• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.91-99
• /
• 2017

The purpose of this study was to clarify the differences between the K-pop and B-boy dancers'characteristics based on the biomechanical variables through the isolation movement by independent variable t-test using spss 18.0. As a result, first, the CoM composite displacement of the K-pop dancer was larger than that of the B-boy(p<.05) in phase1 and phase2. Second, in phase2 and phase3, the movement speed of CoM was faster in K-pop dancer than in B-boy(p<.05). Third, in phase1, the planar angle between the body and pelvis was greater in the right planar angle of the K-pop dancer, while in the phase2 and phase3, the left planar angle of the B-boy was larger(p<.05). Fourth, the composite hip joint moments of B-boy were larger than those of K-pop in phase1, However, K-pop dancers showed greater moments in phase2, phase3 and phase4, and ankle joint moments in phase3(p<.05). Thus, even with the same isolation, we found that K-pop and B-boy dancers performed differently.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1144-1149
• /
• 2008

Converting technology has developed to print information for the decades. Recently, this technology (like gravure, gravure-offset) is rising as an alternative way for mass production of printed electronics such as RFID, solar cell. For the width of printing line is under 10 microns, registration error should be minimized less than several microns. Tension disturbance is main cause of registration error and this should be minimized before the substrate is transported into printing zone. With PI controller, it is possible to suppress the disturbance within 2% of operating tension. But register error appears more than 10 micron using PIcontroller considering noise. So LQG controller is needed as an alternative control method. In this paper, the comparision of PI and LQG controller in the converting machine including measured noise and tension disturbance is presented. It is shown that the LQG controller is more suitable for precision tension control in printed electronics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.21-22
• /
• 2008

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.70-76
• /
• 2009

Web tension control system recently have been applied to OLED(Organic Light-Emitting Diode), RFID of flexible material, e-Paper and PLED(Polymeric LED) and various web control algorithms have being developed for higher productivity and product quality These system need an accuracy model to design and implement controller. In this paper, the web tension control system with dancer roll is mathematically modeled. Mathematical model consists of 8 subsystems and each subsystems can be described as impedance structure which connected by velocity and tension. Mathematical model is different from the estimated model at high frequency range because of structure dynamics which is ignored on mathematical model. The estimated model is derived using ARMAX model. The controller is designed using the estimated model. The step response of the estimated model are compared with that of physical model for a validation of estimated model. The experimental results show a good match between them.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.65-73
• /
• 2009

For mass production of printed electronics in roll-to-roll fashion, precision tension control is important to reduce register errors. Register error should be minimized within several to tens of microns for many electronic devices to be manufactured through printing technology. In order to achieve this goal, tension disturbance must be attenuated before printing process within a certain range. In this paper, a certain tension range which allows maintaining register error within 10 micron was defined with specific operating conditions. A LQG controller was proposed instead of the conventional PI controller for precision tension control using a multivariable feedback. A guideline to determine design parameters for calculating LQ gain was proposed. The proposed LQG controller was compared to both PI controller and LQ regulator with white noise by numerical simulations. Results showed that the proposed LQG controller was effective for attenuating tension disturbance with white noise.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.246-248
• /
• 2009

본 논문에서는 장력 검출 장치(로드셀, 댄서 등) 가장착되어 있는 생산 설비에서 강선, 강판, 제지, 섬유, 비닐 등과 같은 소재의 장력을 정밀하게 제어하기 위한 인버터의 장력 제어 전용 PID 제어기와 직경 또는 소재의 두께를 실시간으로 추정하여 인버터의 출력 주파수를 보정하는 추정기를 제안한다. 본 논문에서 제안된 방법을 다양한 용량(0.37kW~160kW) 대의 인버터에 탑재하여 실제 부하에 적용함으로써 산업 현장에서 요구하는 수준이상의 우수한 제어 성능을 나타냄을 확인하였다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.873-878
• /
• 2007

Stability of high-speed roll-to-roll printing machines is one of the most important factors that are required for the printing machines to operate properly and to obtain reasonable printing performance. This paper proposes a new model for the web-tension system of a high-speed gravure printing machine considering span-length variations due to dancer rollers, and analyzes the stability of plant dynamics of the printing machine using the proposed model. Span-length variations due to dancer motions are considered for the modeling of plant dynamics in two ways; one is to include the effect of span-length variations without considering dancer inertias and viscous frictions, and the other is to include the effect of span-length variations with considering dancer inertias and viscous frictions. The stability of the plant model is analyzed for various web-speeds using the eigenvalues of the linearized model about operating points.

• 한국HCI학회:학술대회논문집
• /
• 2007.02c
• /
• pp.176-182
• /
• 2007

본 연구에서는 사용자가 즉석에서 연주한 곡에 대응하는 춤 동작을 자동으로 생성하는 기술을 제안한다. 본 기법은 먼저 댄서로부터 모션 캡쳐 받은 춤 시퀀스를 분절화한 후 사용자가 신디사이저를 통해 직접 연주하여 얻은 MIDI 데이터를 분석해 음악에서의 특징점을 추출한다. 그리고 분절화 한 모션의 세그먼트들을 음악에 맞춰 다시 배열하여 새로운 춤 시퀀스를 생성함으로써 사용자가 연주한 음악과 어울리는 춤 동작을 자동으로 생성한다. 이를 위해 세 단계의 작업을 수행하게 되는데, 첫 번째 단계에서 모션 캡쳐를 통해 얻게 된 데이터에서 캐릭터의 위치와 자세를 기준으로 하여 긴 시퀀스를 의미 있는 작은 춤 동작으로 분절화한다. 두 번째 단계에서는 사용자의 연주를 통해 획득한 MIDI를 분석하여 특징점을 추출하고, 마지막 단계에서는 이를 바탕으로 음악에 기반한 음악과 동작을 합성한다. 본 연구는 음악과 댄스의 리듬감이 파괴되지 않도록 합성함으로써 우리의 연구는 기존 연구에 비해서 훨씬 자연스러운 춤 시퀀스를 결과물로 만들어 낸다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.486-487
• /
• 2018

본 논문에서는 다선형 PCA(Principal Component Analysis)를 이용한 키넥트 센서 기반 댄스 모션분류방법을 제안한다. 댄스 모션 분류를 수행하기 위해서, 먼저 키넥트 데이터 깊이 영상과 이진영상을 보간법을 통해 데이터의 크기를 정렬시켜준다. 다음으로 다선형 주성분 분석 기법 (MPCA)을 이용하여 연속된 댄스모션영상들에 대한 특징을 추출하고, 유클리디안 분류기를 통해 클래스 분류한다. 본 실험에 사용된 데이터베이스는 키넥트 센서를 기반으로 전문 댄서 4명을 통해 취득된다. 총 100곡의 K-POP을 선정하였고, 곡마다 2개의 포인트 안무를 통해 총 200개의 포인트 댄스모션 데이터베이스를 구축하였다. 실험결과 제안된 방법은 89.5%의 성능을 나타낸다.

• Trans-
• /
• v.6
• /
• pp.97-127
• /
• 2019

This study investigated the specific effects of dance themed movies on dance students in their passion for dance and affect. The related data is generated by choosing a method of Convenience Sampling and used a sample of 112 dance students in high school of arts which located in Seongnam-si, South Korea. The dance students divided into 3 group of school year and also 2 group of gender. The dance themed movies which are used in this research are First Position, Billy Elliot and Mao's Last Dancer. Also, the dance students were asked to answer the survey which are based on the Self-administration. In order to obtain several findings below, Frequency analysis, Exploratory factor analysis, Reliability analysis, t-test, ANOVA, Correlation analysis and Linear structural relation model were applied to the gathered data using statistics utility SAS 9.4. First, there was a significant difference between the school years in the passion for dance and affect of students after watching movies. Second, there was a significant difference in students' affect depended on their majors (dance major is divided into three specialized major which are ballet, korean dance and modern dance). Third, there was a significant difference in the passion for dance and students' affect which is irreverent to their dance career (such as years they have learned dance). Forth, there was a significant difference in the passion for dance and negative affect of 'dance' students after watching movies. To summarize, the findings demonstrate that there is a partial difference, specially significant effects on their negative affect in the dance passion and affect of dance students depended on their characteristics after watching dance themed movies.