• Korean Journal of Acupuncture
• /
• v.38 no.4
• /
• pp.308-316
• /
• 2021

Objectives : This study aimed to develop a cupping pressure control valve for limiting maximum negative pressure while achieving clinical therapeutic outcomes to minimize side effects induced by excessive negative pressure of air extraction cupping devices. Methods : To determine the clinical necessity and suitability of the cupping pressure control valve, this study was designed to measure the change in pressure with or without the valve using both a manual and an electric suction pump. Results : While the maximum pressure was limited by the pressure control valve, the pressure did not increase above a certain level regardless of the type of manual or electric pump. Conclusions : This study will contribute to the development of a safer and more effective base technology for cupping treatment in oriental medicine.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.1
• /
• pp.32-36
• /
• 2010

Superconducting current leads are indispensible for reducing power loss when subjecting current into superconducting magnets. HTS(High-Tc superconducting) current leads are divided into two types; one is bulk type and the other is tape type. In this paper, conceptual design on the HTS current leads which adopts tape type for nuclear fusion magnets is carried out using magnetic field analysis and thermal analysis. When large current flows through superconducting current leads, strong self magnetic field is generated and applied to the superconducting tapes. This phenomenon leads to the critical current decrease of the superconducting tape. Therefore, we analyzed magnetic field distribution of current leads and found the proper arrangement with respect to the various HTS tapes. In addition to the magnetic field analysis, heat leak through the current leads was also calculated to know which HTS tape is superior than others in thermal aspect. Magnetical field analysis and calculation of heat leak are performed to design 2 kA class HTS current leads.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.1
• /
• pp.37-41
• /
• 2010

To limit fault current in a power system, superconducting fault current limiters (SFCLs) using high temperature superconducting (HTS) coils have been developed by many research groups so far. Non-inductive winding of HTS coils used for SFCLs can be classified into solenoid winding and pancake winding. Each of winding is expected to have different quench and recovery characteristics because the structure of solenoid winding differs from pancake winding's. Therefore it is important to the SFCLs application to investigate characteristics of each winding. In this paper, we deal with quench and recovery characteristics of four kinds of winding : solenoid winding, pancake winding without spacers, and with spacers of 2 and 4 mm thickness. In order to obtain quench and recovery parameters of coils, short circuit tests were performed in liquid nitrogen.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.726-729
• /
• 2011

스마트폰의 보급으로 인해 이를 이용한 전자금융거래가 빠르게 확산되고 있다. 대부분의 금융회사가 스마트폰을 이용한 전자금융거래 서비스를 시행하고 있으며, 장소와 시간의 제약이 없는 스마트폰의 특성으로 인해 이용자 수는 계속 증가하고 있다. 그러나, 현재의 스마트폰은 전자금융거래에서 가장 중요하게 처리해야 할 인증 단계에서 보안 취약점을 보유하고 있으며, 이에 대한 보안 대책 기술이 강력하게 마련되지 못하고 있는 실정이다. 따라서 본 연구에서는 기존 연구가 가지고 있는 인증 방식의 취약점을 보안하기 위해 2팩터 인증기술과 인증 이미지 사진의 GPS정보를 활용하여 본인 인증 절차를 강화시키고, 전자금융거래에서 부인방지 기능을 제공한다. 또한, 단계별 시나리오 및 설계 방안을 제시하고 이를 바탕으로 보안 모듈을 설계 및 구현하여 연구의 효율성 및 타당성을 증명해 보이고자 한다.

• The Journal of the Society of Stroke on Korean Medicine
• /
• v.17 no.1
• /
• pp.45-54
• /
• 2016

A case of a 75-year-old Korean female with gait disturbance due to Normal pressure hydrocephalus (NPH) is presented. She was treated with acupuncture, electroacupuncture and herbal medicine - 柴苓湯(Shirhyung-Tang, Chai-ling-tang, Sairei-to) We used iNPH grading scale, and specified further the grade of gait disturbance category. After Korean medical treatment, there was notable improvement in gait disturbance on our specified scale. Cognitive impairment, tremor and rigidity were improved on each scale alongside. Korean medical treatment may be effective in treating NPH patients.

• The Journal of the Society of Stroke on Korean Medicine
• /
• v.17 no.1
• /
• pp.39-44
• /
• 2016

■ Objectives A case of a 44 years old Korean female with left side headache due to Transformed migraine is presented. ■ Methods He was treated with electroacupuncture around eyes and dry cupping on shoulder, moxibustion, acupuncture and herbal medicine, Chai Ling Tang. Then we evaluated the improvement by Pain area comparison and Numerical Rating Scale(NRS). ■ Results Headache was improved after the administration of Korean medical treatments. ■ Conclusion Korean medical treatment may be effective in treating headache due to Transformed migraine.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.45-46
• /
• 2021

본 논문에서는 제조산업의 제품 품질검사의 자동화를 위한 딥러닝 기법을 제안하고 모델의 성능 최적화를 위한 특징 추출 필터의 크기를 비교한다. 이미지 특징을 자동 추출할 수 있는 CNN을 사용하여 전문인력 없이 제품의 표면 결함을 검출하고 제품의 적합성을 판단할 수 있는 이미지 처리 알고리즘을 구축하고 산업 현장에 적용하기 위한 검증 지표로 검출 정확도와 연산속도를 측정하여 결함 검출 알고리즘의 성능을 확인한다. 또한 연산량에 따른 성능 비교를 위해 필터의 크기에 따른 CNN의 성능을 비교하여 결함 검출 알고리즘의 성능을 최적화한다. 본 논문에서는 커널의 크기를 다르게 적용했을 때 빠른 연산으로 높은 정확도의 검출 결과를 얻었다.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.37 no.2
• /
• pp.120-134
• /
• 2024

Objectives: This research aimed at investigating the trends of acupuncture treatment for Recurrent Implantation Failure (RIF) patients in IVF. Methods: Studies were searched from PubMed, Cochrane Library, EMBASE, CNKI up to April 2024. Terms as 'Implantation failure', 'Recurrent implantation failure', 'Repeated implantation failure', 'RIF' and 'Acupuncture', 'Electroacupuncture', 'Needling' were used. Results: Of 136 screened, 10 studies are selected and analyzed. Studies were conducted using manual acupuncture and electroacupuncture. The results showed that acupuncture (electroacupuncture) treatment for RIF patients is effective in improving clinical pregnancy rate, endometrial blood flow, uterus morphology, endometrium thickness. The most frequently used acupoints were 三陰交 (SP6) and 子宮 (EX-CA1). Conclusions: Included studies showed that acupuncture (electroacupuncture) might have effect on RIF. Further research and meta-analysis should be conducted to verify its therapeutic mechanisms and safety.

• Korean Journal of Materials Research
• /
• v.34 no.4
• /
• pp.208-214
• /
• 2024

To fabricate intermetallic nanoparticles with high oxygen reduction reaction activity, a high-temperature heat treatment of 700 to 1,000 ℃ is required. This heat treatment provides energy sufficient to induce an atomic rearrangement inside the alloy nanoparticles, increasing the mobility of particles, making them structurally unstable and causing a sintering phenomenon where they agglomerate together naturally. These problems cannot be avoided using a typical heat treatment process that only controls the gas atmosphere and temperature. In this study, as a strategy to overcome the limitations of the existing heat treatment process for the fabrication of intermetallic nanoparticles, we propose an interesting approach, to design a catalyst material structure for heat treatment rather than the process itself. In particular, we introduce a technology that first creates an intermetallic compound structure through a primary high-temperature heat treatment using random alloy particles coated with a carbon shell, and then establishes catalytic active sites by etching the carbon shell using a secondary heat treatment process. By using a carbon shell as a template, nanoparticles with an intermetallic structure can be kept very small while effectively controlling the catalytically active area, thereby creating an optimal alloy catalyst structure for fuel cells.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.2
• /
• pp.119-128
• /
• 2013

Korean entrepreneurship education has been focused on the subject selection and curriculum based research according to the stage of entrepreneurship process. But problem is happen in the theory based lecture and unrealistic content of entrepreneurship education. Recent studies in technology entrepreneurship recommend integrated approaches to educating students to operate in this space integrated programs span disciplinary lines, but more important, they combine coursework on fundamental concepts and processes with real team-based projects on technology commercialization. At the core of TI:GER(R) is a three-course academic track that provides instruction in technology commercialization processes with a focus on intellectual property/technology law and business fundamentals. Technology, management, and law are the key success content of entrepreneurship education and we need the approach the integration of these factors.