• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.171-181
• /
• 2000

Many Studies of tunnel and tunnelling safety have been developed continuously based on the increasing social interests in underground space since 1990's in Korea. Because the growth of population in metropolitan has been accelerated at a faster pace than the development of the cities, underground facilities have been created as a great extent in view of less land space available. In this study, a lot of types of tunnel failure were surveyed and the detail causes were studied after many cases of tunnel failure were collected. There were suggested brief countermeasure of tunnel failure through case study. An expert system was developed to predict the safety of tunnel and choose proper tunnel reinforcement system using fuzzy quantification theory and fuzzy inference rule based on tunnel information database. The comparison result between the predicted reinforcement system level and measured ones was very similar. In-situ data were obtained in three tunnel sites including subway tunnel under Han river. This system will be very helpful to make the most of in-situ data and suggest proper applicability of tunnel reinforcement system developing more resonable tunnel support method from dependance of some experienced experts for the absent of guide.

• Journal of the Korean Professional Engineers Association
• /
• v.27 no.5
• /
• pp.39-45
• /
• 1994

스치로폴은 발포폴리스티렌(EPS : Expanded Poly-Styrene)을 말하며, 이것은 스티렌모노머(Stone Monomer)를 중합하여 만든 플리스티렌과 여기에 첨가한 발포제가 주원료로 되어 있다. 폴리스티렌은 1930년대에 미국과 독일에서 공업화되었고 스치로폴은 1943년 초에 미국에서 공업화가 이루어져 건물의 단열재, 물품포장재 등으로 이용되어 왔다. 1972년에는 노르웨이에서 연약지반상 교량의 접속도로 보수공사에 처음 스치로폴 성토공법이 이용되어 교대의 측방유동 방지대책으로 성공을 거둠에 따라 연약지반상의 경량성 토재 및 토압을 받는 옹벽, 교대 등 구조물의 경량 뒷채움재로서 각광을 받게 되었다. 한편 우리나라에서는 1994. 6월에 한국지반 공학회 주최로 개최된 "발포폴리스티렌(EPS) 이용 성토공법 국제심포지엄"에서 양산-구포간 고속도로성토(L=70m) 및 서해안고속도로의 교대 뒷채움에 스치로폴 경량성토재가 이용된 문헌이 발표된 바 있으며, 시중에서 단열재용으로 판매되고 있는 스티로폴 평판의 규격은 표 1과 같다. 스치로폴은 그 가격이 비싼 편이지만 단위중량(20-40kgf/m$^3$)이 흑의 50/1-100/1 밖에 안되는 초경량재로서 강도, 내구성 및 시공성이 우수한 성토용 신재료이기 때문에 연약지반상에서 구조물 시공시 지반의 과대한 침하, 측방유동 및 사면활동 등이 생길 경우 도로성 토재 또는 교대, 옹벽 등 구조물의 뒷채움재로서 스치로폴을 사용하면 이를 방지할 수 있으므로 매우 효과적인 토목자재라 할 수 있다. 따라서 본고에서는 지금까지의 연구결과, 시험시공 및 시공실적 등을 토대로 발표된 참고문헌을 중심으로 연약지반상 스치로폴 성토공법의 설계방법에 대하여 간단히 소개하고자 한다. 소개하고자 한다.

• Journal of KSNVE
• /
• v.2 no.1
• /
• pp.15-20
• /
• 1992

(1) 화약발파작업을 시작하기 전에는 필히 시험발파, 안전진단을 통해 공해 및 안전사고 발생요소들을 면밀히 분석하고 파악하여 발파공법, 천공공법, 사용폭약 의 종류, 사용약량 등을 결정하고 이에 따른 적합한 안전거리의 설정, 안전덮게, 안전망의 사용, 필요시 휀스철망 설치등의 안전조치를 완벽히 취해야겠다. 또한 현행 소음진동규제법에 의하면 폭약 사용시 7일전 신고의무 규정을 우리나라의 공사 현실을 감안해 볼 재검토 할 필요가 있다. (2) 선진국의 발파진동 기준을 우리나라 의 경우와 비교 분석해 볼때 우리나라의 경우 발파진동 안전기준은 도심지에는 대체 로 0.5cm/sec가 적당하고 고주택, 아파트 등이 밀집된 지역이나 건물지반이 특히 약한 곳은 0.2cm/sec을 적용함이 타당하다고 판단된다. 또한 도심지에서의 안전발파 를 위한 터널공법으로는 주변 생활환경 소음진동방지를 위한 심발법으로 브이 컷법 을, 여굴방지와 미려시공 등 공사시 안전사고, 소음진동을 방지하기 위한 공법으로는 슬러리, 파이 넥스 폭약을 이용한 정밀면 발파법을 권장한다. (3) 연화발사시 안전 거리를 3.deg. 기준 최소반경 129m, 12" 기준 최고 반경 200m로 설정하여야 겠다. 또한 연화발사시 발생하는 폭발 소음은 80 - 100dB 정도로써 대량으로 장시간 발사 시는 청력장해 등의 피해가 발생할 수 있으나 우리나라의 경우는 발사 총 시간이 대체로 30분을 초과하지 않으므로 관람자나 일반인들이 소음피해를 호소할 수준은 아니라고 결론지을 수 있다.수 있다.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.1
• /
• pp.13-23
• /
• 2020

In 2005, Urban railway seismic design was introduced in Rep. Of Korea, and many studies on seismic performance evaluation and reinforcement methods were conducted. In accordance with the Enforcement Decree of the Earthquake Disaster Countermeasures Act issued in March 2009, during April 2010 to October 2013, some of local governments established detailed evaluation and reinforcement measures for seismic performance of the urban railway underground structure. Afterwards, the seismic performance reinforcement of the existing urban railway structures was conducted for the sections that a long period of used until the end of 2018, and the reinforcement works are carried out by various methods using the previously studied methods. However, various reinforcing materials and construction methods using have been studied, but the classification research on the construction methods currently applied to reinforcement construction of urban railways is insufficient. The purpose of study is to analysis the cases currently applied to seismic reinforcement construction and to show the characteristics of each construction method, the reasons for its application and problems.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.285-296
• /
• 1999

Preloading method is used to prevent the settling of a foundation and to increase the strength of ground by consolidation settlement in advance. But, the embankment used in preloading method brings large deformation and sliding failure in the soft ground. Recently, reinforcement method is often used in embankment in order to prevent sliding failure. But, until now, the research on the stability analysis considering both the rate of strength increase of clay by embankment load and increase of resistance force by the geosynthetics in the embankment body is not found. In this study, the stability analysis program(REAP) for embankment including these two points is developed. By this program(REAP), the stability analysis can be done about during the gradual increase of embankment and the stability counterplan can be established when the safety factor is lower than allowable safety factor of design. After calculating the position of sliding failure surface, the force of geosynthetics which is selected by either the effective tensile strength or tensile force caused by the displacement of soil mass in this position is applied to stability analysis. And the increase of resisting moment can be calculated by this force. Also, the construction period can be estimated and the time for the appropriate counterplan can be decided in order to maintain the stability of embankment. And then, safe and economical embankment design can be performed.

• Tunnel and Underground Space
• /
• v.18 no.5
• /
• pp.355-365
• /
• 2008

Displacement caused by tunneling is difficult to predict since it is affected by many factors such as ground condition, excavation method and supplementary method of reinforcement. In this study, horizontal inclinometer was employed to monitor ground settlements above a tunnel face before and after the excavation. Monitoring results were analyzed to predict the preceding displacement and settlement of the surface structures. The result of the analysis can be used to establish a proper counter measure which keeps the serviceability of the surface structures. Based on the analysis of the monitoring result, ground properties of the site were deduced and the influence of the tunnel excavation on the settlement of the foundation above the tunnel is analyzed.

• Proceedings of the KSEG Conference
• /
• 2002.04a
• /
• pp.61-73
• /
• 2002

Daegok dam is Concrete Face Rockfill Dam(C.F.R.D) of which 52m height, 190m length, that construction in beneath 306, Chanjeon-Ri, Dudong-Myeon, Ulju-Gun, Ulsan Metrocity. Left slope excavation of spillway have related to Daegok dam construction are developing crack in Sta. No. 1~2, EL. 134~137m after 67.0mm rainfall from 2000. 7. 23. 13:00 to 7. 24. 04:00. Surface geological survey and slope stability investigation with stereographic projection method in order of slope stability establishment. Partial supplement excavation and SSL. P. C. Anchoring method is able to pre-stressing are think about unstable element after excavation. This slope stability establishment is very successfully completion.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.12
• /
• pp.37-46
• /
• 2011

An application frequency of vertical drainage method is increasing as an effective consolidation acceleration method. PBD method is most frequently used as a consolidation acceleration method in vertical drainage methods. PBD is economical and easy to operate but has some problems those are an environmental pollution and a decrease of a discharge capacity caused by bending of drainage materials when it is used in great depth. SCP method was frequently used because it's discharge capacity was good but now it is rarely used because of an increase of the material price because of an order imbalance. As the way to solve these problems, GCP method has been to the fore. For analyzing the effect of GCP method on the discharge capacity, three types of composite discharge capacity tests are done by using GCP, SCP and PBD respectively with the circle case, ${\phi}38{\times}h70cm$. On the contrary to this, GCP shows the worst discharge capacity for a decrease of the void ratio and the clogging phenomenon caused by increasing load. Also to figure out the clogging range of GCP, the clogging of GCP is checked in each load stage with a large case($1.0m{\times}0.5m{\times}1.1m$) which has clear acrylic front face. The diameter of GCP was 35cm and a clogging phenomenon occurred in 10% approximately. The result shows that the discharge capacity of GCP was given the lowest value for a decrease of the void ratio and the clogging phenomenon causing by increasing load. And the clogging phenomenon mostly occurred within 10% of GCP's diameter range.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.6
• /
• pp.43-50
• /
• 2000

충북단양군 영춘면 휴석동 지역에 위치한 위험사면은 1972년 456mm의 집중강우에 의해 사면붕괴가 발생하여 가옥 2채붕괴 등의 피해를 유발시켰으며, 지속적인 지반침하가 진행되고 있다. 남한강 하류에 접하고 있는 상기의 위험사면은 산사태에 의한 토사의 이동시 남한강을 덮치게 되어 그 유로의 변화를 일으켜 영춘면의 지역의 침수피해의 대규모의 재해를 일으킬 수 있는 위험성이 내재되어 있다. 본 연구는 상기 위험사면에 대한 지반조사, 지하수 특성 조사 등을 통해 붕적토 사면의 안정해석을 수행하여 최적의 조강 대책안을 제시하고 이에 따른 재해 예방을 도모하고자 한다. 보강대책을 붕적토 사면의 거동특성과 위험사면의 지형적 특성 등을 고려하여 집수정, 수평배수공, 앵커공 및 보강토 옹벽의 복합공법에 의해 위험사면의 안정성을 확보하는 방안을 제안하였다.

• The Journal of Engineering Geology
• /
• v.21 no.3
• /
• pp.221-230
• /
• 2011

The movement of rock cut slopes may result in upheaval of an adjacent road. Because most cut slopes consist of rock, road upheaval due to the movement of a cut slope is a rare phenomenon in Korea. We found that the movement of rock slopes which are heavily weathered and with strongly developed weak zones is governed by circular failure of the overall rock formation rather than by failure along discontinuities. The results of a numerical analysis revealed that the application of a ubiquitous joint model in a continuum analysis is appropriate for anisotropic rocks (e.g., schist) and for slopes for which the stability is influenced by a particular discontinuity. The results of a field investigation and numerical analyses suggest that retaining walls and anchors should be used to stabilize rock slopes and that real-time monitoring equipment should be installed to assess the reinforcing effect of the remedial measures.