• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.145-146
• /
• 2021

본 연구에서는 카메라의 촬영 시점에 의해서 발생되는 원근감이 광학 흐름 생성에 어떠한 영향을 주는지 살펴보고 광학 흐름 기반 이상행동 탐지 솔루션의 성능을 고도화하기 위해 기존 광학 흐름 영상으로부터 소실점 기반 가중치 행렬을 계산하여 원근감에 따른 광학 흐름 정도를 평활하는 기법에 대해서 연구한다. 카메라의 뷰포인트에 따라 원근감의 발생 정도나 객체의 크기 및 움직임의 정도가 달라지게 되며, 이는 원본 영상 프레임을 광학 흐름의 크기와 방향성으로 표현하는 영상 변환 네트워크를 가진 생성적 적대 신경망을 학습할 때 정상적인 행동 패턴의 범위를 결정짓는 데 방해가 될 수 있다. 이러한 문제를 해결하기 위하여 데이터셋의 배경으로부터 소실점을 추출하고 원근감에 따라 결정되는 광학 흐름의 크기를 평활하는 기법을 개발하여 기존 모델의 성능과 비교하였으며, 프레임 단위의 정확도 성능이 5.75% 향상된 것으로 확인되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.981-987
• /
• 2017

Jeju Island is a volcanic island which has a large permeability. Groundwater is a major water resources and its proper management is essential. Especially, there is a multilevel restriction due to the groundwater level decline during a drought period to protect sea water intrusion. Preliminary countermeasure using long-term groundwater level prediction is necessary to use agricultural groundwater properly. For this purpose, the monthly groundwater level prediction technique by Artificial Neural Network model was developed and applied to the representative monitoring wells. The monthly prediction model showed excellent results for training and test periods. The continuous groundwater level prediction model also developed, which used the monthly forecasted values adaptively as input data. The characteristics of groundwater declines were analyzed under extreme cases without precipitation for several months.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.785-790
• /
• 1993

Three ester-type chitin derivatives were synthesized by reacting chitin with acetic anhydride, propionic anhydride and n-butyric anhydride to form acetyl chitin(AC), propionyl chitin(PC) and n-butyryl chitin(BC). Methanesulfonic acid was used as a catalyst. FT-IR spectra and solid state CP/MAS $^{13}C-NMR$ spectra of three chitin derivatives showed that the substituents were mainly incorporated in the $C_6$ position of chitin. The ester-type chititn derivatives were dissolved well in formic acid and swollen in aqueous acidic solution.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1223-1232
• /
• 2008

In this paper, an analytic method is proposed to extract the reference slot admittance required for the design of a non-resonant waveguide edge slot array. A slot and two neighboring transmission line sections of the numerous alternately inclined slots with the identical inclination angle are modelled as a uniform lossy transmission line, and thus, the total ABCD matrix is easily calculated and compared with the simulated or measured one. From this procedure, the complex characteristic impedance and the complex propagation constant of the lossy transmission line are calculated and the normalized slot admittance is analytically obtained. In order to validate the proposed method, the admittance value of a reference slotted waveguide fabricated for designing the X-band edge slot array is extracted and it is compared with the one obtained by the other conventional method.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.88-93
• /
• 2011

To resolve the problem which is demand and supply imbalance of fine aggregate by the shortage of natural fine aggregate and the environment regulations, the studies for the application of recycled fine aggregate made from waste concrete have been recently carried out. The objective of this study is to shed light on the mechanical properties and durability performance of concrete using recycle fine aggregate with various water to cement ratios and unit water contents. And it is intend to propose the fundamental data for structural application of recycled concrete. In particular, the effects according to the variations of water to cement ratios and unit water contents in recycled concrete with recycled fine aggregate replacement of 100 percent are discussed by the test results, such as air content, slump, time of set, compressive strength, tensile strength, carbonation, chloride penetration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.103-110
• /
• 2015

This paper planned for the adjustment of unified control points by compared adjusted software for integrated network and the national integrated network. There may be some errors in the survey date and interpretation of data processing due to applying different software each year. To minimize errors, we performed a precision network adjustment by consolidating control points per observation session over years. Prior to perform the integrated network adjustment with the GPS analysis program (GLOBK) for the final integrated network adjustment, the Quasi-Observation Combination Analysis(QOCA), the Global Kalman filter VLBI and the GLOBK were compared and analyzed to perform an integrated network adjustment. The integrated network adjustment result indicates that the RMSE was rather big with ±0.03m along the vertical axis, but ±0.006m along the horizontal, that is not much different from the existing result.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.86-92
• /
• 2003

To analyze the characteristics of ozone formation, measurements of the concentrations of individual exhaust hydrocarbon species have been made under various engine operating parameters in a 2-liter 4-cylinder engine for natural gas and LPG. Tests were performed at constant engine speed, 1800 rpm for two compression ratios of 8.6 and 10.6, with various operating parameters, such as excess air ratio of 1.0~1.6, bmep of 250~800 na and spark timing of BTDC 10~$55^{\circ}$. It was found that the natural gas gave the less ozone formation than LPG in various operating conditions. This was accomplished by reducing the emissions of propylene($C_3H_6$), which has relatively high maximum incremental reactivity factor, and propane($C_3H_8$) that originally has large portion of LPG. In addition, the natural gas show lower values in the specific reactivity and brake specific reactivity. Higher compression ratio of the test engine showed higher non methane HC emissions. However, specific reactivity value decreased since fuel species of HC emissions increase. brake specific reactivity showed almost same values under high bmep, over 500kPa for both fuels. This means that the increase of non methane HC emissions and the decrease of specific reactivity with higher bmep affect each other simultaneously. With advanced spark timing, brake specific reactivity values of LPG were increased while those of natural gas showed almost constant values.

• Journal of KIISE:Software and Applications
• /
• v.36 no.11
• /
• pp.891-900
• /
• 2009

The priority of software maintenance researches has been increasing, since the lengths of software lifecycle are more increasing. Measuring couplings among software entities provides a good quantitative source for analyzing source code and point out candidate refactoring positions. Logical-coupling measures how strongly two software entities are related with each other from the evolutionary point of view. The researches on logical-coupling have been focusing on improving the correctness and explaining more aspects that are hiding by measuring logical-coupling among finer-grained entities. However, existing researches on logical-coupling fails to consider characteristics of developers and projects reflected in transactions. The research proposes a logical-coupling measurement method based on transaction time, size and expertise of developer to improve the correctness by considering characteristics of developers and projects reflected in transactions. The method has been validated by applying it to three open-source projects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4943-4952
• /
• 2013

This study was conducted among Korean women over aged 60 who participated in Korea National Health and Nutrition Examination Survey (KNHANES) (the 2nd and 3rd year at the 4th survey, and the 1st year at the 5th survey). The purpose of the study was to figure out a relation between femoral neck and lumbar spine bone mineral density and anthropometry, life style, diet, fracture history, family history of osteoporosis, medical history, menstrual history and reproductive factor. To express the strength of the associations, percent differences were calculated from multiple linear regression models using the formula ${\beta}{\times}$(unit/mean BMD). Unit for continuous variables were chosen to approximate 1 standard deviation(SD). In women aged 60 or older, lean mass(B: 0.257) and fat mass(B: 0.237) greatly influenced bone density in the femoral neck and lumbar spine. Therefore it will be an effective way to prevent osteoporosis for elderly women by increasing lean mass and maintaining proper weight.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.1
• /
• pp.1-13
• /
• 2009

Flash memory is widely used as a storage medium of mobile devices such as MP3 players, cellular phones and digital cameras due to its tiny size, low power consumption and shock resistant characteristics. Currently, there are many studies to replace HDD with flash memory because of its numerous strong points. To use flash memory as a storage medium, FTL(Flash Translation Layer) is required since flash memory has erase-before-write constraints and sizes of read/write unit and erase unit are different from each other. Recently, new type of flash memory called "large block flash memory" is introduced. The large block flash memory has different physical structure and characteristics from previous flash memory. So existing FTLs are not efficiently operated on large block flash memory. In this paper, we propose an efficient FTL for large block flash memory based on FAST(Fully Associative Sector Translation) scheme and page-level mapping on data blocks.