• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.1-7
• /
• 2018

In a microcolumn, a miniaturized electrostatic deflector is often adopted to scan an electron beam. Usually, a double octupole deflector is used because it can avoid excessive spherical aberrations by controlling the electron beam path close to the optical axis of the objective lens and has a wide scan field. Studies on microcolumns have been performed to improve the low throughput of an electron column through multiple column applications. On the other hand, as the number of microcolumns increases, the number of wires connected to the components of the microcolumn increases. This will result in practical problems during the process of connecting the wires to electronic controllers outside of the vacuum chamber. To reduce this problem, modified quadrupole and octupole deflectors were examined through simulation analysis by selecting an ultraminiaturized microcolumn with the Einzel lens eliminated. The modified deflectors were designed changing the size of each electrode of the conventional Si octupole deflector. The variations of the scan field and electric field strength were studied by changing the size of active electrodes to which the deflection voltage was to be applied. The scan field increased linearly with increasing deflection voltage. The scan field of the quadrupole deflector and the electric field strength at the center were calculated to be approximately 1.3 ~ 2.0 times larger than those of the octupole deflector depending on the electrode size.

• Korean Journal of Optics and Photonics
• /
• v.35 no.1
• /
• pp.9-17
• /
• 2024

A plenoptic optical system for microscopy comprises an objective lens, tube lens, microlens array (MLA), and an image sensor. Numerical aperture (NA) matching between the tube lens and MLA is used for optimal performance. This paper extends performance predictions from NA matching to unmatching cases and introduces a computational technique for plenoptic configurations using optical analysis software. Validation by fabricating and experimenting with two sample systems at 10× and 20× magnifications resulted in predicted spatial resolutions of 12.5 ㎛ and 6.2 ㎛ and depth of field (DOF) values of 530 ㎛ and 88 ㎛, respectively. The simulation showed resolutions of 11.5 ㎛ and 5.8 ㎛, with DOF values of 510 ㎛ and 70 ㎛, while experiments confirmed predictions with resolutions of 11.1 ㎛ and 5.8 ㎛ and DOF values of 470 ㎛ and 70 ㎛. Both formula-based prediction and simulations yielded similar results to experiments that were suitable for system design. However, regarding DOF values, simulations were closer to experimental values in accuracy, recommending reliance on simulation-based predictions before fabrication.

• New & Renewable Energy
• /
• v.7 no.4
• /
• pp.30-36
• /
• 2011

The objective of this study is to investigate the effects of the refrigerant charge amount on the performance of a water-to-water ground source heat pump with a variation of compressor speed and the secondary fluid flow rate. The water-to-water ground source heat pump was tested by varying refrigerant charge amount from -40% to 20% of full charge. Compressor speed was changed from 30 Hz to 75 Hz and the secondary fluid flow rate was adjusted from 6 LPM to 14 LPM. For all test conditions, EWTs of an indoor heat exchanger and an outdoor heat exchanger were maintained at standard conditions of ISO 13256-2. The slope of the COP with the variation of charge amount is much steeper at undercharged conditions than that at overcharged conditions. For all compressor speed, the variation of the system performance according to charge amounts showed the similar trends. However, the optimum charge amount of the system increased a little with an increment of compressor speed. When the secondary fluid flow rate decreased, the system was optimized at higher refrigerant charge amount conditions.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.95-101
• /
• 2011

This study proposes the accident estimation model developed based on the time-series cross-sectional data at 50 intersections in Cheongju. The data were collected repeatedly and accumulated from 2004 to 2007. This study focused on deriving the optimal among the various models including TSCSREG(Time Series Cross Section Regression). Four different models utilizing various elements affecting accidents were developed. Through a statistical test, it was found that the t values of independent variables of the fixed effect models were less than those of the random effect models. Two variables were then found to be positive to the accidents: the number of crosswalks at an intersection and the number of intersections.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.169.2-169.2
• /
• 2010

The research assesses the performance of the water-to-water heat pump system installed in Cheongju water treatment plant for cooling and heating ventilation. In summer season monthly averaged COP is ranged from 3.85 to 4.56 according to the water source temperature, and the performance is increased as the raw water temperature is dropped. While, heating performance is increased for the high temperature water source, and the monthly averaged COP is changed from 2.92 to 3.82. The correlation of the water source temperature and the heat pump performance shows a linear tendency by the simple regression of average data. In heating, the COP of heat pump system linearly rises according to the water source temperature. In comparison, the COP in cooling linearly reduces as the raw water temperature is raised. The goodness of fit at the simple regression shows the coefficient of determination 82% in cooling, 46% in heating. The electric cost of water-to-water heat pump is reduced by 40% compared to that of air source heat pump.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.178-178
• /
• 2009

High-density optical information storing equipment, which is using Blu-ray, is the next generation information storing equipment that has about form six times to thirty-five times capacities. and high-density optical information storing equipment uses high NA(Numerical Aperture) aspheric glass objective lens as optical pick-up equipment to record and recognize high-density date. Generally this objective lens is developed and produced through a way of GMP(Glass Molding Press) that uses molding core that is performde by Ultra precision grinding, but grinding performing that has high-accuracy is very difficult because objective lens form is high NA. In this research, we preformed Ultra precision turning, using single crystal diamond bite, about WC(Co 0.5%), sintering brittleness material that is used molding core's material for GMP. and we confirmed aspheric glass lens compression of deformities molding core's Ultra precision turning possibility by measuring surface roughness(Ra) and processing surface's condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.238-238
• /
• 2016

백색 발광다이오드(LED)는 기존 조명(백열등, 형광등)에 비하여 월등히 에너지를 절약할 수 있어 이미 상업적, 정책적으로 교체가 진행 중이다. 현재의 백색 LED를 만들기 위해서는 필연적으로 형광체를 사용해야 한다. 그러나 이 형광체에 의한 (a)Stocks 에너지변환에 의한 효율감소, (b)높은 공정비용, (c) 열적 안정성 저하를 피할 수 없다. 우리는 유기금속화학증착(MOCVD)과 선택적성장(selective-area epitaxial growth)방법을 이용하여 형광체를 쓰지 않고 3차원 구조체를 이용하여 백색 LED를 제작하여 전기구동하였고 전류의 세기를 변화하여도 지속적으로 동일한 백색광을 유지함을 보였다. 광학적 분석(cathodoluminescence)과 구조적 분석(scanning electron microscope, transmission electron microscope)을 진행하여 구조를 살피고 백색 발광의 원인을 분석하였다. 또한, 고배율 대물렌즈를 사용한 공간분해 광학적 분석실험(photoluminescence와 electroluminescence 데이터를 비교)으로부터 국소적 운반자의 주입효율을 분석하는 방법을 고안하여 실험하였다.[1] 향후 이 방법은 3차원 구조체 LED뿐 아니라 2차원 LED에도 응용하여 LED의 주입효율을 분석하는데 유용하게 사용될 수 있을 것이라 기대된다.

• Journal of the Korean Home Economics Association
• /
• v.17 no.1
• /
• pp.45-55
• /
• 1979

The purpose of this study is to investigate to what extent and how the infant's Object Attachment occurs. For this purpose, 28 mothers with their infants showing or having shown this phenomenon were interviewed. They were selected by the whole scale smpling method from 310 household -wives living at a delux Apt. in Seoul. The results are summarized as follows : 1. About 27% of the infants aged between 6 months and 6 years turned out to show this phenomenon. 2. Qulits, bed clothes, pillows and blankets, which infants have been closely contacted since their babyhood, were the major source of attachment objects. In general, these objects were proved to have soft, wasm, smooth, and glassy tactile sensation. 3.This phenomenon, in average, appeared since 13 months after birth, About 50% of the whole began to show this phenomenon between 9 and 14 month after birth. 4. Half of the infants didn't show a change of attachment strength, but as for the other half, the attachment strength increased after one year of age, and decreased after three years of age, as the social period commenced. 5. Infants needed attachment objects especially when they were driven by sleep, sense of emptiness, and monotonous or boring feeling. 6. There were little difference between Object Attachment behavior and motherinfant attachment behavior except "babbling", "using her as a base for exploration". Those behaviors did not appear in Object Attachment. 7. mothers said that their children's attachment objects played the role of substitute mother, pacificater, warmer, friend , etc. And they attributed this phenomenon's appearance to lack their physical contact with, ocnstant and warm care toward, their children or bottle feeding.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.290-290
• /
• 2009

Blu-ray Disk, the next generation optical information storing equipment used Blu-ray is the next generation leading storing equipment that has capacity is about from six times to thirty-five times bigger than the existing CDs, DVDs. Especially, we need elaborate optical pick-Up equipment to record and recognize detailed date. Moreover, Blu-ray disk has so narrow track-pitch so it is used high NA(Numerical Aperture) aspheric glass objective lens. In this research, we processed optical pick-up aspheric glass objective lens molding press core by parallel grinding method with ultra precision machining and mold core surface measured form accuracy(PV), surface roughness(Ra).

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.71-72
• /
• 2019

최근 공공안전 분야에서는 국민의 위험상황을 분석하여 선제적으로 예측을 하여 국민의 안전을 보장하기 위한 요구사항이 대두대고 있다. 또한 스마트폰 및 스마트워치와 같은 고성능 모바일 단말 기기들의 대중화로 인해 해당 기기들에 부착된 다양한 센서 데이터들을 융복합하여 분석할 경우, 수집한 센서 데이터의 잠재적 가치를 안전보장 측면에서 사용할 수 있는 장점이 있다. 본 논문에서는 대인, 대물, 장소에 해당하는 로그 데이터들을 융복합 분석하여 보호대상자의 안전을 지원하는 다중로그 플랫폼 기반 이동경로 분석 기법을 제안한다. 다중로그 플랫폼에서 수집하는 보호대상자의 이동 경로 궤적을 활용하여 과거에 축적된 이동경로 패턴과 비교를 통해 현재 경로가 평소에 이용하던 경로와의 유사도를 추천하게 된다. 해당 이동 경로 분석 시스템은 위치기반 멀티모달 센서 데이터를 융복합 하여 보호대상자의 안전을 보장하는데 기여 할 것으로 예상된다.