• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.116-116
• /
• 2012

국내 섬유산업의 경쟁력을 향상시키고 채산성을 확보하기 위해 고부가가치 섬유 제품의 개발이 요구된다. 심미성을 발현하는 대표적인 후가공 기술인 카렌더 가공은 국내뿐만 아니라 국외 후진국에서도 보편화된 기술로 대량 생산으로 인한 가공비 저하, 물량 확보 등에 많은 어려움을 격고 있어 고부가가치의 신기술을 요구한다. 최근 이태리, 일본 등의 선진국에서 후가공 기술인 EMBO 롤러를 이용한 무아레 가공 원단이 고가로 거래되고 있다. 무아레(Moire)는 프랑스어로 "물결 모양의 무늬"라는 뜻으로 직물에 파형(波形)또는 나뭇결 무늬를 나타나게 하는 가공 기술로, 국내에서도 EMBO 롤러를 이용하여 무아레 가공을 하거나 두 겹의 원단을 이용한 무아레 가공이 시도되고 있으나, 전자의 경우 사용되는 롤러가 일반 롤러에 비해 훨씬 고가이고 한 종류의 롤러로 제한된 패턴 밖에 표현할 수 없고 적용 소재가 한정되는 등 많은 단점을 지니고 있고, 후자의 경우 세탁내구성이 나빠 상품화조차 되지 못하고 있어 현재 국내 섬유가공 기술로는 고내구성을 가지고 다양한 효과를 발현하는 무아레 가공이 불가능한 실정이다. 직물의 경 위사 밀도차이를 이용하여 무아레를 형성할 수 있다는 점에 착안하여, 경 위사 조직을 갖는 이형(離型)원단에 PU 수지를 코팅하여 격자무늬(grid) 필름을 제조하고 제조된 Grid 필름과 Base원단을 라미네이팅하여 경 위사 밀도차에 의해 무아레 무늬를 형성할 수 있었다. 이형원단과 Base원단의 경 위사의 밀도에 따라 다양한 패턴의 3차원 무아레 무늬를 발현시킬 수 있으며 합성섬유 및 천염섬유 등의 원단 소재에 제약 없이 영구 내구성의 무아레 제품을 생산할 수 있을 것으로 판단된다. 본 연구에서는 Grid 필름을 이용한 무아레 가공을 위하여 이형원단 제조 조건을 확립하였고, grid 필름 캐스팅 조건, 라미네이팅 조건을 달리하여 이형성 및 무아레 형상을 비교하여 고찰함으로써 제품화에 필요한 요소 기술의 기초를 마련하고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.199-206
• /
• 2017

This paper analyzed structural behaviors of the staggered truss system, typically used in low seismicity regions, resisting the lateral loads such as wind and seismic load. A comparative study of cost and efficiency was carried out by analysing and designing the 10- and 20-story buildings with various types of truss, including pratt, howe, warren, K-, and vierendeel, which may typically be used in staggered truss system. In design, column and truss members are selected in group, and the efficiency of the member design was judged by average demand capacity ratio of the all members in same group. And economic analysis of the system was investigated by the quantity of the structural members. As a result, staggered truss system with the pratt truss and warren truss showed the most economical and efficient performance for 10-story building, and 20-story building, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.757-760
• /
• 2008

The latex modified concrete was applied to baseplate of road bridge after 2000 year. This is in the limelight of stability to be missing problems. But, The baseplate of railroad bridge being experience to difficulty that searching method substituted for bridge waterproofing. In this study, I would like to application on P.C.L layer of railroad bridge using the property and merit of L.M.C. As a result performance test about six item, L.M.C was confirmed no problem to performance and application of bridge waterproofing.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.543-547
• /
• 2004

Visualization of construction process simulation and physical modeling were considered to overcome the limitations of current graphical simulation. The output of discrete-event simulation programs which are the most common mathematical statistical simulation tool for construction processes were analyzed for the visualization of earthmoving process that dealing with objects without fixed. Object-oriented models for equipment, material and work environments were devised to effectively visualize the numerical simulation results of the working time, the queuing time as well as the amount resources etc. The oscillation of the crane's cable and the lifted material that should be considered to rationally modeled and simulated by construction graphical simulation. The derived equation of motion was solved by numerical analysis procedure. Then obtained results was used for physical modeling.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.2
• /
• pp.153-164
• /
• 2014

Currently, there are many programs which are now being developed or already developed to predict radionuclide and corrosion product at the stage of designing NPP. However, since there are not many developments in evaluating quantity of activation corrosion products occurring when disassembling a nuclear power plant there exist some difficulties in calculating accurately. In order to evaluate activation products inventory for the research of effect of neutron activation in the reactor vessel, component of nuclear reactor and adjacent structures, it should be evaluated by using operation history of nuclear reactor, material composition of structure and average neutron flux in every field representing fixed structure of nuclear reactor. In this study, CORA, PACTOLE, CRUDSIM, CREAT and ACE codes are analyzed to predict the quantity of radionuclide and corrosion product of primary reactor which is used at the stage of designing. As a future study, the accuracy in calculating the quantity of product corrosion can be increase by finding out the possibility of use and improvement for evaluation of the decontamination.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.111-119
• /
• 2010

Many researchers have studied on the optimal seismic design with the development of the computer. So far the application structure of most researches on the optimal seismic design was almost the moment resisting frame. Because the braced frames are the representative lateral load resisting system with the moment resisting frames, it is estimated that the effect on the practice will be great if it can is provided a design guideline through the development of optimal seismic design model for the braced frames. The purpose of this study is to propose the optimal seismic design model for the inverted V-type special concentrically braced frames considering the buckling of braces. The objective functions of this are to minimize the structural weight and maximize the total dissipated energy of the structure and the constraints of this are the strength conditions for the column, beam, brace and inter-story drifts condition. To verify the proposed model, it is applied to 2D steel concentrically braced frames of 3-story and 9-story.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.267-275
• /
• 2023

As aged infrastructures have been increased, the importance of accurate maintenance costs and proper budget allocation for infrastructure become prominent under limited resources. This study proposed a mapping algorithm between representative defects, repair methods, and the estimated maintenance costs for concrete bridges. In this regard, using BMS (Bridge Management System) data analysis, bridge repair methods were classified and matched with defects according to their locations, types, and sizes. In addition, the maintenance costs were estimated based on the amount of work-load and quantity per unit using CSPR (Cost Standard Production Rate). As a result, the level of accuracy was an average of 85.1 % compared with the actual bill of quantity for Seoul bridge maintenance. The accuracy of maintenance costs is expected to be enhanced by considering the various site conditions such as pier height, extra charge conditions, additional equipment, etc.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.4
• /
• pp.243-255
• /
• 2014

This study was investigated to estimate the relations between benthic environments and benthic polychaetous community from April 2012 to February 2013. Twenty four stations were selected sequentially with Seomjin River Estuary from the northern part of Gwangyang Bay. The study area could be divided into three characteristic zones based on salinity, water temperature, dissolved oxygen and pH such as Saline Water Zone (SWZ), Brackish Water Zone (BWZ), and Fresh Water Zone (FWZ). Salinity was above 30.0 psu in SWZ, drastically decreased toward inland in BWZ, and nearly zero psu in FWZ. SWZ showed its specific environmental characters like that water temperature fluctuated with little seasonal change and DO showed the lowest values among three zones, and pH maintained as consistent value without seasonal fluctuation. In FWZ, on the other hand, water temperature showed high seasonal fluctuation, DO showed the highest values among three zones, and pH fluctuated greatly. In sedimentary environment, mud, sand and sand/gravel were found as dominant sedimentary deposits in SWZ, BWZ and FWZ, respectively. Organic matter content and AVS in surface sediment were high in SWZ, while Chl-a content high in FWZ. This study area showed a marked environmental difference between FWZ and SWZ as follows: FWZ has coarse sediment and low salinity, low organic matter content, low AVS in FWZ but SWZ has fine sediment and high salinity, high organic matter content and AVS. Species number and mean density of benthic polychaete community was highest in Saline Water Zone (SWZ), drastically decreased in Brackish Water Zone (BWZ), and lowest in Fresh Water Zone (FWZ). Dominant polychates above 5.0% of individual numbers were 6 taxa. Lumbrineris longifolia, Prionospio cirrifera, Tharyx sp. occurred as main dominant species of all study periods, and Hediste sp., Praxillella affinis, Tylorrhynchus sp. dominantly occurred at some seasons. Inhabiting areas of dominant species were separated characteristically. Representative species in SWZ were Lumbrineris longifolia, Tharyx sp., Mediomastus sp.. Wide-appearing species between SWZ and BWZ were Prionospio cirrifera, Heteromastus filiformis, Aricidea sp.. Characteristic species in FWZ were Tylorrhynchus sp. and Hediste sp.. As the results of cluster analysis and nMDS based on the species composition of polychaetous community, unique station groups were established in SWZ and FWZ. Stations in BWZ were sub-divided into several groups with season. Pearson's correlation analysis and PCA between benthic environments and ecological characteristics of polychaetous community showed that salinity, sediment composition, organic content and dissolved oxygen played a role to determine the temporal and spatial distribution of the ecological characteristics as species number, mean density, abundance of main species, and ecological indices.

• Korean journal of communication and information
• /
• v.77
• /
• pp.36-72
• /
• 2016

Comprehensive Cable TV Channels(CCCs) has been established as a political product around 5 years ago, and it's influence and position on the broadcasting field are keep increasing. CCC's stabilization is based on flooding the market with journalism. The repeating news and current affairs programs are appearing constantly in the afternoon which is CCC's primetime. The current affairs talk shows are a product of CCC's representative program type and it leads unique CCC style journalism. The guests of the current affairs talk show leading the program with critiques(comments) and discussions about political issues. The purpose of this study is to explore how these guests of the current affairs talk shows conceptually positioned as political mediating elites and same time to explore the television political landscape through the representative current affairs talk shows from TV chosun, Channel A, MBN, JTBC which are present by these political elites. This study wants to find out about that television political effects from CCCs which exemplified into certain directions by these political mediating elites saying their political biases and expresses their feelings drastically that causes high ratings and brings people's attention. The guests who called political mediating elites in this study are mostly considered to be extreme rightist, conservatives, conservative-centrist and they have close relationship with certain political party or political group. The political mediating elites gain the popularities and have great influence on the public from performing the television politics through CCCs' current affairs talk shows and use that to make political exchange connections with political groups. Therefore this study wants to point out that CCCs' current affairs talk shows are situated in political rally, exchange connection, so current affairs talk shows are existing only for political battle field.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.307-315
• /
• 2016

Many countries are trying to reduce a greenhouse gas to step up their fight against climate change. There are many studies related to building only for reducing a greenhouse gas in construction area but studies related to reducing a comprehensive environmental load including various pollutants that affects the global environment are lacking. This study aims to analyse the characteristics of environmental load by work type for tunnel projects. Analysis showed that seven work types, including lining concrete, shotcrete, tunnel portal and open-cut tunnel work, etc., are representative works generated environmental load. These seven works represent 89.22 percent of total environmental load. In addition, comparison results of environmental load per tunnel's length by work type showed that a major factor of environmental load is caused by a tunnel portal and open-cut tunnel work with relatively short length (excavation length). And lining concrete and shotcrete work are larger than any other environmental load with tunnel's total length. It is expected that the result of this study will be used to make a estimation model for environmental load using approximate quantity survey of representative work types in the early stage of tunnel design. And it will be play a considerable role in establishing of environment management plan for sustainable infrastructure construction.