• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.996-1000
• /
• 2009

물순환계를 종합적으로 관리하기 위해서는 물순환계의 모니터링과 해석모형의 구축이 필요하다. 실측자료만으로는 복잡 다양한 물순환계 구조 및 인과관계를 규명할 수 없기 때문에 시간적 공간적으로 변화하는 다양한 수문현상을 일관된 하나의 시스템으로 이해하기 위해 물순환 해석모델을 구축하여 검토할 필요가 있다. CAT(Catchment hydrologic cycle Analysis Tool)은 수문학적으로 균일하게 판단되는 범위를 소유역으로 분할하여 지형학적 요인에 의한 유출 특성을 객관적으로 반영할 수 있게 하며, 토양층에 따라 침투, 증발, 지하수 흐름 등의 모의가 가능하도록 하는 Link-Node 모형으로, 증발산은 기준 증발산을 외부에서 직접 입력하거나, Penman-Monteith 방법을 선택할 수 있으며, 침투는 토양의 수리전도도에 따른 연직방향 침투 및 사면방향 복귀류를 고려할 수 있다. 노드의 지하수 유거를 고려하여 기존 노드-링크 방식 모형의 장기 유출 해석시 제한점을 보완하였으며, Muskingum, Muskingum-Cunge, Kinematic wave 방법을 이용하여 하도추적을 모의할 수 있다. 또한 GUI를 통해 사용자가 손쉽게 모형을 적용하고 관리 할 수 있도록 하고, 여러 시나리오를 적용함에 있어서 편리하도록 개발 중인 모형이다. 본 연구에서는 개발중인 CAT 모형을 평가 하기위해 시험 유역으로 운영 중인 설마천 유역에 적용하여 소유역 분할(노드수), 계산 시간 간격(일/시단위) 등에 따른 적용성을 평가하였다. 관측 자료를 통해 구축 가능한 물리적 매개변수를 통해 해당 유역을 단일 노드 및 다중 노드로 간단히 모형화할 수 있었으며, 모의 결과, 관측 유량과 적절히 일치하는 결과를 얻을 수 있었다. 1시간 단위에 대한 모의에서도 유출을 적절히 모의할 수 있었으며, 소규모 유역에 대한 정밀한 물순환 해석이 가능할 것으로 평가되었다.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.44-52
• /
• 1996

Acoustical characteristics of internal pipe structures and a loudspeaker of the thermoacoustic refrigerator are analyzed by using the transfer matrix method. The resonator system is dismantled into verious basic acoustic elements, and then linearized transfer matrices are serially combined with the dynamical system of linearized loudspeaker model, that the total system of thermoacoustic refrigerator can be analyzed in terms of frequency characteristics and acoustic field shape. Additionally, by using equations for energy flow through the capillary stack, the temperature distribution over the stack is numerically estimated. After expressing the acoustic work flow, thermoacoustic flow, and energy loss per unit length in a single capillary duct by using the transverse functional variations, overall energy flow rate and energy balance are obtained for the whole capillary stack. The final expression for energy flow through the stack is numerically evaluated by varying physical parameters obtained from the sound field analysis. After confirming good agreements between predicted and experimental results for the interior sound field of a refrigerator model, the thermoacoustic characteristics of Hofler's apparatus is analyzed by the proposed method and it is observed that the results agree well with Hofler's experimental results.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.66-74
• /
• 2001

Plate bending process is indispensible in shipbuilding. The process includes press bending process and heating process. Especially the heating process is carried out exclusively by skillful workers. Many researches have been made to automate the heating process. This study was carried out as a fundamental study to develop a efficient analysis method for triangle heating and focused on clarifying the deformation characteristics of plate by triangle heating and essential elements effect on the deformation. In this paper, we proposed an analysis model for thermal-elastic-plastic analysis and simulated the deformation by triangle heating using ANSYS based on the experimental results of Jang et al.(2001). Also, we showed the deformation characteristics more clearly by comparing the deformation due to triangle heating and line heating in case that the total heat input is same. Finally, we investigated the change characteristics of deformation elements according to the volumetric heat input.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.533-538
• /
• 2004

This paper proposes a systematic method to develop short-term electrical load forecasting systems using neuro-fuzzy models. The proposed system predicts the electrical loads with the lead times of 1 hour, 24 hour, and 168 hour. To do so, the load forecasting system first builds an initial structure off-line for each hour of four day types and then stores the resultant initial structures in the initial structure bank. 96 initial structures are constructed for each prediction lead time. Whenever a prediction needs to be made, the proposed system initializes the neuro-fuzzy model with the appropriate initial structure stored and trains the initialized prediction modell. To improve the performance of the prediction system in terms of accuracy and reliability at the same time, the prediction model employs only two inputs. It makes possible to interpret the fuzzy rules to be learned. In order to demonstrate the viability of the proposed method, we develop a load forecasting system by using the real load data collected during 1996 and 1997 at KEPCO. Simulation results reveal that the prediction system developed in this paper can achieve a remarkable improvement on both accuracy and reliability

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.111-121
• /
• 2007

Diagnosis and Prediction of urban industrial structure is a key subject for establishment of sustainable urban development plan. By this time, studies of industry-related urban spatial structure have been concentrated on measurement of space distribution by industry type mainly using data about urban industries or total worker numbers. Now, status of workers become an important issue so this study analyzed qualitative change of urban industrial structure in the view of space using work status classification system. For that, data for work status in 1994 and 2004 were collected in towns and villages, and space analysis units were coincided based on change data between 1994 and 2004. Then, it analyzed spatial distribution pattern of employment through qualitative standard called work status using GIS. The analysis results by work status type of Busan industrial structure in GIS circumstance were as below. First, traditional labor intensive industries met a limit and service and wholesale/retail sale industries went to be poor livelihood. Therefore, Busan's employment rate should be decreased and worker numbers were statistically increased, however, irregular and non-wage workers were suddenly increased. So, it was determined that the quality of employment in Busan area came down. Second, a traditional downtown area has dwindled; on the other hand, employment has been increased in new town or new industrial complex and in the area developed services rather than the manufacturing industry. It is expected that the result of this study may be meaningful as data to prepare for longterm industrial development plan through qualitative evaluation called work status as well as to make behavior pattern of industrial structure which is basis of urban development.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.621-627
• /
• 1994

Two crystal structures of dehydrated, $Ag^{+}$ and $Ca^{2+}$-exchanged zeolite A treated at $250^{\circ}C$ with 0.15 torr of Cs vapor have been determined by single-crystal X-ray diffraction technique in the cubic space group $Pm{\bar\3m$ at $21(1)^{\circ}C$ (a = 12.344(2) $\AA$ and 12.304(2) $\AA$). Their structures were refined to the final error indices, R (weighted), of 0.091 with 180 reflections, and 0.093 with 179 reflections, respectively, for which I > $3\sigma(I).$ In each structure, Cs species are found at four different crystallographic sites: 3 $Cs^{+}$ ions per unit cell are located at 8-ring centers, ca. 6.81∼7.14 $Cs^{+}$ ions are found on opposite 6-rings on threefold axes in the large cavity, ca. 1.93∼2.03 $Cs^{+}$ ions are found on threefold axes in the sodalite unit, and 0.53∼0.66 $Cs^{+}$ ions lie on opposite 4-rings. Also, ca. 4.12∼4.27 Ag atoms are located near the center of the large cavity. In these structures, excess cesium atoms in a unit cell are associated with other $Cs^{+}$ ions on a single threefold axis to form the linear cationic cluster $(Cs_4)^{3+}$. By blocking 8-rings, the $Cs^{+}$ ions may have prevented silver atoms from migrating out of the structure. The Ag atoms are likely to have formed hexasilver clusters at the centers of the large cavities. Each hexasilver cluster is stabilized by coordination to 14 $Cs^{+}$ ions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.91-98
• /
• 1989

The analysis of a single stereo model is not sufficient in applying for some large structures, therefore the precise coordinate analysis photogrammetric block adjustment method should be considered. The distribution of control points has a great influence on the error characteristics of the block adjustment results. Thus, the unit model method is applied to the photogrammentric adjustment procedure to study error characterestics with different distributions of control points. Through this study, the second order polynomial equations about bridging distance and plane error are developed in block adjustment of terrestrial photogrammetry. Comparing the block adjustment method and a single model method, root mean square error of the block adjustment method is 0.44mm, and a single model method is 1.06mm.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.57-64
• /
• 2012

Although the APU combustors were developed successfully, it could face many unexpected hardships in an engine or a system operating under the severe environments. But, it is not easy to change the combustion field or combustor structure at the engine/system development stage. So we must suggest practical ways to optimize the value quantitatively by engine test and flow analysis, and verify those by the cyclic test. This paper describes reverse-annular type combustor troubleshooting processes for verifying and settling of the problems and issues occurred in various engine and system operation tests by experiment and analysis.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.261-274
• /
• 1998

The brief results of laboratory and field tests of yieldable steel arches are represented. The test supports were fabricated with three U-sectional beams which are 25.8 kg/m of Glocken profile. The structural analyses of semi-circular and arch supports were conducted to find out shape factor of U beam to be 1.35 and the location of 2nd plastic hinges. Load capacity of arch supports under crown loading were examined as a function of leg length. Yieldable characheristics of test supports were investigated with various bolting torque of connection part. Determination method of bolting torque were also studied. Finally, test supports were installed in-situ with torque of 21 kg .m, which showed a typical yielding procedure.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.655-664
• /
• 2018

Retina transforms the external light into electrical signal that stimulates visual cortex of the brain. Electrical modeling of the retina is useful to understand its structure and action that is a prerequisite to implement the retina as a hardware device. This paper introduces a 2-D electrical network model of vertebrate's retina considering signal pathway of retinal cells and synapses. We implemented a simulator of the retina based on the electrical network model to analyze its operation under various circumstances. Compared to the prior studies, It might contribute designing of artificial retina device in terms of that this study specifically observed input and output reactions of each cell and synapse node under various light intensity on the retina.