore, it is easy for the operator to determine whether the shot is hit or not, the probability of wrong recognition can be reduced, and the radar's resources can be obtained more effectively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.2
• /
• pp.289-299
• /
• 2024

Blockchains are not efficient for real-time processing because the growing number of transactions and users delays many computations and network communications. This study proposes a cloud proxy server, so that legitimate users can use blockchain as well as reduce network latency. To proceed with a blockchain transaction, the blockchain copy server verifies all transaction-related data, but the cloud proxy server verifies legitimate users with a simple zero-knowledge proof algorithm, enabling efficient blockchain real-time processing. The cloud proxy server can support blockchain anonymity, security, and scalability that can verify legitimate users with the proposed zero-knowledge proof by receiving the registered key pair of the blockchain user. In the proposed research analysis, blockchain-based cloud proxy server reduces network latency compared to previous studies and key processing on cloud proxy servers reduces the cost of key computation compared to previous studies.