• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.11a
• /
• pp.516-518
• /
• 2006

생분해성 고분자 재료들은 지구환경 보호측면에서 다양한 분야, 즉, 1회용 재료, 농업용 필름 및 생체적합성 재료(약물 방출, 봉합사) 등에서 실용화되거나 활발한 연구가 진행되고 있다. 이들 재료의 상업적응용은 물성, 분해능, 제조가격, 대량생산 등에 의해 좌우 될 수 있다. 이들 중 특히, 분해 속도의 측정 및 조절은 본질적인 응용에서 가장 중요한 위치를 차지 하고 있다. 분해 속도의 규명 및 조절은 제품의 수명을 제어할 수 있고 응용분야를 넓힐 수 있다. 본 연구에서는 단분자 막장치를 이용하여 생분해성 고분자의 분해 속도 및 이성질체간의 complex 형성을 통한 분해속도의 제어를 연구하였다. complex의 형성은 분해성 고분자의 분해속도를 현저히 감소시키는 것으로 나타났다.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1424-1427
• /
• 1996

The pressure-area isotherm(${\pi}$-A isotherm) of 8A5H(4-octyl-4'-(5-Carboxyl-pentamethyleneoxy)-azobenzene) at the air/water interface were obtained. Using the Xe/Hg Xe 500w(93' model 68811), an activities of molecule at the air/water interface were certified. In addition, using a current-measuring technique, we investigated the abrupt changes of a current observed at the liquid-to-solid phase transition in a current-area (I-A) isotherm of a fatty acid monolayer at the air/water interface

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.343-348
• /
• 2007

The physical properties of DMPC monolayer were made for dielectric relaxation phenomena by the detection of the surface pressures and displacements current. Lipid thin films were deposited by accumulation and the current was measured after the electric bias across the manufactured MIM device. It is found that the phospolipid monolayer of dielectric relaxation takes a little time and depend on the molecular area. When electric bias is applied across the manufactured MIM device by the deposition condition of phospolipid mono-layer, it wasn't breakdown when the higher electric field to impress by increase of deposition layers.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.3
• /
• pp.107-110
• /
• 2006

We fabricated the monolayers onto QCM by self-assembly using viologen, which has been widely used as electron acceptor. A gold electrode of the QCM was cleaned by piranha solution and prepared the ethanol-acetonitrile(1:1) solution with 2 m mol/l viololgen compounding of pure hi gas. We determined the time dependence to resonant frequency shift during self-assembly process and the electrochemical behavior of the self-assembled viologen monolayers by cyclic voltammetry. With increasing scan rate, the redox peak current of the viologen increased linearly. This was signified that the redox reaction was reversible. The EQCM measurements revealed the anions transfer during redox reactions, respectively. From the EQCM data, the well-defined shape peaks were nearly equal charges by cyclic voltammetry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.38-42
• /
• 1996

The pressure-area isotherm of monolayer at the air-water interface were obtained and the LB films were fabricated onto a quartz slides and quartz crystal by conventional Langmuir-Blodggett(LB) method. The UV absorption spectra of Langmuir-Blodggett(LB) film on quartz slides and spectrum of monolayer formed on quartz crystal have been measured. The photoisomerization of the long-chain fatty avid containing azobenzene were obtained by the application of UV and visible light. The reversibility of photoisomerization were more clear difference when the number of C$\_$n/ increased. At the pressure-area isotherms, the value of surface pressure increment were decreased when the number of C$\_$n/ increased, A surface pressure of 20mN/m was obtained as a proper one for a film deposition. The photoisomerization at LB films were also obtained by application of UV and visible light. So the LB film of long-chain fatty acid containing azobenzene has possibility to being applies to functional molecular devices such as photomemory and light switching.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.496-500
• /
• 2003

Molecular self-assembled of surfactant viologen are of recent interest because they can from functional electrodes as well as micellar assemblies, which can be profitably utilized for display devices, photoelectrochemical studies and electrocatalysis as electron acceptor or electron mediator. Fromherz et al studied the self-assembly of thiol and disulfide derivatives of viologens bearing long n-alkyl chains on Au electrode surface[1]. The electrochemical behavior of self-assembled viologen monolayer has been investigated with QCM, which has been known as nano-gram order mass detector. The self-assembly process of viologen was monitored using resonant frequency(ΔF) and resonant resistance(R). The redox process of viologen was observed with resonant frequency(ΔF).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.129-129
• /
• 2004

본 연구에서는 나노스케일 절삭가공(nanometric cutting process)시에 미세 팁과 가공표면사이에서 발생하는 현상들에 대하여 분자동역학적 시뮬레이션을 통하여 살펴보았다 본 연구의 목적은 실험적으로는 파악하기 어려운 극미세 가공에서 발생하는 나노트라이볼로지적 현상을 이해하고, 이를 토대로 기계적 가공에 기반하여 개발된 '기계-화학적 나노리소그래피(Mechano-Chemical Scanning Probe Lithography)' 공정을 개선, 발전시키는데 있다. 기계-화학적 나노리소그래피 기술은 극초박막의 리지스트(resist)를 미세탐침을 이용하여 기계적 가공으로 제거하고 이로인해 표면으로 드러난 모재부분을 화학적 에칭에 의해 추가로 가공하여 원하는 패턴형상을 얻어내는 기술이다.(중략)

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.458-460
• /
• 2000

We attempted to fabricate polyurethane derivatives (PU-CN, PU-DCM) LB films by using LB method. Also, we investigated the monolayer behavior at the air-water interface by surface pressure-area ($\pi$-A) isotherms. And, the surface morphologies and the physicochemical properties of LB films were investigated by atomic force microscopy (AFM) and UV-vis spectroscopy, respectively. Also, the electrical properties of polyurethane derivatives LB films were investigated by using the conductivity, the dielectric constant and activation energy. In the surface morphologies, physicochemical, electrical properties of polyurethane derivatives LB films, the properties is different as to the Polyurethane derivatives, it is considered that this phenomena could be described by the difference of lumophore pendant which was adhered at PU main chain.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.196-200
• /
• 2004

Using polyimide Langmuir-Blodgett(LB) films as a tunneling harrier, we fabricated Au/Polyimide/1-layer arachidic acid/Pb structure in order to investigate electron transport properties through a junction. It was found that 9-layer polyimide LB films function as a good tunneling harrier in a study of current-voltage(I-V) chararteristics. And several peaks originating in the vibrational modes of the constituent molecules of 1-layer arachidic acid LB films were clearly observed in d$^2$V/dI$^2$- V corves.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.10-11
• /
• 2006

The azobenzene dendrimer is one of the dendrimeric macromolecules that include the azo-group exhibiting a photochromic character. Due to the presence of the charge transfer element of the azo-group and its rod-shaped structure, these compounds are expected to have potential interest in electronics and photoelectronics, especially in nonlinear optics. In the present paper, we give pressure stimulation to organic thin films and detect the induced displacement current. Functional photoisometrization organic molecular the photo-stimulus to organic monomolecular L films and LB films of dendrimer and SASH were performed. The SASH organic monolayer in case of pressure stimulus occurred that positive course but in case of the photo-stimulus compared positive and negative. It is assumed that generation forms of displacement current were measured when photo-stimulus for impression.