• Economic and Environmental Geology
• /
• v.45 no.3
• /
• pp.295-306
• /
• 2012

In this study, the Singal fault zone in the Gyeonggi massif is identified in the Kiheung area. Geotechnical investigations were carried out to locate and characterize of the Singal fault zone in the Kiheung reservoir area. The N-S striking Shingal fault is known to be a Riedel-type strike-slip fault within the Choogaryung rift. Along the fault zone, 62 bore holes were drilled and electrical resistivity survey of about 11km, and vibroseis seismic refraction and reflection survey of about 500m were done. From the result of investigations, it is found that the fault zone, consisting mainly of gouge and breccia, has maximum width of 300 meters with anastomosing geometry of secondary fractures developed subparallel to the fault zone. We interpret these geometric features to be the result of structural development of flower-structure type at the restraining band of strike-slip fault. However, there are uncertainties of this interpretation because there are virtually no outcrops in the area. Further investigation to understand geometric features and linkage style of the fault zone.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2002.10a
• /
• pp.17-30
• /
• 2002

삼척-도계지역 일대에 분포하는 조선누층군의 풍촌층 석회석은 품위 및 암상에따라 상부고품위대와 하부석회암대로 분대가 가능한데, 이는 삼척-태백간을 북북동으로 흐르는 오십천을 경계로 서쪽에 분포하는 풍촌층과 비교할 때 다소간의 암상차이를 보인다. 즉, 풍촌층의 특징중에 하나인 중부백운암대가 본 역 일대에서는 백운암화가 미약하여 비교적 소폭으로 확인되며, 상부백색대 역시, 발달정도가 미약한 특징을 보인다. 시추탐사결과 확인된 삼척-도계지역의 풍촌층 상부고품위대는 일반적으로 상부백색대$(\pm15m)$ - 백운암대$(\pm5m)$ - 암회색대$(\pm50m)$로 구분되는 것으로 나타났다. 각각의 품위는 상부백색대 : CaO $53_4\~55.6\%$, 백운암대 : MgO $3.0\~18.4\%$, 암회색대 : CaO $50.4\~54.2\%$로 나타나 제철용으로의 사용이 가능하나 백운암대에 대한 선별채광이 부분적으로 요망된다. 이들 석회석은 오십천대단층의 수반단층인 수조의 NNE계열 정단층들에 의해 빈번히 단절되어 있으며 일부지역에서는 EW향의 역단층에 의해 규제되기도 한다. 상기 제단층들은 석회암층을 단절시킬 뿐만 아니라 단층각력, 단층점토, 암맥 등의 불순대를 수반하므로 개발에 장애요소가 되고 있다. 상부고품위대 부존표고는 지역에 따라 다소 차이가 있으나 200ML 내외에서 대부분 확인이 가능하며 지표노출 규모는 작은 편이나 $10^{\circ}$이하의 완경사로 화절층 하부에 부존되어 있어 갱도 채광에 적합한 형태를 이루고 있다.

• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.17-30
• /
• 2002

삼척-도계지역 일대에 분포하는 조선누층군의 풍촌층 석회석은 품위 및 암상에따라 상부고품위대와 하부석회암대로 분대가 가능한데, 이는 삼척-태백간을 북북동으로 흐르는 오십천을 경계로 서쪽에 분포하는 풍촌층과 비교할 때 다소간의 암상차이를 보인다. 즉, 풍촌층의 특징중에 하나인 중부백운암대가 본 역 일대에서는 백운암화가 미약하여 비교적 소폭으로 확인되며, 상부백색대 역시, 발달정도가 미약한 특징을 보인다. 시추탐사결과 확인된 삼척-도계지역의 풍촌층 상부고품위대는 일반적으로 상부백색대($\pm$15m) - 백운암대($\pm$15m) - 암회색대($\pm$50m)로 구분되는 것으로 나타났다. 각각의 품위는 상부백색대 : CaO 53.4~55.6%, 백운암대 : MgO 3.0~l8.4%, 암회색대 : CaO 50.4~54.2%로 나타나 제철용으로의 사용이 가능하나 백운암대에 대한 선별채광이 부분적으로 요망된다. 이들 석회석은 오십천대단층의 수반단층인 수조의 NNE계열 정단층들에 의해 빈번히 단절되어 있으며 일부지역에서는 EW향의 역단층에 의해 규제되기도 한다. 상기 제단층들은 석회암층을 단절시킬 뿐만아니라 단층각력, 단층점토, 암맥 등의 불순대를 수반하므로 개발에 장애요소가 되고 있다. 상부고품위대 부존표고는 지역에 따라 다소 차이가 있으나 200ML 내외에서 대부분 확인이 가능하며 지표노출 규모는 작은 편이나 $10^{\circ}$이하의 완경사로 화절층 하부에 부존되어 있어 갱도 채광에 적합한 형태를 이루고 있다.

• Economic and Environmental Geology
• /
• v.24 no.4
• /
• pp.421-434
• /
• 1991

Ground magnetic surveys were conducted at four areas where the Yangsan fault, the most prominent lineament in the Kyeongsang basin, appears to be passed through. For data processing, IGRF correction, upward continuation and reduction-to-the-pole were performed. The automatic inversion by using a matrix computation method, which takes the depth to bottom layer of the horizontal two layer structure as the model parameter, has been attempted to delineate the subsurface structure. Upward continuation of the surface magnetic map to the same level of the aeromagnetic survey (KIER, 1989) resulted in very similiar patterns to those of aeromagnetic data. Subsurface modeling of eight profile data show that the strike and dip of the Yangsan fault in study areas are $N6^{\circ}-15^{\circ}E$, and near vertical to somewhat eastward, repectively, despite of the local lithological contrast of each study area. It seems that the magnetic effect of faulting in the study area 1, which locates in the most northern part of the survey areas, is disturbed by that of igneous intrusion. At study area 2, the possibility of volcanic or igneous intrusion, which is 200-300 meters wide along the fault plane was presented. At study area 3, unlike other study areas, distinct fracture zone of 500-700 meters in width was revealed along the surface fault line. The andesitic rocks of the study area 4 have very high susceptibilities and the fault line on surface of this area was shifted about 500 meter eastward, as compared with the inferred fault line by the previous study.

• Journal of the Korean Geophysical Society
• /
• v.2 no.2
• /
• pp.111-122
• /
• 1999

한반도 남동부 경상분지에 위치한 양산단층의 지전기학적 구조를 밝히기 위하여 경주시 이조리와 울산시 서하리, 양산시 삼감리와 회산리 사이에서 전기비저항 탐사를 수행하였다. 단층파쇄대는 낮은 전기비저항값을 가지며 단층파쇄대에 분포하는 풍화대는 남쪽으로 향할수록 두꺼워지는 것으로 나타났다. 풍화대의 깊이는 서하리와 회산리에서 약 100 m 이며 다른 지역에서는 약 50-70 m 정도이다. 단층파쇄대에 위치하는 풍화대의 전기비저항값은 회산리에서 얻어진 약 10 Ωm의 매우 낮은 값을 제외하고는 약 40-300 Ωm 정도이다. 연구지역 내에서는 풍화대 하부에 위치하는 기반암의 깊이가 양산단층을 따라 남쪽으로 향할수록 깊어지는 특징적인 변화 양상을 갖는 것으로 보인다. 수평탐사 결과는 양산단층에 가까워질수록 겉보기 비저항값이 감소함을 보여준다

• Economic and Environmental Geology
• /
• v.42 no.1
• /
• pp.9-25
• /
• 2009

The Northwestern Okcheon Metamorphic Belt in the Chungju area consists of the Munjuri Formation, the Daehyangsan Quartzite, the Hyangsanri Dolomite, and the Gyemyeongsan Formation, but the stratigraphy is still controversial. For a stratigraphic study, detailed stratigraphic sections were measured in two locations and mapping was carried out in the study area. The Munjuri Formation and the Daehyangsan Quartzite changed gradually in north and south section, but bedding parallel faults have developed in the boundary between two formations. The Daehyangsan Quartzite and the Hyangsanri Dolomite are conformable. Fault have developed in boundary between the Hyangsanri Dolomite and the Gyemyeongsan Formation. As a result of mapping in the study area, folding was recognized with $41^{\circ}/280^{\circ}$ plunging axis in the north part of the study area. Therefore, the bedding-parallel faults in the boundary might have occurred resulting from a layer parallel slip during the folding as well as the thrust. These results from this study and previous studies indicate that bedding-parallel faults in boundary between the Munjuri Formation and the Daehyangsan Quartzite are caused by a layer parallel slip during the folding. The fault between the Hyangsanri Dolomite and the Gyemyeongsan Formation is considered as a thrust fault, thereby the uppermost Gyemyeongsan Formation is placed under the Munjuri Formation. However the Gyemyeongsan Formation and the Munjuri Formation have similar age and rock composition. Hence, the Gyemyeongsan Formation is considered as an equivalent one with the Munjuri Formation. Therefore, the stratigraphy of Northwestern Okcheon Metamorphic Belt consists of the Gyemyeongsan/ Munjuri formations, the Daehyangsan Quartzite, and the Hyangsanri Dolomite in ascending order.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.645-654
• /
• 2020

We present the K-Ar age dating results of <0.1㎛ fraction of the selected fault rocks from the Yangsan fault in the Yeonghae area. Based on the mineralogical characterization, the <0.1㎛ fractions were mostly composed of 1Md illite polytype, or I-S interstratified mineral, which should be formed by fault activation. Therefore, we determined the timings of fault activation events by analyzing K-Ar age-dating for the <0.1㎛ fractions. Accordingly, the activation timings of Yangsan Fault in the Yeonghae area were determined as 45.5±1.1 Ma, 50.9±1.2 Ma, 58.2±1.3 Ma, 60.8±1.4 Ma, 65.3±1.6 Ma, 66.8±1.5 Ma, 67.1±1.5 Ma, and 75.1±1.7 Ma. These results indicate that at least 5-times of major fault events occurred in the Yangsan fault from late Mesozoic to Cenozoic Era. In the outcrop, age dating results tend to be younger age from the location of the oldest sample(75.1±1.7 Ma) toward to the both sides. From the results, it suggests that the fault activation extends from the location of oldest age saple to both sides. This geochronological research of the multiple fault activation ages for the Yangsan Fault will provide crucial information for establishing the tectonic evolution model in the southeastern part of the Korean Peninsula.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.235-240
• /
• 1999

From the seismic network data of the Korea Institute of Geology, Mining & Materials during 1995-1996, we derived a composite fault-plane solution of the microearthquakes occurred in the Yangsan fault area. The composite fault-plane solution of nine events shows the orientation of fault 15 ± 3°in strike, 60 ± 8°in dip and 140°in rake or 128 ± 3°in strike, 56 ± 8°in dip and 37°in rake. The compressional axis of the stress field trends ENE to WSW, and this field suggests strike-slip motion with thrust component. The result is consistent with the 1996 Yeong-weol event and the stress field in and around the Korean Peninsula, previously reported.

• Journal of the Korean earth science society
• /
• v.24 no.4
• /
• pp.361-368
• /
• 2003

We have investigated the electric resistivity structure of the fault zone located in the Hongseong area where a big earthquake with M 5.0 occurred in 1978. Usually, Electric and Electromagnetic methods are broadly operated in the field of engineering works since these methods are effective to understand the distribution of geological weak zones - fault or fracture zones. We have conducted the dipole-dipole array resistivity method and MT(magnetotelluric) method and interpreted the resistivity distribution of the fault zone with the aid of various inversion methods. An MT survey was performed at 18 points along a 2.9 km survey line perpendicular to the fault line and a magnetic dipole source was used to enhance the S/N ratio in the high frequency. A Electric dipole-dipole array resistivity survey with the dipole length of 50 meters was carried out perpendicular to the fault. In view of two survey results, the fault marks the boundary between two opposite resistivity structures, especially the low resistivity zone is exhibited deeply through the prospective fault line. The result that the low resistivity zone is located at the center of the fault zone corresponds with the fact that the fault zone of the Hongseong area is active. We expect these results to provide basic information about the physical properties of fault zones in Korea.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.97-104
• /
• 2017

Here we present the timings of reactivated events from a fault in the northern Pohang area, which should be located at the northern-end of Yangsan fault line, the major fault in the southeastern Korean Peninsula. Recently developed illite-age-analysis (IAA) approach was employed for determining the fault-activated timing, combined with illite-polytype quantification using the optimized full-pattern-fitting (FPF) method, and K-Ar age-dating for each size fraction($<0.1{\mu}m$, $0.1-0.4{\mu}m$, and $0.4-1.0{\mu}m$) of 4 fault clay samples. Two chronological records of brittle fault-activation events were recognized at $19.6{\pm}1.86Ma$ and $26.1{\pm}2.55-27.9{\pm}3.46Ma$. The ages are much younger than those of fault clays from Sangcheon-ri area (41.5~43.5 and 50.7 Ma), the southern part of Yangsan fault line, and are close to the timing of East Sea-opening event. Further chronological analysis for additional sites of the Yangsan fault should be needed to reveal the time-scheme of the tectonic events and their spatial distributions along the fault line.