• Land and Housing Review
• /
• v.15 no.2
• /
• pp.29-37
• /
• 2024

This study investigates the thermal conductivity and density of expanded polystyrene insulation materials collected from buildings under going energy retrofit projects. Due to the absence of initial thermal conductivity data, determining precise long-term patterns was challenging. Analysis based on design documents revealed that expanded polystyrene insulation maintained consistent performance over ten years. Notably, the thermal conductivity measurements of insulation samples of the same grade and age varied significantly. Additionally, the insulation density was found to be substantially below the standard specified in the design documents. The results of the experiment indicate that performance management during both construction and operation phases is lacking. It is crucial to apply building commissioning, which involves performance verification throughout the building's life cycle, to properly evaluate building energy performance improvements, such as building energy retrofit projects.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1231-1237
• /
• 1989

본 연구에서는 이러한 단열해석상의 문제점을 해결하기 위한 하나의 방식이 광방법으로서 적절한 가정을 도입하여 단열모델에 대한 해석적인 근사해를 시도하였다. 실제조건에 부합하면서도 간편하며 경제적인 해석방법의 확립은 VM 사이클로 작동되는 냉동기에 대한 최적설계의 중요한 기초가 될 것이다. 해석모델의 정립, 종속변수에 대한 근사해, 성능평가에 필요한 열역학적량들을 종속변수의 해석적 함수형태로 표시하는 과정을 내용에 포함한다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.32 no.2
• /
• pp.28-39
• /
• 2003

1998년 4월 일본 공기조화.위생공학회 북해도지부 설비기술연구회에서는 실무레벨의 "외단열건물의 열부하계산법"을 위한 소위원회가 발족되었으며, 1999년 11월에 연구보고서가 완성되었다. 이에, 일본 학회에서는 건축설비기술자협회 북해도 지부와 공동으로 실무자를 대상으로 세미나를 2000년8월에 개최하였다. 본 내용은 위원회보고서와 세미나에 서 거론된 "외단열건물의 열부하특성과 계산법의 요점"을 제시하고 이에 근거한 최대부하의 합리적인 설계와 불가분의 관계가 있는 "외단열건물을 위한 난방과 냉방을 통일한 열부하계산법의 개념"을 소개함과 동시에 "실무자의 과제와 금후의 전망"에 대하여 언급하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1097-1103
• /
• 2012

There are many fish farms being cultivated in the southwestern cost of South Korea. Because the farms cultivating use the basic method that inflow and circulate sea-water, slight negligence and bad design cause major negative impact on fish deaths. Also, the optimal temperature for each specie of fishes has already been proven to differ on each specie. Maintaining this environment, regardless of seasons, is very difficult and that requires research to develop. In this paper, basic characteristics of heat and mechanism of heat transfer are studied. Based on this, Open-end water vessel is designed and constructed using sandwich-insulation panels and simulated to store the heat in certain isolated space. This study confirmed that it is possible to keep constant temperature by this method, in large areas of water where it is insulated by heat insulator. and equipped with heater in Open-end water vessel where the other part is heated. The AC power controller maintains the constant temperature required and the temperature controller detects and displays the temperature by using the micro-processor.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.595-601
• /
• 2016

The insulation performance of the insulation currently used in building structures is reflected only during design based on initial performance and the reduction in heat insulation performance due to the degradation of long-term durability is not reflected. This study reviewed the degradation of heat insulation performance due to the durability degradation of insulating materials through the accelerated durability test. The study findings showed that the foamed polystyrene insulation bead method did not show performance degradation due to aging in the standard environmental condition and laboratory accelerated test condition but the performance is degraded in the freeze-thaw test condition. On the other hand, in the case of the extrusion method, the degradation of the heat insulation performance was less in the freeze-thaw test condition, but the rapid performance degradation was caused by the release of the internal gas at the beginning of aging. In addition, the hard polyurethane foam insulation showed better initial insulation performance than other insulation materials, but the performance was found to be degraded somewhat under laboratory accelerated test conditions and freeze-thaw test conditions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.101-108
• /
• 2004

A 16-bit adiabatic ALU(arithmetic logic unit) is designed. A simplified four-phase clock generator is also designed to provide supply clocks for the adiabatic circuits. All the clock line charge on the capacitive interconnections is recovered to recycle energy. Adiabatic circuits are designed based on ECRL (efficient charge recovery logic) using a 0.35${\mu}{\textrm}{m}$ CMOS technology. The post-layout simulation results show that the power consumption of the adiabatic ALU including supply clock generator is reduced by a factor of 1.15-1.77 compared to the conventional CMOS ALU with the same structure.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.507-518
• /
• 2021

The application of an adhesive calcium carbonate-based hybrid insulation board with quasi-combustibility in the external thermal insulation composite system(ETICS) ensures effective thermal performance and fire safety. This study aimed to conduct a mechanical test of the quasi-non-combustible hybrid insulation board as well as its constituent materials to obtain the basic data for the structural design of the adhesive ETICS. Test specimens were fabricated based on domestic and foreign test standards to examine and evaluate their tensile, compressive, flexural, and shear strengths. The strength characteristics of the quasi-non-combustible hybrid insulation board were identified from the test results, which verified that the minimum required physical properties suggested by the current KS M ISO 4898 were met. Furthermore, the quasi-non-combustible ETICS used in this study was found to be suitable for use as an external insulation system for walls unless subjected to continuous gravity load, such as a heavy exterior finish.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.207-207
• /
• 2012

진공단열재는 폴리우레탄 폼 대비 10배 이상의 단열성능을 갖는 고효율 단열재로서 고차단성 필름 봉투 내부에 무기 소재를 진공감압시켜 대류에 의한 열전달을 최소화시킨 차세대 단열재이다. 특히 진공단열재에 있어 열전달의 경로는 전도에 의한 효과가 가장 크므로, 진공단열재 내부의 Glass Fiber 심재의 최적화 설계에 따라 단열 성능을 극대화 시킬 수 있다. 이에, 본 연구에서 GLass Fiber의 배열에 따른 성능 비교 평가를 통해, 전도의 특성을 최소화 시킬 수 있는 Glass Fiber의 배열 및 다층 적층 구조를 통해 성능 개선 효과를 고찰 하였다.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.128-134
• /
• 2002

Outer surfaces of KSR-III are insulated to protect outer structure and inner payloads from the aerodynamic heating. The characteristics of insulation material (BMS 10-102), selected through careful tests and thermal analyses, are low heat transfer rate and low density. It is applied in a wet and continuous spray pattern for outer surfaces of KSR-III. In the present study, the honeycomb sandwich structure of nose fairing, which is one of the typical multi-layer structures of KSR-III, is thermally analyzed with insulation.

• The Magazine for Energy Service Companies
• /
• s.64
• /
• pp.14-17
• /
• 2010

친환경 건축물은 자연친화적인 건물을 실현해 사용에너지를 최소화하고 탄소배출을 줄이는 것을 목표로 한다. 에너지사용을 먼저 줄인 후 그 다음 신재생에너지로 필요한 에너지를 충당해야 한다는 것. 때문에 친환경 건축 설계기법으로 최적향 선택과 에너지효율화를 높일 수 있는 외피시스템, 고성능 단열재, 고 단열 창호, 폐열회수환기시스템 등이 거론되고 있다. 친환경 건축의 바른 길을 위해 숙지해야 할 요소를 짚어보았다.