• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.231-238
• /
• 2008

This study proposed the method of phosphate recovery from municipal wastewater by using ferrous iron waste, generated from the mechanical process in the steel industry. In the analysis of XRD, ferrous iron waste was composed of $Fe_3O_4$ (magnetite), practically with $Fe^{2+}$ and $Fe^{3+}$. It had inverse spinel structure. In order to identify the adsorption characteristic of phosphate on ferrous iron waste, isotherm adsorption test was designed. Experimental results were well analyzed by Freundlich and Langmuir isotherm theories. Empirical constants of all isotherms applied increased with alkalinity in the samples, ranging from 1.2 to 235 $CaCO_3/L$. In the regeneration test, empirical constants of Langmuir isotherm, i.e., $q_{max}$ (maximum adsorption capacity) and b (energy of adsorption) decreased as the frequency of regeneration was increased. Experiment was further performed to evaluate the performance of the treatment scheme of chemical precipitation by ferrous iron waste followed by biological aerated filter (BAF). The overall removal efficiency in the system increased up to 80% and 90% for total phosphate (TP) and soluble phosphate (SP), respectively, and the corresponding effluent concentrations were detected below 2 mg/L and 1 mg/L for TP and SP, respectively. However, short-circuit problem was still unsolved operational consideration in this system. The practical concept applied in this study will give potential benefits in achieving environmentally sound wastewater treatment as well as environmentally compatible waste disposal in terms of closed substance cycle waste management.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.3
• /
• pp.214-219
• /
• 1990

This study was conducted to characterize red worm(Lumbricus rubellus) and its cast reared six months using with pulp sludge, mixture of pulp sludge and methane sludge, and cow manure and methane sludge. The results obtained were as follows: 1. The optimum growth temperature ranged from $16^{\circ}C$ to $25^{\circ}C$ and monthly weight increase was about one kilogram per square meter. 2. The weight of red worm increased 9 to 11 percent reared with mixture of cow manure and methane sludge compared to pulp sludge. 3. Red worm contained large amount of amino acid, including. Lycine, which, might be a good source for a feed additive. 4. Yields of red worm cast ranged from 90 to 95 ton/10a/year on dry weight base. 5. CEC of red worm cast varied from 19.4 to 49.9 meg/100g and O.M content ranged from 26.4 to 35.1 percent. It contained lots of nutrients resulting in a good fertilizer source.

• Microbiology and Biotechnology Letters
• /
• v.44 no.3
• /
• pp.333-340
• /
• 2016

An alkaline protease was purified and characterized from an alkalophilic microorganism, Bacillus sp. DK1122, isolated from soil in central Korea. The optimum temperature and pH for the growth of the producer strain were 40℃ and pH 9.0, respectively. The protease was produced aerobically at 40℃ after 24 h incubation in modified Horikoshi I medium (pH 9.0) containing 0.5% (w/v) glucose, 0.8% (w/v) yeast extract, 0.5% (w/v) polypeptone, 0.1% (w/v) K₂HPO₄, 0.02% (w/v) MgSO₄·7H₂O, 1% (w/v) Na₂CO₃, and 3% (w/v) NaCl. The alkaline protease was purified by 70% ammonium sulfate precipitation of the culture supernatant of Bacillus sp. DK1122, followed by CM-Sepharose chromatography. The molecular weight of the enzyme was estimated to be 27 kDa on the basis of SDS-PAGE. The optimum temperature and pH for the protease activity were 60℃ and pH 9.0, respectively. Addition of CaCl₂ increased the thermal stability of the purified protease, where 90% of protease activity was retained at 60℃ for up to 3 h. Consequently, it is expected that the alkaline protease from this study, exhibiting stability at pH 7–9 and 60℃, may be promising for application in the food and detergent industries.

• Archives of design research
• /
• v.16 no.2
• /
• pp.161-170
• /
• 2003

This study aims to understanding the effects of culture on websites with emphasis on the website structure and navigation. The website is inherently‘cultural’because anyone around the world can access to website if he or she is equipped with appropriate equipment. For the importance of cultural role in website, various researches have been conducted to understand the relationship between culture and website. However they tended to focus mainly on phenomenal matters such as color, layout, icon etc. There have been not so many thorough attempts to causal relationships between website and‘thick culture’in depth. The study conducted cross-cultural usability testing of websites between Korea and America. At first, representative I-commerce websites of Korea and America were selected and they were analyzed by the selected frameworks such as layout, display type, element type, and the relationship with homepage and sub-page navigation. The results were used to construct typical prototypes of website for Korea and America for experiment. Two websites were used for cross-cultural usability testing though specially-developed remote testing. 20 users from each country participated in the usability testing. The result shows that Korean users peformed better usability testing for Korean style structure of website while American counterparts showed better performances in American style of websites. Other various significant findings were revealed.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.80-85
• /
• 2015

In this paper, we present, an indstrial RFID layered microstrip patch antenna is designed using an inset feed method in order to improve recognition rates in a long distance as tags are attached to metal object by improving a problem of feeding power in fabricating metal tags and reducing effects of metallic object. The inset feed shows a distinctive characteristic that has no separation between emitters and feed lines differing from a structure with the conventional inductive coupling feed. This structure makes possible to produce a type that presents a low antenna height and enables impedance coupling for tag chips. Although it shows a difficulty in the impedance coupling due to increases in the parasite capacitance between a ground plane and an emitter in an antenna according to decreases in the height of a tag antenna, it may become a merit in designing the tag antenna because the antenna impedance can be determined as an inductive manner if a shorted structure is used for feeding power. Therefore, in this paper the microstrip patch antenna is designed as a modified type and applies the inset feed in order to reduce effects of metallic objects where the antenna is be attached. Also, the antenna uses a multi-layer structure that includes a metal plate between radiator and ground instead of using a single layer.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.16-21
• /
• 2012

Recently, an importance of culture industry has been emphasized through an increased income level, spare time and changed values of modern people. And demands of the performance, arts, exhibit are steadily being increased. However the stage equipment depends on foreign manufactures on account of the inactive domestic technical skills. Especially in the lighting direction part, it is essential to control the lighting source and detect the moving line of actors but it generally uses the manual control type and realization of actor's moving line regardless of existing IT-based technologies. Also the system operation of existing sensor-based tracking and detecting technologies depends on the main lighting source of the stage. Therefore, this paper proposed LED lighting control system using the variable FOV and multi sensor-based tracking algorithm, which are possible to efficiently track the stage actors and direct the stage lights. Also we demonstrated the practicality and possibility of realization through the integrated experiment of the proposed system and implementation of the salient hardware, software. Additionally, the usefulness of proposed system was demonstrated using performance simulations and actual measurements of implemented sensor output.

• Membrane Journal
• /
• v.15 no.2
• /
• pp.157-164
• /
• 2005

In this study, composite hollow fiber membranes were developed for the recovery of olefin monomers in polyolefin industry off-gases. Polyetherimide (PEI) hollow fiber support membranes were fabricated from spinning solutions containing PEI, NMP and polyethylene glycol (PEG). The influence of dope solution and inner coagulant composition on the permeation properties and structure of hollow fiber supports was examined. PDMS was used as a selective layer and coated on PEI hollow fiber support. The thickness of active layer was controlled by changing coating solution concentration. The permeation properties of hollow fiber supports and composite membranes were characterized with a pure gas permeation test. The optimized composite hollow fiber membrane has $10\;{\mu}m$ selective layer and shows excellent separation performance; the ideal selectivity of olefins over nitrogen is in the following order: 1-butylene (6.4) > propylene (17) > ethylene (97), which selectivity data are similar to the intrinsic olefin/nitrogen selectivities of PDMS. This confirms that the new composite hollow fiber membranes suitable for olefin off-gas recovery has developed successfully.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.246-256
• /
• 2003

For the olefin recovery from polyolefin off-gas, the permeation behaviors of olefins and nitrogen were investigated through three kinds of PDMS membranes - cross-linked PDMS membranes, a polysiloxaneimide membrane, and oligo-PDMS modified PDMS membranes. Their pure gas permeabilities were measured as a function of operation temperature(-20 to $50^{\circ}C$) and pressure(1 to 25 atm) with ethylene($C_2\;H_4$), propylene($C_3\;H_6$), butylene($C_4\;H_8$), and nitrogen($N_2$) gases. The permeabilities of olefins and nitrogen highly depended upon the nature of PDMS membranes. Among these membranes, cross-linked PDMS membranes showed stable and high olefin/nitrogen selectivities over a wide operation pressure range and further study in various test conditions. Their permeability of olefin and nitrogen were governed by the condensation temperature(solubility selectivity) and plasticization, not the order of the size(diffusivity selectivity) of gases, which matched well with the general permeation behavior of rubbery polymeric membranes for condensable and non-condensable gases. With increasing feed pressure or decreasing feed temperature, the permeabilities of more condensible olefins increase highly, presumably due to high solubility and plasticization, but that of non-condensible nitrogen decreases slightly and thus, the selectivities of olefin/nitrogen increase highly.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.419-426
• /
• 2015

The aims of this study were to isolate spore-forming Bacillus strains that exhibit high digestibility and anti-pathogenic bacteria toward feed for calves. Total 136 spore-forming strains were isolated from finished feeds and their ingredients. Among them, 93 strains were identified as Bacillus species when analyzed by 16S rRNA sequencing. For industrial use, three strains named as Bacillus licheniformis SHS14, B. subtilis LCB7, B. amyloliquefaciens LCB10 were selected after evaluating the industrial standards that are related with heat and acid resistance, enzyme activities, and anti-pathogenic activities against Samonella dublin ATCC15480 and E. coli K99. After each culture, 3 selected strains were mixed together at 1:1:1 (v/v/v) ratio and then prepared as the mixed starter culture for feeding. The changes in microbial community were analyzed via 16S rRNA metagenomics. The initial community ratio among three strains was maintained even after manufacturing into final products. Also, in vitro, enzymatic and anti-pathogenic activities were almost same as those when cultured in single culture, and results of anti-pathogenic activities conducted with calves showed 90% activities against lincomycin, which would be indicative of a promising feed starter.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.1
• /
• pp.41-48
• /
• 2012

The purpose of this study was to assess the antioxidant activity of vegetable extracts (pumpkin, aloe, and artichoke) containing Protaetia brevitarsis (PB) and the clinical and pathological changes in ICR mice after a single oral administration. The total polyphenol (TP) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging ability, total radical trapping antioxidant potential (TRAP), oxygen radical absorbance activity (ORAC), and single cell gel electrophoresis assay were done to measure their antioxidant activities. The effect of vegetable extracts containing PB in TP and the ORAC value was significantly higher than those without PB. In addition, all extracts had effective $DPPH{\cdot}$ scavenging and $ABTS{\cdot}+$ scavenging activities. The protective effect of vegetable extracts with/without PB on $H_2O_2$-induced DNA damage was found. In a single-dose toxicity study, mortality, body weight, physiological signs, and biochemical analysis were analyzed. Seventy mice were randomly assigned to 7 experimental groups and were administered three vegetable extracts with and without PB (2 g/kg). A full 14 days after administration, no mice mortality was observed in any group. Body weight, physiological signs, and biochemical analysis were never significantly different from those of the control group. Taken together, these findings indicate that vegetable extracts containing PB with antioxidant activities and safety could be applied as medicinal and edible resources in an industrial area.