• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.33-36
• /
• 2001

In MC-CDMA systems effects of delay spread of the channel are reduced with increased symbol duration by simultaneously transmitting data symbols on the parallel subcarriers. However, the increased symbol duration causes the system to be more vulnerable to time selective fading. In this paper, we investigate the effects of time selective fading characteristics of the mobile channel from the viewpoint of desired signal power to inter-carrier interference power ratio at the combiner output of the MC-CDMA receiver.

• Journal of the KSME
• /
• v.29 no.5
• /
• pp.507-519
• /
• 1989

랜덤 신호의 앙상블 통계 처리 방법은 학교 실험실에서나 연구소 실험실 및 산업계 현장의 계측 시스템에 있어서 그 적용 가능성이 매우 커 이에 대한 파급성이 매우 증가할 것으로 생각된다. 특히 본 방법은 값싼 계측 기자재 등으로 구성하여 보다 정확한 자료를 추출함에 있어 최대의 효과를 내고자 한 점이 가장 크게 평가될 수 있을 것으로 사료된다. 한편 열. 유체 유동중 난류 계측에 본 방법을 적용하였을 경우 얻을 수 있는 결과들은 무엇보다도, 열선풍속계, A/D변환기, 컴퓨터 등으로 온라인이 가능하여 유동장내 임의 한 위치에서 분석에 필요한 많은 데이터들은 랜덤신호의 동시 계측 및 연산을 통해 쉽게 얻을 수 있으므로, 한 점을 통과하는 난류 랜덤 신 호로부터 통계학적인 난류 유동 특성의 거동을 보다 쉽게 분석할 수 있다는 점이다. 또한 본 방법을 이용하면, 압력 변환기 및 열전대에서 발생되는 랜덤 신호로부터 열. 유체 유동 등을 통 계학적으로 보다 광범위하게 분석할 수 있게 된다. 끝으로 본 연구에서 언급한 랜덤 신호의 앙 상블 개념의 통계 처리 방법은 현재 널리 보급된 소형 컴퓨터 IBM-ST/AT급에서도 쉽게 적용이 가능하기 때문에 많은 이용이 될 것으로 기대되는 바이다.

• Annual Conference of KIPS
• /
• 2018.05a
• /
• pp.484-485
• /
• 2018

DAC 는 디지털-아날로그 변환 회로는 디지털 전기 신호를 아날로그 전기 신호로 변환하는 전자 회로이다. 특히 최근 음성 신호는 그 효율성 및 경제성 때문에 디지털 데이터 형태로 저장/전송되고 있어 DAC 는 음성 관련 사업에서 필수적으로 쓰이고 있다. 본 논문은 음성 신호의 디지털-아날로그 변환 시 DAC 의 성능에 대한 분석 및 시험 결과를 소개한다.

• Annual Conference of KIPS
• /
• 2015.04a
• /
• pp.1046-1048
• /
• 2015

본 논문은 웨어러블 디바이스의 한 종류로써의 스마트와치에 적용할 수 있는 헬스케어 기술에 대한 제안이다. RED LED와 IR LED를 통해 얻어진 신호로부터 아날로그 필터 증폭을 통해 얻어진 PPG신호를 이용하여 생체신호인 심박수와 $SpO_2$를 측정하여 보았다. 이 신호를 블루투스 통신을 통해 PC에서 데이터를 받아 보았고, 추후에 스마트폰과 연동하여 실용적으로 사용 될 수 있다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.162-167
• /
• 2015

This paper describes the reason and the problem solving for the double-layer pattern of a Daejeon correlator operated in Korea-Japan Correlation Center. When the electric power of an input signal in the correlator is charged small enough to be buried in the noise, it is hard to see a signal with a specific pattern in the input signal, but when the electric power is large, a specific one is reported to be seen. By comparing data from observation with one from software correlator, it was confirmed from the analysis using the AIPS software that the amplitude gain of a source signal was affected about 3%. Therefore, in order to solve the problem of double-layer patterns, we found that a problem in the memory management module responsible for both the data input and the data serialization of the correlator is a cause for the double-layer pattern detected periodically. In other words, while data is serialized and read repeatedly in the memory area assigned to serialize the data from the serialization module, redundant last data is generated and an overlap for the memory allocation is occurred. Therefore, by modifying the program of the FPGA memory sections on serialization module to correct the problem, we confirmed that double-layer pattern is disappeared and correlation results are normally acquired.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.5
• /
• pp.25-28
• /
• 1978

This paper deals with the development research on the application of the principle of polyphase envelope detectioal),2) to extract the envelope from the complex physiological signal waveforms, which otherwise would be very difficult to observe and determine. In order to verify the developed system, the experimental results are included.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.1
• /
• pp.63-71
• /
• 2017

In this paper, a signal processing circuit for semi-implantable middle ear hearing device is designed using the TCBT which is recently proposed for a new middle ear transducer that can be implanted at round window of cochlea. The designed semi-implantable hearing device transmits digital sound signal from external device located at behind the ear to the internal device implanted under the skin using inductive coupling link methods with high efficiency. The coils and signal processing circuits are designed and implemented considering the total transmission and reception distance including skin thickness of temporal bone for the semi-implantable hearing device. And also, to improve the data transmission efficiency, the output circuits which can supply sufficient signal power is designed. In order to confirm operation of semi-implantable hearing device using inductive coupling link, the circuit analysis was performed using PSpice, and the performance was verified by implementing a signal processing board of an available size.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.195-200
• /
• 2008

To compress the moving picture data effectively, it is needed to reduce spatial and temporal redundancy of input image data. While motion estimation! compensation methods is effectively able to reduce temporal redundancy but it is increased computation complexity because of the prediction between frames. So, the study of algorithm for computation reduction and real time processing is needed. This paper is presenting quantizer effectively able to quantize DCT coefficient considering the human visual sensitivity. As quantizer that proposed DCT-based H.263 could make transmit more frame than TMN5 at a same transfer speed, and it could decrease the frame drop effect. And the luminance signal appeared the difference of $-0.3{\sim}+0.65dB$ in the average PSNR for the estimation of objective image quality and the chrominance signal appeared the improvement in about 1.73dB in comparision with TMN5. The proposed method reduces $30{\sim}31%$ compared with NTSS and $20{\sim}21%$ compared to 4SS in comparition of calculation quantity.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.16-26
• /
• 2006

GNSS is a satellite-based radio navigation aid. For using it in civil air navigation area, any GNSS service should meet the requirements of accuracy, integrity, continuity and availability in each flight phase established by ICAO. In this study, a remote integrity monitoring system(RIMS) for GNSS are proposed and explained to utilize it in the design of GNSS augmentation system such as GBAS and GRAS. The RIMS consists of signal-in-space receiving subsystem and signal processing subsystem. Each GPS receiver is connected to Host PC by the serial to ethernet converting device which is able to convert serial port connection to LAN port connection in order to exchange information via the internet. We can overcome the siting limitation of GPS receiver and antenna, and reduce signal loses in the cable between GPS antenna and receiver. This system is providing the development environment for GBAS CAT-I system.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.149-153
• /
• 2008

General underwater target detection methods adopt short-time FFT for estimate target doppler. This paper proposes the efficient target detection method, instead of conventional FFT, using approximate FFT for distributed sensor network target detection, which requires lighter computations. In the proposed method, we decrease computational rate of FFT by the quantization of received signal. For validation of the proposed method, experiment result which is applied to FFT based active sonar detector and real oceanic data is presented.