• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.236-247
• /
• 2002

We propose a cell－multiplexing scheme for the real－time communication service in ATM network and a new service discipline guarantee end-to-end delay based on pseudo-isochronous cell switching. The proposed scheme consists of two level frame hierarchy, upper and lower frame, which is used to assign the bandwidth and to guarantee the requested delay bound, respectively. Since the Proposed algorithm employs two level frame hierarchy, it can overcome the coupling problem which is inherent to the framing strategy It can be comparatively reduce the complexity, and still guarantee the diverse delay bounds of end-to-end. Besides, it consists of two components, traffic controller and scheduller, as the imput traffic description model and regulates the input traffic specification. The function of the traffic controller is to shape real -time traffic to have the same input pattern at every switch along the path. The end-to-end delay is bounded by the scheduller which can limit the delay variation without using per-session jitter controllers, and therefore it can decrease the required buffer size. The proposed algorithm can support the QoS's of non-real time traffic as well as those of real time traffic.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.925-933
• /
• 2003

Network is expected to be developed into optical Internet network collected IP layer and optical layer, but GMPLS is risen at the transitional evolution stage because of the present technology level. GMPLS that MPLS is extended and generalized is able to support not only the packet switching device but also the devices which perform switching in time, wavelength, and space domain. To implement the common control plane to these various switching types, GMPLS extends the existing MPLS signaling and routing protocol. In this paper, we describe the overview of GMPLS technology, and then we will refer to the OSPF(Open Shortest Path First), which was used to exchange the status information of link, as the plan of routing extension to exchange the information of various link type, bandwidth, link protection type etc. And also, we describe the definition of new protocol, so called, LMP that is a signaling protocol for solving complex problem which manages hundreds and thousands of links between two nodes. And we will examine and analyze the plan of signaling protocol extension to apply signaling protocol RSVP-TE(Resource Reservation Protocol) for traffic engineering in MPLS to network, and the message objects and formats associated with modified RSVP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.41-46
• /
• 2019

In this paper, it is necessary to study the bandwidth and network system for efficient image transmission in the current era of drone imaging, and to design routing protocols to round out and cluster two or more multi-drones. First, we want to construct an ad hoc network to control the multidrone. Several studies are underway for the clustering of drones. The aircraft ad hoc network (FANET) is an important foundation for this research. A number of routing protocols have been proposed to design a FANET, and these routing protocols show different performances in various situations and environments. The routing protocol used to design the FANET is tested using the routing protocol used in the existing mobile ad hoc network (MANET). Therefore, we will use MANET to simulate the routing protocol to be used in the FANET, helping to select the optimal routing protocol for future FANET design. Finally, this paper describes the routing protocols that are mainly used in MANET and suitable for FANET, and the performance comparison of routing protocols, which are mainly used in FANET design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8C
• /
• pp.758-770
• /
• 2002

In this paper, we propose a novel resource allocation scheme which can maximize capacity for QoS guarantee of Assured Service in Differentiated Services. Performance of the proposed resource allocation scheme is analyzed with each buffer management scheme such as RIO and Adaptive RIO. To prevent an early random drop of the admitted In-profile packet, Adaptive RIO scheme updates parameters of RIO scheme every time interval according to the estimated numbers of maximum packet arrivals of In-profile traffic and Out-of-profile traffic during the next time interval. The numbers of maximum packet arrivals during the next time interval are estimated based on the buffer size determined by the network topology and the ratio of bandwidth allocated to each subclass. We can find from simulation results that proposed resource allocation scheme with Adaptive RIO can guarantee QoS and can maximize capacity for Assured Service.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2191-2204
• /
• 1997

An efficient packet transmit scheduling algorithm should be able to allocate the resource to each connection fairly based on the bandwidth and quality of service requirements negotiated during the call admission procedure and it should be able to isolate the effects of users that are behaving badly. In this paper, we propose an effective round-robin packet transmit scheduling mechanism, which we call the delay tolerant packet reserving scheme (DTPRS) based on delay QoS requirments. The proposed scheme can not only provide fairness and but also reduce delay, delay variation, and packet loss rate by reserving output link time slots of delay tolerant packets and assigning the reserved slotsto delay urgent packets. Our scheme is applicable to high speed networks including ATM network because it only requires O(1) work to process a packet, and is simple enough to implement.

• Information and Communications Magazine
• /
• v.15 no.7
• /
• pp.75-94
• /
• 1998

In this paper, HFC CATV networks are introduced. HFC CATV networks are currently considered as a most effective and plausible solution for subscriber access networks in the information superhighway, among others such as ADSL and B-WLL. The advantages of HFC CATV networks include its broad upstream and downstream channel bandwidths, much wider than PSTN's and its readiness. The HFC CATV networks are already well spread among the general subscribers in Korea. This fact will shorten the installation period and significantly reduce its cost. In addition, The structure and channel environment of the HFC CATV networks are introduced. At the same time, in this paper included are major problems in the HFC CATV networks and the solutions for these problems. Also discussed are data transmission, medium access control, IEEE802.14, and MCNS for standardizations. Moreover, additional telecommunications service activities in both Korea and other countries, using HFC CATV networks are also included. The topics which are covered in detail are the ones such as interoperation between HFC CATV networks and trunk line and the digital transmission performance test for the CATV networks. In the performance test, it is concluded that HFC CATV networks can satisfy the QoS for various additional services if the number of the subscribers in a cell is limited to less than 500 and other minor requirements are satisfied. Based on all these discussions and conclusions, HFC CATV networks are suggested in this paper for the subscriber access networks of the so called information superhighway.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2A
• /
• pp.83-94
• /
• 2012

Various wireless communication devices or network such as WRAN and WLAN will coexist in the TVWS(TV White Space). Because of this coexistence, the wireless devices which use the TVWS have to avoid interfering to not only licensed TV receiver and wireless microphone but also homogeneous or heterogeneous TVBD(TV Band Device)s. In this paper, we propose two frequency sharing methods for the coexistence of WLAN and WRAN in terms of interference reduction and throughput enhancement in both homogeneous and heterogeneous networks. One is the WRAN spectrum etiquette to provide more wide bandwidth for WLAN users and the other is the WLAN frequency selection methods to improve the throughput performance. The simulation results have confirmed the throughput improvement of the proposed methods. Moreover, the proposed methods is also applicable to improve the throughput performance and reduce interference of similar systems working in a cognitive manner.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1173-1181
• /
• 2007

A number of routing algorithms have been studied for wireless mobile ad-hoc network. Among them, the AODV routing algorithm with on-demand method periodically transmits hello message and monitors link state during data transmission in order to maintain routing paths. When a path is disconnected, a node that senses it transmits a RERR packet to the transmitting node or transmits a RREQ locally so that the path could be repaired. With that, the control packet such as a RREQ is broadcast, which causes the consumption of bandwidth and incurs data latency. This paper proposes a LRRLBP algorithm that locally repairs a path by predicting link state before disconnecting the path based on the AODV routing protocol for solving such problems. Intensive simulations with the results using NS-2 simulator are shown for verifying the proposed protocol.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.37-44
• /
• 2009

A novel phase-locked loop(PLL) architecture with resistance and capacitance scaling scheme has been proposed. The proposed PLL has three charge pumps. The effective capacitance and resistance of the loop filter can be scaled up/down according to the locking status by controlling the direction and magnitude of each charge pump current. This architecture makes it possible to have a narrow bandwidth and low resistance in the loop filter, which improves phase noise and reference spur characteristics. It has been fabricated with a 3.3V $0.35{\mu}m$ CMOS process. The measured locking time is $25{\mu}s$ with the measured phase noise of -105.37 dBc/Hz @1MHz and the reference spur of -50dBc at 851.2MHz output frequency

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.186-195
• /
• 1999

In this paper, the RF-modules composed of front-end, frequency synthesizer, modulator/demodulator and power control multi channel WLL personal system for W-CDMA using 10 [MHz] RF channel bandwidth has been implemented and considered. The measured transmission power is 250 [mW] which is very close to the required value. The measured flatness of power at the final output stage is ${\pm}1.5[dB]$ over the required bandwidth of the receiver. In addition, it is found that the chip rate transmitting spread signal is set to 8.192 [MHz], the required rate. The frequencies of RF_LO signal and LO signal of the modulator and the demodulator measured by a frequency synthesizer are satisfied with design requirements. The operating range of the receiving strength signal indicator and AGC units shows 60 [dB] respectively. Also the measured phasor diagram and eye pattern for deciding the RF modules compatible with baseband digital signal processing part are shown good results.