• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.628-635
• /
• 2014

The large amount of $CO_2$ emitted from mushrooms during incubation and developmental stages can be utilized in plant production systems as a $CO_2$ source. The objectives of this study were to measure the $CO_2$ emission and absorption rates of mushroom and lettuce, respectively, and to analyze the $CO_2$ concentrations at various ratios of mushroom and lettuce in a closed production system. The $CO_2$ emission rate of king oyster mushrooms (Pleurotus eryngii ( DC.) Qu$\acute{e}$l) and $CO_2$ absorption rate of lettuces (Lactuca sativa L. cv. Asia Heuk Romaine) were measured by using two closed acryl chambers ($1.0m{\times}0.8m{\times}0.5m$) in which indoor temperatures were maintained at $18^{\circ}C$ and $22^{\circ}C$, respectively. The lettuce was grown at a light intensity of PPF $340mol{\cdot}m^{-2}{\cdot}s^{-1}$ and with nutrient solution at EC $1.2dS{\cdot}m^{-1}$. The air was periodically circulated between the two chambers using a diaphragm pump. The $CO_2$ emission rate of the mushroom increased until the $15^{th}$ day after scratching (DAS) and then decreased. The rate also increased with increased indoor temperature. In particular, the $CO_2$ emission rate per fresh weight of fruit body increased by about 3.1 times after thinning compared to before thinning. In terms of $CO_2$ balance, the $CO_2$ emission rates from a bottle (950 mL) of the mushroom at 9, 12, and 14 DAS were equivalent to those of 3, 4.5, and 5.5 lettuce plants at 7, 10, and 12 DAT (days after transplanting), respectively. This work shows that balance in $CO_2$ concentration could be achieved using an appropriate ratio of the two crops in a closed production system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.239-252
• /
• 1981

The East China Sea is an important region as nursery and spawning grounds for pelagic fishes such as jack mackerel, common mackerel etc. , and thus constitutes a major fishing area for purse-seine fishery. The environment surrounding in this region is under the influence of the Yellow Sea Cold Water, China Coastal Water and Kuroshio Current. The purpose of this study was to clarify the effects of oceanographic conditions and thermal fronts on the formation of the fishing grounds for the mackerels in the East China Sea. Through the analyses of fisheries statistics during 1968-1976 and temperature data, the following facts are found: 1) Approximately $70\%$ of the total mackerel(common) catches appeared to be come from the Tsushima Current region which includes Sakai coast of the Japan Sea, eastern Tsushima and Shirase Island, and Jeju Island of Korea. This area covers only about $8\%$ of the East China Sea. 2) Main fishing grounds for the jack mackerel are also centered around the area of southwestern Goto, Shirase and eastern Tsushima Island where the catches accounted for about $54\%$ of the total jack mackerel catches. 3) Fluctuations in annual catches are relatively small in the Tsushima Current region, compared to other regions such as Yellow Sea, southwestern coast of Kyushu and mid-western part of the East China Sea, where the fisheries yields varied considerably due to unstable fishing conditions. 4) It appears that the fishing grounds for the jack mackerel are mainly distributed along the warmer region ($15-20^{\circ}C$) of the thermal front, and those for the common mackerel are in somewhat colder region ($13-16^{\circ}C$) in the Tsushima Current.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.6
• /
• pp.597-611
• /
• 2003

Background : Loss of the short arm of chromosome 16 is a frequent event in various cancers, which suggests the presence of tumor suppressor gene(s) there. To map precise tumor suppressor loci on the chromosome arm for further positional cloning efforts, we tested 23 primary small cell lung cancers. Method : The DNAs extracted from paraffin embedded tissue blocks with primary tumor and corresponding control tissue were investigated. Twenty polymorphic microsatellite markers located in the short arm of chromosome 16 were used in the microsatellite analysis. Results : We found that six (26.1%) of 23 tumors exhibited LOH in at least one of tested microsatellite markers. Two (8.7%) of 6 tumors exhibiting LOH lost a larger area in chromosome 16p. LOH was observed in five common deleted regions at 16p. Among those areas, LOH between D16S668 and D16S749 was most frequent (21.1%). LOH was also observed at four other regions, between D16S3024 and D16S748, D16S405, D16S420, and D16S753. Six of 23 tumors exhibited shifted bands in at least one of the tested microsatellite markers. Shifted bands occurred in 3.3% (15 of 460) of the loci tested. Conclusion : Our data demonstrated that at least five tumor suppressor loci might exist in the short arm of chromosome 16 and that they may play an important role in small cell lung cancer tumorigenesis.

• Journal of the Korean association of regional geographers
• /
• v.5 no.2
• /
• pp.1-14
• /
• 1999

In the course of modernization and globalization, each region in Korea has experienced deep subordination to the center of Seoul and the increase of colonization possibility by world capital. In order to overcome the current situation, above all, the strategies should be developed focusing on daily life and life space. The basis for the development of strategies is the establishment of regional identity on life space. It is because of the reason that life space, or small-scale region has drawn wide attention in the research of geography in recent years. Especially, humanistic geography and new regional geography have developed the concerning theory and methodology, and kept going on the research of small-scale regions. Generally speaking, there have been quite large amount of theoretical discussions on small-scale region in recent years in the field of geography. Empirical researches focusing on a particular small-scale region, however, have been rarely made. It seems related to the deficiency of data materials and the obscurity of research framework of small-scale regional geography. A community paper must be very helpful for the geographic research on small-scale region. As community paper is published based on county('gun'), small or mid-size city('si'), or district of large city('gu'), it deals with small news and daily life information closely attached to the region. Accordingly, it functions as a medium of the formation of regional identity. It is also a valuable source material for the validation of regional identity and for the analysis of identity-shaping mechanism. The geographic interests in community paper, first of all, should be taken shape by the work on the geographical distribution and the periodic change of publication situation of community papers in Korea. Another research subject on community paper is the examination of characteristics of the region by analyzing the news and the advertisements. The news in community paper must be a valuable data source of regional studies in geography. Also, the regional identification process of community people through the community paper could be and should be explored, and how the regional centrality, or self-generation based on the identity is achieved will be an important subject.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.222-231
• /
• 2009

Statements of the problem: Over the past decades, conventional complete dentures were used for various patients although they have incomplete function. Overdentures using dental implants could help the improvement of denture function. Purpose: The purpose of this study was to compare the strains of abutment and bone on implant overdenture between splinted and unsplinted type of prosthesis. Additionally, the strain values of parallel placed implant model and unparallel placed implant model were compared. Material and methods: Two acrylic resin model were prepared and two implants were placed at the canine positions in each model. In the first model, two implant were placed parallel. In the second model, two implants were placed with 10 degree labiolingual divergence. Two types of abutment were connected to the fixtures alternatively. One was splint type of Hader bar, the other was unsplint type of ball abutment. Overdentures were fabricated with corresponding attachment systems and seated on abutments. Strains of abutments and labial bone simulants were measured with electric resistance strain gauges when static load from 100 N to 200 N were applied to overdentures. Results: 1. Splinted type of overdentures using bar and clip showed higher absolute strain values. But the strain was compressive and the load was shared by two implants(P<.05). 2. Unsplinted type overdentures using ball and O-ring showed low absolute strain values(P<.05). 3. Labially inclined implant showed higher tensile strain values in unsplinted type of prosthesis than in splinted type of prosthesis. Lingually inclined implant showed rather low strain values under load(P<.05). 4. Non parallel implant model showed higher absolute strain values than parallel placed implant model comprehensively(P<.05).

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.183-192
• /
• 2004

Even in Korea the number of steel structure buildings that allow internal space and easy change of their layouts in accordance with the purpose of buildings and box-type steel bridges constructed with thick plates with thickness in a rage just from a few $\beta$AE to \$100\beta$AE is increasing these days and therefore, domestic fabrication and processing technology of members for steel structures is being improved at a pace faster than in the past to meet the growing requirements of consumers for high reliability on quality control on the related steel structures. However, most domestic fabricators os steel structures who are turning out their steel products in accordance with the designs prepared by engineering companies in their respective works for the sake of cost cut more than anything else, hesitating to introduce any advanced new technology into themselves. In the case of the steel structure design application for small and mid-size buildings in particular, it is quite meaningful not only for those who are involved in steel structure business, but also for the people working at construction work fields to review the result of the study on the connections of steel structure members deigned to obtain superb quality of steel structures within short period for steel fabrication and erection at fields in economical ways, as there is a glowing tendency seeking standardization of connection of steel structure members as well as whole structure together with the development on design of construction system of buildings including their exterior and interior decoration materials, manufacture of the related members and fabrication technique structure. This paper has been prepared with the aim to review the peculiar characteristics of buildings constructed with the main frames of steel structures and actual cases of the change made ing the connections between steel structure columns and between columns and girder members in order to reduce the work period necessary for fabrication and erection of steel structures at the maximum as well as the some examples of steel structures fabricated through automatic welding by robots for box-type columns in addition to the description of the problems found in the course of fabricating those steel structures, suggesting possible counter-measures to solve them.

• Journal of Climate Change Research
• /
• v.2 no.4
• /
• pp.297-307
• /
• 2011

This study investigates relation of food safety incidents with climate. Therefore food safety incidents and climate data during 1999 to 2009 have been analyzed. In situ observations of monthly mean temperature, maximum temperature, minimum temperature, precipitation, and relative humidity in 60 observation stations of Korean Meteorological Administration (KMA) have been used in this study. Food safety incidents data have been constructed by searching media reports following Park's method (2009) during the same period. According to the Park's method, 729 events were collected. To analyze its relations, food safety incidents data have been classified into chemical, biological, and physical hazards. Pearson product-moment correlation coefficients have been applied to analyze the relations. The correlation of food safety incidents has negative one with precipitation (-0.48), and positive one with minimum temperature(0.45). Precipitation has been correlated with biological and physical hazards more than chemical hazard. Temperatures (mean temperature, maximum temperature, and minimum temperature) have been correlated closely with chemical hazard than others. Food safety incidents data has been interblended with human behavior factor through decision-making processes in food manufacturing, processing, and consumption phases of "farm-totable" food processing. Act in the preventing damage will be obvious if the hazard were apparent. Therefore abnormal condition could be more dangerous than that of apparent extreme events because apparent events or extreme events become one of alarm over hazards. Therefore, human behavior should be considered as one of the important factors for analysis of food safety incidents. The result of this study can be used as a better case study for food safety researches related to climate change.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.1-8
• /
• 2019

Pintail (Anas acuta) is the major wintering bird in South Korea and known as a major mediator of the highly pathogenic avian influenza (HPAI). Pintail migrates long distances between Russian Siberia and Korea. This species prefers a rice paddy area as their winter habitat. The purpose of this study is to provide the data necessary for the conservation and management of bird habitats in Korea by understanding the wintering home-range and habitat of pintail in Korea. We captured six pintails using a cannon-net in the winter of 2015 and attached the GPS-mobile phone based telemetry (WT-300) on them to study the wintering home-range and wintering habitat. We analyzed the tracking location data using ArcGIS 9.0 Animal Movement Extension and calculated Kernel Density Estimation (KDE) and Minimum Convex Polygon (MCP). The average home-range in the wintering ground analyzed by MCP was $677.3km^2$ (SD=130.2, n=6) while the maximum and minimum were $847.7km^2$ and $467.5km^2$, respectively. Extents of home-range analyzed by KDE were $194.7km^2$ (KDE 90%), $77.4km^2$ (KDE 70%), and $35.3km^2$ (KDE 50%). The pintails mostly used both sea and paddy field as habitat in the winter season and utilized paddy fields more during the nighttime and than the daytime. We concluded that the home-range and habitat of pintails in the winter could be used as the reference data for the preservation of species, management of habitats, and coping with a breakout of HPAI.

• Journal of agricultural medicine and community health
• /
• v.43 no.4
• /
• pp.258-269
• /
• 2018

Objectives: There was an outbreak of foodborne and waterborne disease among high school students at Okcheon in June, 2018. First attack occurred June $5^{th}$ but seven days later it was notified. The purpose of this investigation was to evaluate the pathogen of outbreak and cause of delayed notification. Methods: First, we did a questionnaire survey for 61 cases and 122 controls to find what symptoms they had and whether they ate foods or drank water from June $2^{nd}$ to June $12^{th}$. Second, we investigated the environment of cafeteria and drinking water. Third, we examined specimen of cases and environment to identify bacteria or virus. Results: Attack rate of this outbreak was 7.8%. Drinking water was strongly suspected as a source of infection in questionnaire survey but we could not find the exact time of exposure. Norovirus was identified in specimen of cases (2 students), drinking water (at main building and dormitory) and cafeteria (knife, dishtowel, hand of chef) Conclusions: We decided norovirus as the pathogen of this outbreak based on the clinical features of cases with diarrhea vomiting, abdominal pain and recovery within 2 or 3 days after onset, outbreak due to drinking water and microbiologic examination, And the cause of delayed notification might be the non-existence of the nurse teacher at that time and the lack of understanding of teachers on immediate notification under the outbreak. To prevent the delayed notification, notification system about outbreak of foodborne and waterborne disease in school is needed to be improved.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.