• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 1999.04a
• /
• pp.33-35
• /
• 1999

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2003.04a
• /
• pp.115-118
• /
• 2003

• Korean Journal of Environment and Ecology
• /
• v.11 no.1
• /
• pp.137-148
• /
• 1997

This study was conducted to select appropriate woody species and to propose appropriate woody species and to propose appropriate mounding hight through analysis of soil characteristics, planting state, draining state, growth amount and injured index of woody species. Soil acidity was pH 5.9~7.4, as alkaline soil. The state of draining was proved to be inappropriate for the growth of woody species because of bad draining state. Injured index of woody species were Prunus serrulata var, spontanea in deciduous tree because of polluted water leaked from sanitary landfill and density of planting tree. Appropriate mounding heignt of the planted area which was itensive injured wood species was not less than 80cm. Appropreate woody species in wanggyoi-dong apartment complex were Zelkova serrata, Acer trifloum, Acer buergerianum, Sophora japonica, Ailanthus altissima and appropriate mounding height was not less than 50~60cm.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.2
• /
• pp.61-69
• /
• 2024

Wave conditions are crucial for offshore wind farm design, particularly in determining structural loads and layout. However, there is limited wave hindcasting research for the Wangdeungdo Island area, a potential offshore wind site. This study used the MIKE21 model for a year-long wave hindcast around Wangdeungdo in 2021. Validation showed high reproducibility for significant wave heights with RMSE values of 0.177 and 0.225 and Pearson correlations of 0.971 and 0.970 at Sangwangdeungdo and Buan buoys. Subsequent analysis of the wave characteristics near Wangdeungdo indicated significant seasonal variations and differences in maximum significant wave heights across locations, which are expected to significantly impact the design loads for offshore wind structures.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.183-198
• /
• 1997

This case study was conducted by verification the site characteristics based on the questionnaire and interview obtained from the all factories located at No. 1 developing area in Kumi industrial complex. The site characteristics were presumed from the process of location behavior and spatial linkage. Kumi industrial complex was developed to improve export industry at national levels by providing chief land price and benefiting various tax. Kumi industrial complex which enticed many factories is playing an important role in export industry in Korea. At beginning, the detention of large enterprises promoted the establishment of related small to medium sized factories into the complex. Two distinctive industries. textile and electronic, were reflected by the purpose to establish the complex and industrial characteristics of Taegu city. respectively. In Kumi industrial complex, positive responses on traffic and raw material supply and negative reactions on the environmental impact on social community as well as high labor charge were investigated. Especially the higher labor cost prevented to hire laborers effectively. In the linkages of spatial and raw material, most factories in the complex depended on the availability of out side the Kumi city. For the textile factories, the supply of raw material and parts were relied on Taegu and/or other cities, whereas in electronic factories purchased them mainly from other cities and partly from abroad. Although questionnaire and interview suggested it, most of the parts were supplied by a parts maturing companies on the complex to a few large enterprises. In the marketing linkage, textile factories revealed higher relation-ship with the foreign countries and sewing factories in Korea. On the other hand, electronic factories have strong relation-ships in the marketing linkage to the parts supplying companies in the complex or large-scale resembling companies in other cities. In the textile companies, the right for decision on purchasing raw materials and parts is belonging to the owner whereas mother enterprise usually have the right for the marketing. In the case of the electronic factories, all the purchasing activities are related to the sub-contracting companies. In the service linkage, the Quality of the service created spatial distinction. There was high linkages on inside of Kumi complex for the low grade services such as repairing and installing machines, whereas strong linkages on outside of the complex for the high grade services such as management, law, taxation, new product development. and manufacturing technology. In the linkages of activity on the R&D (research and development), electronic factories do not have sufficiently qualified institutes in the complex. Strong regional linkages in the field of textile and electronic industries revealed limitations of the local industrial complex. In the sub-contracting linkage, high linkage ship within Kumi boundary reflected the characteristics of industrial site in the complex. There, most decisions by the companies centered by the mother enterprise.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.1
• /
• pp.41-47
• /
• 2022

In this study, rainfall water outlet water quality monitoring was performed on the C industrial complex to evaluate the characteristics of non-point pollutant runoff from the industrial complex during rainfall and to use it as basic data for calculating the load and unit of non-point pollutant. As a result of calculating EMC according to the outflow amount by rainfall event, the 1st rainfall showed EMCs ranges of BOD, COD_Mn, SS, T-N, and T-P of 1.32~48.76, 3.32~43.75, 2.89~199.43, 2.76~8.93, 0.08~068, and the 2nd rainfall was 0.5~2.9, 2.71~7.13, 2.82~174.94, 1.33~4.03, 0.01~1.28 mg/L, respectively. As a result of calculating the ratio of cumulative outflow and cumulative pollution load, most of the pollution load was less than the rainfall outflow, but over time, the initial washing phenomenon occurred as the ratio of cumulative rainfall outflow and cumulative pollution load increased to more than 1.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.3 s.110
• /
• pp.1-17
• /
• 2005

오늘날 지속가능한 발전의 주요 목적으로서 환경의 효과적 보호와 신중한 자연자원의 이용이 강조된다. 이와 같은 목적들을 성취하기 위해서 종합적인 경관 정보가 필수적이다. 한국의 경우, 도시화는 전통적인 농촌 경관 변화, 산림 손실과 단편화 등 많은 환경 문제를 야기했다. 특히 산림이 높은 생물 다양성 가치를 갖고 있는 한국으로서는 산림 손실과 단편화는 생태관점에서 보면 아주 치명적이다. 현재 개인 또는 공공 부분 개발 프로젝트를 위한 환경 영향 평가의 일부분으로 시각 경관 영향 평가가 요구된다. 그러나 이런 시각 경관 영향 평가는 단지 전체 경관의 일부분의 경관 정보만을 제공하고, 특히 현재 경관 평가에서는 경관의 생물 다양성 가치를 평가하지 않는다. 본 연구는 이와 같은 문제점들을 극복하고 한국 상황에 맞는 지속가능한 경관 계획을 위한 필수적인 종합 경관 정보를 제공하기 위해서, 경관 특성과 생물 다양성 가치 평가를 위한 생태 이질성 지수를 결합한 진보된 경관 특성 평가 방법론을 제시하는데 그 목적이 있다. 이 방법론을 통해 경관 특성 평가에서 12가지 경관 특성 유형(type)을 분류하였고 그것의 분포, 경관 특성적 형태, 경관 특성에 부정적인 영향을 줄 수 있는 개발 압력 등을 분석하고 서술하였다. 분석 결과, 주택과 산업 단지 개발, 농지 형질 패턴 변경, 수변 공간 개발 등이 주요 개발 압력으로 나타났다. 경관 생태 이질성 평가 결과에서는 도시근교 지역과 농촌 경관 특성 유형 지역에서 잠재적 생물 다양성 가치가 높았다. 산림 지역 경관 특성 유형에서는 잠재적 생물 다양성 가치가 중간 수치로 나온 반면 도시 경관 특성 유형에서의 잠재적 생물 다양성 가치는 아주 낮았다. 비록 제한된 데이터와 경관 생태 이질성 지수 사용으로 인한 문제점들(스케일 종속적, 변화 패턴이 예측하기 힘든 지수, 자의적인 분류시 다른 결과 발생, 더 종합적인 생물 다양성 잠재력을 평가하기 위해서는 더 많은 다른 경관 생태 지수 필요 등)이 제기되었지만, 이 연구에서 제시된 진보된 경관 특성 평가 방법론을 통해 얻은 종합적인 경관 정보가 지속가능한 경관계획을 할 때 어떻게 잘 활용되어질 수 있는지 예로써 증명하였다. 그 결과 진보된 경관 특성 평가 방법론이 지속가능한 경관 계획을 위한 수단으로 사용될 수 있을 것으로 사료된다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.130-136
• /
• 1993

단주기파군에 의하여 발생되는 장주기파를 나타내는 용어로 surf-beats, edge파 그리고 평균수위강하(set-down 또는 group bounded long wave)등이 사용되어지고 있다. 이들의 발생성격에 대한 물리적 특성으로, surf-beats와 edge파는 일반적으로 천해역에서 발생하는 비선형간섭(쇄파특성) 및 해안선의 반사성과 관련있으며 평균수위강하는 단지 단주기파에 의하여 형성된 파군의 특성과 관련을 갖게 된다. (중략)

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.2
• /
• pp.27-37
• /
• 2001

Using satellite image and GIS, spatial distribution characteristics of black locust forest as honey plant area was identified and analyzed. Upon the result, the most suitable area for black locust forest was selected through the integration analysis of transparent overlay. The variables used for spatial analysis such as topography(elevation, aspect, slope), soil, drainage, distance from urban area, land use, meteorological elements were considered. Based on the suitability analysis, it was clarified that the integration of linear and factor combination technique is greatly efficient method for the most suitable area. In addition, Gokung, Imgo, Chungtong, Hwanam area were shown to be suitable in Young-chun Area. As the result of suitability analysis for honey plant area of black locust in Young-chun using satellite image and GIS, the present portion of potential distribution area was produced about 42.53%. The portion of most suitable area for honey plant area of black locust was about 26.77%. Finally, the total area for honey plant area of black locust in Young-chun came up to $15.79km^2$. Additionally, satellite image and GIS were expected to be significant tools for suitability analysis of honey plant complex area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.631-639
• /
• 2010

The layout of haul routes within a construction site of large complex projects needs to be carefully determined as the productivity of earthwork activity heavily depends on the efficiency of the layout and the routes are not likely to change once they are settled. This paper aims to provide a construction planner with a reliable framework to create an efficient layout of haul routes within a large complex construction site. To construct the framework, five factors affecting haul route layout and the productivity of earthwork activity are described along with the associated rules of thumb recommended by design and field experts. In addition, a methodology based on spatial analysis using raster format in GIS is proposed to further increase haul route efficiency. The proposed planning framework enables a construction planner to easily find a more reliable route layout by thoroughly considering the key factors prior to setting up an earthmoving plan.