초음속 항공기를 설계하는데 있어서 일반적인 항공기와는 다른 성능이 요구되는데 그것은 바로 초음속에 의한 충격파가 발생시키는 추가적인 항력을 감소시키는 일이다. 날개의 Airfoil 형상을 결정하기 위해서는 공력 특성을 파악해야 하는데, 이를 알아보는 데 있어서 EDISON_CFD를 사용하였다. 충격파의 생성을 지연시키는 Supercritical Airfoil의 여러 형상에 필요한 격자를 생성하여 비점성, 압축성 유동 해석을 수행하였다. 비교에 필요한 다섯 개의 NASA Supercritical Airfoil을 선정하여, 아음속과 초음속으로 나누어 받음각에 따른 양력계수와 항력계수를 도출하고, 이를 토대로 양항비를 추정해 보았다. 추려진 것 중 가장 우수한 공력성능을 보이는 airfoil을 선정하였는데 그 결과 NASA SC-0403 airfoil의 공력 성능이 가장 뛰어나 그것을 선정하기로 하였고, 또한 2차원 공력 해석에서 얻은 양력계수를 면적에 대하여 적분하여 날개에서의 양력과 항력을 추정하였다.
세일링 요트 (sailing yacht)는 세일 (sail)의 양력을 주로 이용하여 추진력을 얻는다. 요트 경주에서와 같이 항주 속도가 중요한 문제에서는 세일의 성능이 좋을수록 빠른 속도를 낼 수 있기 때문에 세일 주변의 유동해석을 통한 성능 추정과 효율의 최적화는 매우 중요하다. 본 논문에서는 일반적인 경주요트의 형태로써 지브 세일 (jib sail)과 메인 세일 (main sail) 그리고 한 개의 마스트(mast)로 구성된 슬루프(sloop)형 요트에 대한 유동해석을 하였다. 풍상범주 상태에서의 30ft급 세일링 요트인 KORDY-30의 jib sail과 main sail의 높이에 따른 단면을 모델링하였다. 슬루프형 요트의 경우, 세일링 요트에서 jib sail과 main sail이 각각 단독으로 있는 형태의 요트보다 세일의 개수가 증가함에 따라 양력이 증가하지만 항력도 따라서 증가 할 것이라고 가정했다. 따라서 jib sail의 각도를 다양하게 변화시켜 양력계수와, 항력계수의 변화를 살펴보고 그에 따른 양항비의 분석을 통해 최적의 효율을 갖는 jib sail의 각도를 알아보았다.
선행 연구에서 블레이드 뒷전에 탄성 플랩이 장착되면 받음각에 따라 양력의 증가가 항력의 증가보다 상대적으로 더 커지게 되어 전체적인 양항비(앙력과 항력의 비)가 증가하는 것을 확인하였다. 본 논문에서는 선행의 연구를 참조하여 플랩의 길이가 변함에 따라서 양력과 항력의 변화를 비교하였다. 블레이드의 종류와 플랩의 제원은 현재 이용되는 수직축 풍력 발전기의 제품과 동일하게 사용하였다. EDISON_CFD와 MIDAS_IT를 이용하여 플랩이 장착된 블레이드 주변의 유체 유동을 해석하고, 플랩의 상하변위를 계산하였다. 이 과정을 반복 수행하여 플랩의 거동을 분석하고 플랩의 길이와 받음각에 따른 양항비를 비교하여 이전보다 효율적인 플랩을 설계하였다.
A study has been done on the three dimensional turbulent flow characteristic near the porous wall. The porous holes are considered by penetrating the wall in regular arrangement, and porosity is controlled by diameter of holes. Flow characteristics near the three dimensional porous wall are compared with field test results and self-generated experimental results. FLUENT is employed for computational analysis on the effect of three dimensional porosity with flow and pressure characteristics. As a result, drag coefficient is defined and compared for three dimensional effect. The drag coefficient is mostly a function of porosity, whereas the effect of Reynolds number is minimal, and its correlation is presented in terms of three dimensional porosity.
원형주상체 주위의 유동을 규명하기 위해 회류수조에서 원주방향으로 24개의 위치에 대하여 압력을 계측하였으며, laser sheet을 이용하여 유동을 가시화 하였다. Reynolds수가 4800에서 40000인 범위에 대하여 실험을 수행하였다. 또한, 원형단면체 주위의 비정상 층류유동에 대한 Navier-Stokes방정식의 해를 구하는 수치해석기법을 개발하였다. 효과적인 격자배치를 위하여 H와 O-type의 중첩격자를 사용하였고, 이산화 방법으로는 정규격자시스템에서 유한차분법을 적용하였다. 실험과 수치해석결과에서 뚜렷한 와류박리현상을 볼 수 있었으며, 압력계수 (C$_{p}$ ), 항력계수(C$_{D}$), 스트로얼수(St)를 정량적으로 비교하였을 때, 비교적 잘 일치하는 것을 확인하였다.다.
Proceedings of the Korea Water Resources Association Conference
/
2009.05a
/
pp.1-5
/
2009
하천의 수위와 유량에 대한 정확한 정보는 이수, 치수와 같은 수자원 관리에 있어서 가장 기본 물리량이며, 각종 물이용 분쟁 해결, 수공구조물의 설계, 하천의 유사량 산정 및 수리 수문모형의 개발, 검증을 위한 기초자료로 이용된다. 그러나 유량의 직접 계측은 많은 비용이 소요되며, 홍수시에는 계측이 불가능하다. 지속적인 유량자료의 실측은 얻는 것은 매우 어렵다. 따라서 최근 수치 모형을 이용하여 수위-유량 곡선을 예측하고자 하는 연구가 진행되고 있다. 본 연구에서는 복단면 및 불규칙한 하상을 갖는 개수로의 수위-유량 곡선 및 단위유량 예측모형을 개발하고자 한다. 수심 적분된 2차원 운동량 방정식으로부터 정상류와 등류 조건을 가정하여 지배방정식을 구성하였으며, Manning 조도계수를 사용하여 자갈 및 모래와 같은 하상재료에 의한 전단력을 산정한다. 또한 식생항력을 이용하여 홍수터 및 제방의 식생이 수위-유량에 미치는 영향을 분석하였다.
본 연구에서는 EDISON_CFD의 2D_YUIBM_1 해석자를 사용하여 선인장 단면 모양 실린더의 $C_D$를 가시의 개수(N)와 가시의 깊이(D)에 따른 경향성으로 나타내었다. 저 레이놀즈 수에 대한 유동 해석을 해야 하므로 레이놀즈 수 영역은 20(steady), 40(steady), 100(Unsteady)을 사용하였다. 또한, 특징적인 효과를 보이는 몇 개의 케이스를 선별해 그 모델들에서 $C_P$와 Vorticity의 분포를 조사했으며 이를 통해 저 레이놀즈 수의 선인장 모양 실린더에서 $C_D$의 변화 원인을 규명하였다. 마지막으로, 물체의 기하학적 성질과 유체의 성질을 기반으로 저 레이놀즈 수에서 $C_D$를 최적화하는 공식을 산출하였다.
Control of drag force on a circular cylinder using a detached splitter plate is numerically studied for laminar flow. A splitter plate with the same length as the cylinder diameter(d) is placed horizontally in the wake region. Its position is described by the gap ratio(G/d), where G represents the gap between the cylinder base point and the leading edge of the plate. The drag varies with the gap ratio; it has the minimum value at a certain gap ratio for each Reynolds number. The drag sharply increases past the optimum gap ratio; this seems to be related to the sudden change in the bubble size in the wake region. This trend is consistent with the experimental observation currently available in case of turbulent flow. It is also found that the net drag coefficient significantly depends on the variation of base suction coefficient.
Transactions of the Korean Society of Mechanical Engineers A
/
v.37
no.9
/
pp.1077-1082
/
2013
To improve cycling performance, the power output of the rider and the sources of resistance (e.g., air resistance, frame stiffness, and cycle mass) must be considered. From a mechanical viewpoint, we consider how the bike frame performance can be increased while decreasing the resistance. First, to improve the competitive ability of a racing track cycle, we should consider the stiffness of the bike frame including the pedal loading and aerodynamic effects when riding. Therefore, we obtained the cross-sectional area of each part of the bike frame and then aimed to minimize the drag force through an aerodynamic parametric study. In addition, the frame should remain safe under the loading applied by the rider. Under the guidelines of the UCI (union Cycliste Internationale) regulations, the bike frame has been evaluated under the proposed loading condition, and we developed a racing track cycle for elite cyclists.
KSCE Journal of Civil and Environmental Engineering Research
/
v.30
no.6B
/
pp.607-615
/
2010
Vegetation drag tends to raise water level by retarding the flow. Previous studies have focussed on either the vertical structure modeling or the one-dimensional modeling, which can hardly be used to simulate the vegetative streams in practical engineering. Therefore, this paper presents a two-dimensional numerical model based on the depth-averaged flow equations. Vegetation drags are reflected in the flow equations, assuming non-flexible rigid cylinders. For validations, flow properties measured in both rectangular and compound channels are compared with simulated data, showing good agreement. Then, the model is applied to a reach in the Han River and the impact of floodplain vegetation on the flow is investigated.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.