• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.25-26
• /
• 2015

최근 전 세계적으로 강화되고 있는 환경규제와 고유가 문제에 대응 하기 위해 자동차 산업은 내연기관에서 전기시스템으로 기술적 패러다임이 변하고 있다. 본 논문에서는 인버터와 SRT방식의 양방향 DC/DC컨버터를 이용한 V2G를 위한 새로운 양방향 OBC Topology를 제안한다. 분산전력망 사업 상용화시 적시 적용 가능한 높은 효율의 양방향 OBC Topology를 개발하고 배터리 전력을 입력원으로 분산형 전력공급 장치에서 요구하는 품질을 만족하는 전력 생산을 위한 단상 인버터 제어 기술을 제안한다. 또 한 디지털제어기를 통해 주파수 제어 및 정 전류, 정 전압 제어 기법을 사용하여 양방향 전력전송을 제어하며 역방향 전송시 Voltage-doubler형태로 변경하여 역방향 동작을 가능케 하는 방식을 제안한다.

• 전자공학회논문지SC
• /
• 제44권6호
• /
• pp.57-65
• /
• 2007

본 논문에서는 DSP(TMS320F2812)를 사용하여 단상 역률개선을 디지털로 설계하였다. 이러한 승압형 역률개선 컨버터를 디지털로 구현하기 위하여 DSP는 컨버터의 입력전압과 인덕터전류, 컨버터의 출력전압이 필요하며 이를 DSP 내부에 있는 12비트 A/D변환기로 구현하였다. 승압을 위한 스위칭소자인 FET가 ON/OFF 될 때 심한 고주파 노이즈와 스위칭 리플이 발생한다. DSP에 의해 구현시 어느 시점에서 A/D 변환을 시작할지 결정하는 것은 대단히 중요하며 스위칭 노이즈가 발생하지 않는 곳에서 A/D 변환을 할 필요가 있다. PWM의 시비율(duty ratio)은 약 5 %에서 95 %까지 가변적이기 때문에 A/D 변환의 고정된 시작점을 찾을 수는 없다. 따라서 본 논문에서는 25 us 마다 PWM의 ON/OFF 폭을 미리 예측한 후 타이머를 이용하여 A/D 변환을 하도록 하였다. 실험 결과들로부터 광범위한 입력전압에 대하여 약 0.99의 역률과 80 Vdc 출력 전압에 대한 리플이 약 5 Vpp임을 확인하였다. 또한 윈도우즈 Xp 환경 하에서 수행되는 응용프로그램을 작성하여 원격에서 단상 PFC 컨버터의 각종 파라미터들과 전압 및 전류 제어기의 이득들을 모니터링하며 원격제어가 가능함을 보여 상용화의 가능성과 유용성을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.447-449
• /
• 1994

This paper deals with the static characteristics of filters at the AC source in single phase PWM converter using hysterisis current control method. The filters are needed to reduce the current harmonics. In general, there are two kinds of filters which can be used for current controlled PWM converter. One is the low pass filter, the other is the resonant filter for a frequency. This paper designs these filters by analysing the characteristics. And these filters are compared through performance index such as harmonic reduction factor and the value of components which make up filters.

• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.8-15
• /
• 2013

This paper proposes a DC-link voltage variation compensation method for a 3-level single phase converter for high-speed trains. Since 3-level NPC(Neutral Point Clamped) type converters have the split DC-link causing the inherent problem of voltage fluctuations in the upper and lower capacitors, reducing the voltage difference between the top and bottom capacitors is required. In this paper, compensation time proportional to the voltage difference is added to PWM switching time to solve the voltage variation. The compensation time is obtained by a PI controller. Simulation results demonstrate the validity of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.117-120
• /
• 1993

In this paper, a novel DC link voltage control scheme for a single-phase PWM converter is proposed. The main idea of the control scheme is eliminating the effect of dc link voltage harmonics by using power balance of input side and output side. With the proposed strategy, faster transient response than that of conventional method using low-pass filter can be obtained. In addition, a half period current control, based at equal switching frequency, is proposed. The validity of the proposed scheme is verified by simulation results for GTO PWM converter system.

• 수산해양교육연구
• /
• 제9권2호
• /
• pp.209-221
• /
• 1997

This paper presents a soft switching unity power factor PWM rectifier, which features reduced conduction losses and soft switching with no auxiliary switches. The soft switching are achieved by using a simple commutation circuit with no auxiliary switches, and reduced conduction loses are achieved by employing a single converter, instead of a typical front end diode rectifier followed by a boost rectifier. Furthermore, thanks to good features such as simple PWM control at constant frequency, low switch stress and low VAR rating of commutation circuits, it is suitable for high power applications. The principle of operation is explained in detail, and major characteristics analysis and experimental results of the new converter also included.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.630-633
• /
• 1997

This paper describes a design of a single phase PWM converter for high speed train. Parallel operation and control method of four Quadrant PWM converters are described. Simulation and modelling of the converters is performed. Capacity of the converter/inverter and power circuit for high speed traction system designed. And harmonic contents of AC line current's are analyzed. The results of the simulation are presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.5-9
• /
• 1998

In the high speed rail system, the distortion of the voltage and the current waveform of the input power line increases the power loss and make a several electro-magnetic problems such as EMI or the interference of the communication line. In this paper, the control scheme of the PWM converter to make a good power factor and to regulated the output voltage as well as to reduce the harmonic component of the input current is proposed. Also a control schem of the PWM converter in the parallel operation to reduce the harmonics of the input current is proposed

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권8호
• /
• pp.529-535
• /
• 2000

In this paper, a current control system of a single phase PWM AC/DC converter using a reduced-order Luenberger observer without source voltage sensors is proposed. The sinusoidal input current and unity input power factor are realised based on the estimated source voltage performed by the reduced-order Luenberger observer using actual currents and DC link voltage. The poles of the reduced-order Luenberger observer are placed in the left half plane of s-plane by the pole-placement method in order to acquire the stability of the observer. The magnitude and the phase of the estimated source voltage are used to accomplish the unity power factor. The proposed method is implemented by DSP(Digital Signal Processor). Experimental Results verify that the reduced-order observer estimates the source voltage without the estimation error and the control system accomplishes the unity power factor, and constant DC link voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.161-165
• /
• 2003

In this paper, A new controller for power factor and harmonics compensation of a single-phase PWM converter is described. The proposed controller requires only the dc voltage sensor and the at current sensor to compensate the power factor and harmonics. Detail simulation model with EMTBC (Electro-Magnetic Transient program for DC transmission) including power circuit and controller was developed to verify the operation of proposed controller. The application feasibility of the proposed controller was verified through experimental works with a prototype. The proposed controller has a simple structure in the point of hardware implementation, and shows excellent performance in normal operation as well as in sudden load change.