• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2E
• /
• pp.91-97
• /
• 1995

This paper describes the implementation of a multi-channel audio codec for HETV. This codec has the features of the 3/2-stereo plus low frequency enhancement, downward compatibility with the smaller number of channels, backward compatibility with the existing 2/0-stereo system(MPEG-1 audio), and multilingual capability. The encoder of this codec consists of 6-channel analog audio input part with the sampling rate of 48 kHz, 4-channel digital audio input part and three TMS320C40 /DSPs. The encoder implements multi-channel audio compression using a human perceptual psychoacoustic model, and has the bit rate reduction to 384 kbit/s without impairment of subjective quality. The decoder consists of 6-channel analog audio output part, 4-channel digital audio output part, and two TMS320C40 DSPs for a decoding procedure. The decoder analyzes the bit stream received with bit rate of 384 kbit/s from the encoder and reproduces the multi-channel audio signals for analog and digital outputs. The multi-processing of this audio codec using multiple DSPs is ensured by high speed transfer of date between DSPs through coordinating communication port activities with DMA coprocessors. Finally, some technical considerations are suggested to realize the problem of real-time operation, which are found out through the implementation of this codec using the MPEG-2 layer II sudio coding algorithm and the use of the hardware architecture with commercial multiple DSPs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.762-769
• /
• 2007

Adaptive MIMO-OFDM (Orthogonal Frequency Division Multiplexing) system adaptively changes modulation scheme depending on feedback channel state information (CSI). The CSI feedback channel which is the reverse link channel has multiple symbol delays including propagation delay, processing delay, frame delay, etc. The unreliable CSI due to feedback delay degrades adaptive modulation system performance. This paper compares the MSE and data capacity with respect to delay and channel signal to noise ratio for the two multi-step channel prediction schemes, CTSBP and BTSBP, such that robust adaptive SISO-OFDM/MIMO-OFDM is designed over severe mobile multipath channel conditions. This paper presents an interpolation method to reduce feedback overhead for adaptive MIMO-OFDM and shows MSE with respect to interpolation interval.

• Journal of Korea Multimedia Society
• /
• v.16 no.8
• /
• pp.962-971
• /
• 2013

In this paper, we propose a method to infer the user's behavior and situation through collected data from multi-sensor equipped with a smart clothing and it was implemented as a smart-phone App. This smart-clothes is able to monitor wearer users' health condition and activity levels through the gyro, temp and acceleration sensor. Sensed vital signs are transmitted to a bluetooth-enabled smart-phone in the smart-clothes. Thus, users are able to have real time information about their user condition, including activities level on the smart-application. User context reasoning and behavior determine is very difficult using multi-sensor depending on the measured value of the sensor varies from environmental noise. So, the reasoning and the digital filter algorithms to determine user behavior reducing noise and are required. In this paper, we used Multi-black Filter and SVM processing behavior for 3-axis value as a representative value of one.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.2 s.302
• /
• pp.39-48
• /
• 2005

In this paper, we implement the multimedia remote control system by using existing internet service or wired online. We also provide user-friendly convenient environment with developed application program named EzPlay and PC-EPG. The multimedia remote control system consists of integrated wireless transceiver of PC and TV connected USB type and the users can easily use lots of contents because EzPlay program provides appropriate UI mode on the PC and TV screen. The unposed system can operate real-time playing, reserved video receding and data storing function using internet mesh based on signal detecting control theory. The PC-EPG system is implemented by server/client web program and the client program based on visual C++/MFC processes data storing in client computer through TCP/IP. It also provides intelligent function that constructs database according to user's preference.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.49-59
• /
• 2018

Smart grid system has been deployed fast despite of legal, business and technology problems in many countries. One important problem in deploying the smart grid system is to protect private smart meter readings from the unbelievable parties while the major smart meter functions are untouched. Privacy-preserving involves some challenges such as hardware limitations, secure cryptographic schemes and secure signal processing. In this paper, we focused particularly on the smart meter reading aggregation,which is the major research field in the smart meter privacy-preserving. We suggest a noisy weighted aggregation scheme to guarantee differential privacy. The noisy weighted values are generated in such a way that their product is one and are used for making the veiled measurements. In case that a Diffie-Hellman generator is applied to obtain the noisy weighted values, the noisy values are transformed in such a way that their sum is zero. The advantage of Diffie and Hellman group is usually to use 512 bits. Thus, compared to Paillier cryptosystem series which relies on very large key sizes, a significant performance can be obtained.

• KIISE Transactions on Computing Practices
• /
• v.24 no.2
• /
• pp.59-66
• /
• 2018

In this paper, we propose a system to detect various damage automatically inflicted on road pavement by collecting and analyzing data from acceleration and camera sensors in real time. The proposed system sends the collected images, acceleration signals, and GPS coordinates to the road manager and the database in the remote server, shortly after detecting the damage to the road pavement. Our study makes three key contributions. The proposed system 1) enables road managers to maintain road conditions quickly, accurately, and conveniently; 2) allows road mangers to take care of various kinds of damage to the road pavement at the initial stage; and finally 3) even makes it possible to track the damage, which suggests that the integration of a high-level decision support function becomes affordable. We tested the sensitivity and precision of the proposed system against real-time data obtained from the vehicles driving on the highway at an average speed of 100 km/h. With ten iterations, the proposed system achieved an average sensitivity of 74% and an average precision of 84% in road pavement damage detection, which is comparable with the best competing schemes.

• Journal of Internet Computing and Services
• /
• v.4 no.3
• /
• pp.47-55
• /
• 2003

Multicast protocols ore developed in order to support group communications efficiently, However. there still exist some issues to be solved for deploy multicast protocol in the public internet. This paper refers problem of existing Reliable Multicast Protocols and redesigns component function, and proposes enhanced reliable multicast transport protocol, This paper proposed a improved multicast transport scheme in NACK based reliable multicast. This scheme is much faster than by sender-initiated or receiver-initiated recovery and latency is smaller. Designed components are implemented in UNIX environment using C programming longuage. Then the protocol was evaluated performance through simulation. As the result, proposed protocol is better than existing protocols in both of transmission delay and packet loss. Especially, proposed protocol in this paper con be used in multicast services needed high reliability.

• Journal of the Korean Data and Information Science Society
• /
• v.8 no.2
• /
• pp.163-171
• /
• 1997

Function approximation from a set of input-output pairs has numerous applications in scientific and engineering areas. Multilayer feedforward neural networks have been proposed as a good approximator of nonlinear function. The back propagation(BP) algorithm allows multilayer feedforward neural networks to learn input-output mappings from training samples. It iteratively adjusts the network parameters(weights) to minimize the sum of squared approximation errors using a gradient descent technique. However, the mapping acquired through the BP algorithm may be corrupt when errorneous training data we employed. When errorneous traning data are employed, the learned mapping can oscillate badly between data points. In this paper we propose a robust BP learning algorithm that is resistant to the errorneous data and is capable of rejecting gross errors during the approximation process, that is stable under small noise perturbation and robust against gross errors.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.29-36
• /
• 2015

Exact comparisons of the thermal conductivities of the base fluid and a nanofluid are very important in the early stages of nanofluid development. A simple procedure of measuring the thermal conductivity of the two fluids by the transient hot wire method and numerically dividing these values is used for this purpose. However, because the experiments are not performed simultaneously and the physical properties of the measurement system are sometimes not properly known, large errors are incurred during the evaluation process. This article proposes a new apparatus for thermal conductivity comparison where the working principle is mainly based on relative measurement rather than absolute measurement. The measuring circuit and data processing steps are explained in detail; a validation test was performed using the well-known glycerine and engine oil.

• Korean Journal of Cognitive Science
• /
• v.22 no.4
• /
• pp.347-364
• /
• 2011

In this paper, we propose a automatic image bases extraction method for visual image reconstruction from brain activity using Non-negative Matrix Factorization (NMF). Image bases are basic elements to construct and present a visual image. Previous method used brain activity that evoked by predefined 361 image bases of four different sizes: $1{\times}1$, $2{\times}1$, $1{\times}2$, $2{\times}2$, and $2{\times}2$. Then the visual stimuli were reconstructed by linear combination of all the results from these image bases. While the previous method used 361 predefined image bases, the proposed method automatically extracts image bases which represent the image data efficiently. From the experiments, we found that the proposed method reconstructs the visual stimuli better than the previous method.