DOI QR코드

DOI QR Code

Application of Adsorption Characteristic of Ferrous Iron Waste to Phosphate Removal from Municipal Wastewater

폐산화철의 흡착특성을 이용한 도시하수내 인 처리

  • Kim, Jin-Hyung (Department of Environmental Engineering, Chungbuk National University) ;
  • Lim, Chae-Sung (Department of Environmental Engineering, Chungbuk National University) ;
  • Kim, Keum-Yong (Department of Environmental Engineering, Chungbuk National University) ;
  • Kim, Dae-Keun (Department of Environmental Engineering, Chungbuk National University) ;
  • Lee, Sang-Ill (Department of Environmental Engineering, Chungbuk National University) ;
  • Kim, Jong-Soo (Department of Civil Engineering, Sunmoon University)
  • Published : 2008.09.30

Abstract

This study proposed the method of phosphate recovery from municipal wastewater by using ferrous iron waste, generated from the mechanical process in the steel industry. In the analysis of XRD, ferrous iron waste was composed of $Fe_3O_4$ (magnetite), practically with $Fe^{2+}$ and $Fe^{3+}$. It had inverse spinel structure. In order to identify the adsorption characteristic of phosphate on ferrous iron waste, isotherm adsorption test was designed. Experimental results were well analyzed by Freundlich and Langmuir isotherm theories. Empirical constants of all isotherms applied increased with alkalinity in the samples, ranging from 1.2 to 235 $CaCO_3/L$. In the regeneration test, empirical constants of Langmuir isotherm, i.e., $q_{max}$ (maximum adsorption capacity) and b (energy of adsorption) decreased as the frequency of regeneration was increased. Experiment was further performed to evaluate the performance of the treatment scheme of chemical precipitation by ferrous iron waste followed by biological aerated filter (BAF). The overall removal efficiency in the system increased up to 80% and 90% for total phosphate (TP) and soluble phosphate (SP), respectively, and the corresponding effluent concentrations were detected below 2 mg/L and 1 mg/L for TP and SP, respectively. However, short-circuit problem was still unsolved operational consideration in this system. The practical concept applied in this study will give potential benefits in achieving environmentally sound wastewater treatment as well as environmentally compatible waste disposal in terms of closed substance cycle waste management.

본 연구에서는 철가공 산업에서 배출되는 폐산화철을 활용하여 인 흡착특성을 평가하였다. 또한 도시하수 대상으로 폐산화철 접촉조를 적용한 생물반응조 공정의 운전 가능성을 평가하여 다음과 같은 결론을 얻었다. 1. 폐산화철의 표면특성은 inverse spinel 결정구조인 $Fe_3O_4(FeO{\cdot}Fe_2O_3)$가 주된 형태인 것으로 확인되었다. 2. 폐산화철의 인 흡착특성은 용액의 알칼리도에 따라 다소 차이를 보이나 Freundlich 과 Langmuir 등온흡착 이론식이 잘 적용되었다. 폐산화철의 인 흡착은 알칼리도에 영향을 받는다. 3. 폐산화철의 재생 횟수가 증가할수록 폐산화철의 흡착 특성은 상이하였으며, Freundlich 등온흡착식이 Langmuir 등온흡착식 보다 더 높은 상관성 및 유의성을 보였다. 또한 재생이 반복될수록 흡착능은 감소하였다. 4. 단일 BAF 시스템 운전시보다 폐산화철 접촉조를 적용한 BAF 시스템이 인 처리효율을 약 40%정도 향상시켰으며, 유출수는 총인(TP) 2 mg/L, 용존 인(SP) 1 mg/L 이내로 방류수 법적 기준치를 만족시킬 수 있었다. 5. 상기의 연구결과 폐산화철을 적용할 경우 인 제거가 안정적이며 제거효율이 높은 것으로 판단되며, 대체 흡착제로 활용 가능성이 높을 뿐만 아니라 폐자원의 활용이라는 환경 경제적인 측면에서도 그 가능성이 높은 것으로 판단된다.

Keywords

References

  1. Sewage management plan (2005), Environmental Management Corporation
  2. Lee, S. H. and Jang, J. H. (2004) Preliminary study on the development of phosphorous removal process by converter and furnace slags, J. KSWW, 18(2), 137-144
  3. Lee, S. H., Vigneswaran, S., Ahn, K. H. (1997) Phosphorus removal using steel industry byproducts: effects of agitation and foreign material, J. KSWQ, 13(4), 335-361
  4. Clark, T., Stephenson, T. and Pearce, P. A. (1997) Phosphorus removal by chemical precipitation in a biological aerated filter, Wat. Res., 31(10), 2557-2563 https://doi.org/10.1016/S0043-1354(97)00091-2
  5. Bastin, O., Janssens, F., Dufey, J. and Peeters, A. (1999) Phosphorus removal by a synthetic iron oxide-gypsum compound, Ecol. Eng., 12, 339-351 https://doi.org/10.1016/S0925-8574(98)00077-9
  6. Cooper, P., Dee, T. and Yang, G. (1993) Nutrient removal methods of meeting the EC urban wastewater directive, Paper prested at the 4th Annual Conference on Industrial Wastewater Treatment, Esher, Surrey. 10
  7. Unnithan M. R., Vinod, V. P. and Anirudhan, T. S. (2002) Ability of iron(III)- loaded carboxylated ployacrylamide - grafted sawdust to Remove Phosphate Ions from Aqueous Solution and Fertilizer Industry Wastewater: Adsorption Kinetics and Isotherm Studies, J. Appl. Polym. Sci., 84, 2541-2553 https://doi.org/10.1002/app.10579
  8. Irdemez, S., Demircioglu, N. and Yildiz, Y. S. (2006) The effects of pH on phosphate removal from wastewater by electro-coagulation with iron plate electrodes, J. Hazard. Mater., B137, 1231-1235
  9. Weon, S. Y. and Lee, S. I. (2004) Removal nitrogen and phosphorus from wastewater using natural zeolite and iron Oxide,' J. KSWQ, 20(2), 104-109
  10. James, B. R., Rabenhorst, M. C. and Frigon, G. A.(1992) Phosphorus sorption by peat and sand amended with iron oxides or steel wool, Wat. Environ. Res., 64(5), 699-705 https://doi.org/10.2175/WER.64.5.6
  11. APHA(American Public Health Association), AWWA(American Water Works Association) and WEF(Water Environment Federation) (2005) Standard methods for the examination of water and wastewater, 21th Ed., Washing DC, USA. 8-10-8-11
  12. Lee, Y. S. and Kim, D. M. (1993) Removal phosphorus using iron contactor by intermittent aeration activated sludge process, Kor. J. Env. Hlth. Soc., 19(4), 33-37
  13. ICDD, Powder Diffraction File, PCPDFWIN v.2.00 (1998) The International Centre for Diffraction Data, NewtoWn Square, PA 19073-3273, USA
  14. Streat M., Hellgardt K., Newton, N.L.R. (2008) Hydrous ferric oxide as an adsorbent in water treatment Part3: Batch and mini-column adsorption of arsenic, phosphorus, fluorine and cadmium ions, Process Saf. Environ. Prot., 86, 21-30 https://doi.org/10.1016/j.psep.2007.10.009
  15. Holford, I. C. R. (1982) The comparative significance and utility of the Freundlich and Langmuir parameters for characterizing sorption and plant availability of phosphate in soils, Aust. J. Soil Res., 20, 233-242 https://doi.org/10.1071/SR9820233
  16. Benjamin, M. M. (2002) Chemistry of metals in aqueous systems, Water Chemistry, 1st Ed.., McGraw- Hill, Singapore, pp.363-461
  17. Jain, A., Raven, K. P, and Loeppert, R. H. (1999) Arsenite and arsenate adsorption on ferrihydrite: surface change reduction and net OH- release stoichiometry, Environ. Sci. Tech., 33, 1179-1184 https://doi.org/10.1021/es980722e
  18. 上甲勳, 小泉求(1980) 晶析法によゐ下水中のり の燐除法に關する(第1報), 下水道協會誌, 17(197)
  19. 上甲勳, 岡田(1981) 晶析法によゐ下水中のりの燐 除法に關する(第1報), 下水道協會誌, 18(200)
  20. Ferguson, J. F. (1973) Calcium phosphate precipitation at slightly alkaline ph value, J. WPCF, 45(4), 620-631
  21. Zoltek, J. J. (1974) 'Phosphorous removal by ortho phosphate nucleation, J. WPCF, 46(11), 2498-2520
  22. Yang, S. H., Jeong, I. G. and Choe, G. U. (2006) Water supply and sewerage engineering, 1st Ed., DongHaw Technology puplishing Co., Seoul, Korea, pp. 371-373

Cited by

  1. A Study on the Mill Scale Pretreatment and Magnetite Production for Phosphate Adsorption vol.37, pp.4, 2015, https://doi.org/10.4491/KSEE.2015.37.4.246
  2. Effects of alkali species and concentration on the size distribution of the co-precipitated magnetite particles used for phosphate adsorption vol.30, pp.4, 2016, https://doi.org/10.11001/jksww.2016.30.4.409