• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1021-1026
• /
• 2012

The transient mass transfer in a single droplet system consisting of 1-octanol (continuous phase)/aqueous succinic acid solution (dispersed phase) was investigated in the presence of chemical reaction, which is acid/anion exchange reaction of succinic acid and tri-n-octylamine (TOA). This succinic acid extraction by TOA can be considered to occur at the interface between organic and aqueous phase, that is, heterogeneous reaction system. The basic properties of the system such as viscosity, density, distribution coefficient, terminal velocity of droplet, and diffusion coefficient were measured experimentally or calculated theoretically, and used for theoretical calculation of characteristic parameters of mass transfer later. The effects of succinic acid concentration on the terminal velocity was negligible in the existence of TOA, although the terminal velocity increases with succinic acid concentration in the absence of TOA. On the contrary, the terminal velocity decreases with TOA concentration. While droplets falls through organic phase, the trajectory of droplets is observed to oscillate around its vertical path. A mass trnasfer cell was prepared to monitor the mass transfer behavior in a single droplet and used to measure the mean concentration of succinic acid inside droplet. The results are expressed with dimensionless parameters. Under 50 g/L succinic acid condition, the system with 0.1 mol/kg TOA showed that the molar flux decreases in proportion to the decrease of concentration gradient, while in the case of 0.5 mol/kg TOA Sh increases rapidly with time indicating the molar flux of succinic acid decreases relatively slowly compared to the decrease in concentration gradient.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.366-373
• /
• 2013

This paper discusses the singly curved phased reflector for reduced RCS pattern, which has minimized RCS level at boresight with a null by phase cancelation and the lowered RCS level of main beam by splitting the main beam into multi directions. Considering the reduced level of boresight and main beam compared to the same sized reference PEC, this proposed multi-beam reflector can be adopted in the mono-static radar and the bi-static radar environment. The proposed reflector is a multi-beam reflector, which has different phase distributions at each row for different steering angle. It is designed through an intermediate stage of a single and dual-beam reflector. The behaviors of the designed reflectors are verified through full-wave simulation and experiment. The reflectors are designed in the frequency of 10 GHz and it has a size $240{\times}180mm^2$($8{\times}6\;{\lambda}^2$) with the curvature k=3.3. From the measured results, the proposed reflectors reduce the reflected power by 17 dB at boresight.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.215-224
• /
• 2013

With the rising popularity of smart-phones, the supply of Internet protocol television is largely increased and it causes the wireless communication network load to be increased. To overcome such an overloading problem, 3GPP is now working on the standardization of MBMS since LTE Release 6 specification. MBMS has good performance in bandwidth efficiency by sharing the same bandwidth with the mulitple MBMS users having the same content. According to the proposed algorithm, in heterogeneous networks having a dispersed Single-cell MBMS where 3GPP network and Wi-Fi network are mixed, if the number of MBMS users, who are belonging to cells supporting a dispersed Single-cell MBMS, is more than a specified threshold, the MBMS priority policy is operated. Otherwise, the Wi-Fi priority policy is executed. As the simulation results show both the increase of total available bandwidth ratio and the decrease of network usage cost, it is confirmed that the proposed scheme allows the network efficiency to be maximized.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.337-344
• /
• 2006

The objective of this study was to compare of genetic parameter estimates on carcass traits of Hanwoo(Korean Cattle) according to modeling with Gibbs sampler and MTDFREML. The data set consisted of 1,941 cattle records with 23,058 animals in pedigree files at Hanwoo Improvement Center. The variance and covariance among carcass traits were estimated via Gibbs sampler and MTDFREML algorithms. The carcass traits considered in this study were longissimus dorsi area, backfat thickness, and marbling score. Genetic parameter estimates using Gibbs sampler and MTDFREML from single-trait analysis were similar with those from multiple-trait analysis. The estimated heritabilities using Gibbs sampler were .52～.54, .54 ～.59, and .42～.44 for carcass traits. The estimated heritabilities using MTDFREML were .41, .52～.53, and .31～.32 for carcass traits. The estimated genetic correlation using Gibbs sampler and MTDFREML of LDA between BF and MS were negatively correlated as .34～.36, .23～.37. Otherwise, genetic correlation between BF and MS was positive genetic correlation as .36～.44. The correlations of breeding value for marbling score between via MTDFREML and via Gibbs sampler were 0.989, 0.996 and 0.985 for LDA, BF and MS respectively.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.2
• /
• pp.60-69
• /
• 1998

This paper proposes a speech synthesis method using Fuzzy VQ, and then study how to make choice of fuzziness value which optimizes (controls) the performance of FVQ in order to obtain the synthesized speech which is closer to the original speech. When FVQ is used to synthesize a speech, analysis stage generates membership function values which represents the degree to which an input speech pattern matches each speech patterns in codebook, and synthesis stage reproduces a synthesized speech, using membership function values which is obtained in analysis stage, fuzziness value, and fuzzy-c-means operation. By comparsion of the performance of the FVQ and VQ synthesizer with simmulation, we show that, although the FVQ codebook size is half of a VQ codebook size, the performance of FVQ is almost equal to that of VQ. This results imply that, when Fuzzy VQ is used to obtain the same performance with that of VQ in speech synthesis, we can reduce by half of memory size at a codebook storage. And then we have found that, for the optimized FVQ with maximum SQNR in synthesized speech, the fuzziness value should be small when the variance of analysis frame is relatively large, while fuzziness value should be large, when it is small. As a results of comparsion of the speeches synthesized by VQ and FVQ in their spectrogram of frequency domain, we have found that spectrum bands(formant frequency and pitch frequency) of FVQ synthesized speech are closer to the original speech than those using VQ.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.353-359
• /
• 2021

The Army is constructing a training system using Miles equipment that applies the latest science and technology to carry out military training. The Miles training system is a system that uses Miles equipment to simulate the damage situation of combat personnel and equipment in the same way as an actual battlefield by conducting practiced maneuvers in the field. Through this, the training force can experience conditions similar to an actual battle. In particular, the training effects of the warriors participating in the training can be maximized by establishing an integrated system that utilizes cutting-edge science technologies, such as information communication and computer simulation. This study analyzed the effects of Miles training in the army using scientific techniques targeted at the mid-range Miles. In particular, the effect index for analyzing the training effect was derived from a literature survey and expert opinions. The weight of each effect index was calculated by applying the Swing method. The final training effect was calculated by combining the results of the survey from train-experienced people. The Miles training effect was 2.6 times more effective than previous training without using Miles, and the satisfaction rate with Miles training according to status was high through variance analysis, and the difference was statistically significant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.594-601
• /
• 2019

A true MSEW abutment is an abutment type that directly supports the load of a superstructure. Metal strips, which are in-extensile reinforcements, should be used to minimize abutment deformation. A study to derive the application conditions of a True MSEW abutment was carried out by Zevogolis(2007). As a result, the pullout factor of safety of the uppermost reinforcement was estimated to be the smallest. Therefore, the pullout factor of safety of the uppermost reinforcement is the most important design factor. Parameter analysis was conducted with the abutment length, abutment heel, and abutment height as variables. The pullout factor of safety increased with increasing abutment length and abutment heel length. This is because the contact area increases and the superstructure is dispersed as the abutment length and abutment heel length increase. The pullout factor of safety converges at an abutment length of 1.2m and an abutment heel length of 0.9m. This is because the effective length of the reinforcement is reduced due to the increase in contact area. On the other hand, the extension of the superstructure will increase if the abutment length and abutment heel length are increased excessively. In addition, earth-volume is increased if the abutment height increases excessively. This acts as an upper load on the MSE wall. Therefore, it needs to be examined carefully.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.77-82
• /
• 2002

IDS has been studied mainly in the field of the detection decision and collecting of audit data. The detection decision should decide whether successive behaviors are intrusions or not , the collecting of audit data needs ability that collects precisely data for intrusion decision. Artificial methods such as rule based system and neural network are recently introduced in order to solve this problem. However, these methods have simple host structures and defects that can't detect changed new intrusion patterns. So, we propose the method using data mining that can retrieve and estimate the patterns and retrieval of user's behavior in the distributed different hosts.

• Journal of the Korean Geographical Society
• /
• v.34 no.5
• /
• pp.473-491
• /
• 1999

세균성 이질은 국내 제1종 법정 전염병으로 분류되어 관리되고 있는 질환으로서 1998년 이후 그 발병 사례가 급속히 증가하고 있다. 본 연구는 1999년 3월 부산시 사상구에서 집단 발병한 세균성 이질을 대상으로 하여, 각 환자들의 발병 시점과 장소의 분포패턴에 대한 지리학적 고찰을 목적으로 한다. 환자분포의 특징적 공간패턴과 그들의 시계열적 확산 양상 등을 탐색하기 위한 방법론은 보건지리학과 지도학 및 공간통계학에 기반을 둔 공간분석기법을 중심으로 설정하였다. 분석자료는 해당 지역의 수치지형도, 지적도, 인구 센서스 자료를 포함한 GIS 데이터베이스로 구축되었다. 인구분포를 감안한 밀도구분도를 바탕으로 개별환자의 위치자료와 동 단위로 집계된 자료를 자료의 형태에 따라 분석기법을 달리하였으며, 환자 발생 밀도, 상대적 위험지수 등을 지도화하여 역학자료의 시각적 통계적 분석을 수행하였다. 환자분포의 공간적 중심위치와 분산의 변화 등 기술적 통계분석과 함께 제1차 공간속성을 커널추정법으로 찾아보았다. 이와 더불어 ‘공간적 의존성’과 관련된 제2차 공간속성은 K-함수와 시뮬레이션을 통해 분석하여 군집성 등이 통계적으로 확인되었다. 본 연구를 통해 역학조사시 GIS의 활용사례가 제시되었으며, 모집단 인구를 고려한 확률지도 작성 기법과 다양한 데이터 가시화 방법, 그리고 시계열별 발생 환자들의 지리적 변이를 분석 하는데 따르는 문제들이 논의되었다.

• The Korean Journal of Applied Statistics
• /
• v.14 no.1
• /
• pp.111-120
• /
• 2001

Either systematic sampling or stratified sampling is usually applied to the business conditions survey when companies don't have much difference in their size. But the cutoff systematic sampling is an efficient method when only a few companies are so large that the total of them almost equals to the total of whole companies. Throughout this paper, three estimators of total and their variance estimations depending on three kinds of sampling schemes are discussed, and are compared with them via their variances. It is proved that the cut-off systematic sampling is most efficient by using a real data of the logging business conditions survey.