• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.170-187
• /
• 2020

Dolmens bearing the burial layout and stone coffin tombs of the late Bronze Age were excavated from Samdeok-ri, Goseong, Gyeonsangnsamdo, and grave items such as red-burnished pottery, arrowheads, and stone swords were also discovered. In the case of the red-burnished pottery that was found, it retains a pigment layer with a thickness of about 50 to 160㎛, but with most of the other items, exfoliation and peeling-off of pigment layers can be observed on the surface. The raw materials of the red-burnished pottery contained moderately sorted minerals such as quartz, feldspar, and hornblende, and partly opaque iron oxide minerals were also identified. In particular, the raw materials of the red-burnished pottery from stone coffin tomb #6 were different from those of the other pottery, containing large amounts of hornblende and feldspar. The pottery's red pigment was identified as hematite and showed similar mineral content of raw materials such as fine grained quartz, feldspar, and hornblende. The firing temperature is estimated to have been approximately 900℃, based on their mineral phase. The possibility exists that the raw materials had been collected from the Samdeok-ri area, because diorite and granite diorite with dominant feldspar and hornblende have been identified within 3km of that area. During the pottery manufacturing process, it is estimated that the pigment was painted on the entire surface of the red-burnished pottery after it had been molded and then finished using the abrasion technique. In other words, the red-burnished pottery was made by the process of vessel forming - semi drying - coloring - polishing. The surface and cross-section of the pottery appears differently depending on the concentration of the pigment and the coloring method used after vessels were formed. Most of the excavated pottery features a distinct boundary between pigment and body fabric. However, in the case of pottery in which fine-grained pigments penetrate the body fabric so that layers cannot be distinguished, there is the possibility that the fine-grained pigment layer was applied at a low concentration or immediately after vessel forming. Many cracks can be seen on the surface pigments in thickly painted pottery items, and in many cases, only a small portion of the pigment layers remain due to surface exfoliation and abrasion in the burial environment. It is reported that pottery items may be more easily damaged by abrasion if coated with pigment and polished, so it is believed that the red-burnished pottery of the Samdeok-ri site suffered from weathering in the burial environment. This damage was more extensive in the potsherds that were scattered outside the tomb.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.4
• /
• pp.273-279
• /
• 2021

This study was carried out to investigate the effects of a dietary addition of red ginseng marc, mineral^® and black sugar^® on the dry matter intake, daily gain, yield grade and quality grade of Holstein steers(Bos taurus). A total of 32 fattening Holstein steers(avg. BW 590kg) were assigned to four treatments which included a control diet(mixed concentrate and forage; namely, C) and three treatments diet(T1; control diet+red ginseng marc 200g, T2; control diet+red ginseng marc 100g+mineral 50g, T3; control diet+mineral 50g+ black sugar 20g). The results are summarized as follows; the total feed intake and daily feed intake were significantly(p<0.05) higher in T2 and T3 than in the other two treatments(C and T1). The daily gain was higher in T2 than in the other treatments, but there was no significant difference. The back fat thickness, longissimus muscle area and meat yield grade were no significant difference. The marbling score showed significantly(p<0.05) higher in order of T3(4.5) > T1(4.0) > T2(2.7) > C(2.5). The meat color, fat color, texture and maturity were no significant difference. The quality grade was higher in T3 than in the other treatments(C, T1 and T2), but there was no significant difference. T3, which numerically had a higher daily gain and carcass quality grade, showed higher economic efficiency, whereas C showed low economic efficiency. Based on the above results, T3 treatment compared to the other treatments improved the daily gain, carcass quality grade and economic efficiency.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.6
• /
• pp.503-510
• /
• 2020

Purpose: Bipolar hemiarthroplasty is used as an alternative to open reduction and internal fixation for unstable intertrochanteric fractures in elderly patients. Recent advances in medical systems and technologies have resulted in increased survival rates after intertrochanteric fractures of the femur, requiring selection of the appropriate femoral stems considering the mid- to long-term duration of survival. Hemiarthroplasty was performed for unstable intertrochanteric fractures using a double tapered quadrilateral femoral stem (C2 stem), and the clinical and radiological results were evaluated as a five-year follow-up post-surgery. Materials and Methods: From January 2004 to December 2013, 43 patients (43 hips) who underwent hemiarthroplasty with a C2 stem were enrolled in this study. Their mean age was 78.6 years (range, 70-84 years), and the mean follow-up period was 85.4 months (range, 60-96 months). During the follow-up period, clinical parameters, such as the changes in pain, walking ability, and functional status, were examined. Radiologically, changes in the proximal femur, such as osteoporosis and bone resorption of cortical bone, were noted. Complications that occurred during the follow-up period, such as dislocation and prosthetic features, were also reviewed. Results: Initially, the pain was relieved postoperatively, but it increased four years after surgery. The walking ability was reduced by two steps in nine patients after 60 months, and the Harris hip score was reduced significantly postoperatively after two to three years. Radiologically, cortical osteoporosis occurred in 14 patients. Five patients developed cortical bone resorption. Four of them showed nonunion of the trochanteric fracture fragments, and three of them suffered reverse oblique fractures. Conclusion: Careful selection considering the general health condition and remaining lifespan of the patient would be necessary for primary hip hemiarthroplasty using a 3C type cementless femoral stem for unstable intertrochanteric fractures in elderly patients with osteoporosis.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.2
• /
• pp.1-10
• /
• 2023

This study aims to explore the significance of historic changes and cultural characteristics of landscape architecture in Korean Seowon. Seowon refers to educational private institutes that also served as Confucian shrines and were prevalent during the mid-to-late Joseon dynasty. Seowon comprised three distinct functional spaces: a shrine, a school, and a garden. The concept of Seowon's garden extended beyond designed landscapes to include the surrounding natural environment. The importance of landscape architecture in Seowon is rooted in its connection to the educational philosophy of these institutes. During the Joseon dynasty, scholars revered nature as a manifestation of Confucian ideals, and they believed that close engagement with nature was integral to self-discipline and learning. This research investigated fifteen relatively well-preserved garden in South Korea and conducted a comprehensive analysis of their gardens. The analysis revealed two key findings. Firstly, gardens in Seowon were actively designed and constructed during the early phase of Seowon culture but gradually diminished after the 17th century. This can be attributed to the shift in Seowon's purpose, with a greater emphasis on its religious function over education. Consequently, the significance and presence of landscape architecture in Seowon, which was closely related with its Confucianist education, declined. Secondly, the study explored the historical backgrounds of each Seowon's landscape architecture and found that many of them were designed or influenced by individuals who were later memorialized and deified in the Seowon's shrines. The landscape architecture created by these predecessors was carefully preserved by the faculties and students as a form of respect. Therefore, landscape architecture in Korean Seowon not only conveys the institutional purpose as an educational hub for the local society but also reflects the institute's strong relationship with the figures they worship as shrines.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.343-363
• /
• 2023

Sulawesi island, as a global producer of nickel resources, is leading the rapid growth of nickel industry of Indonesia. Nickel laterite deposits in Sulawesi was formed by lateritization of the world-scale East Sulawesi Ophiolite (ESO) under the active tectonic setting and tropical rainforest climate. In this paper, exploration cases for nickel laterite deposits in five regions of Sulawesi are reported. Regional characteristics on nickel laterite deposits in Sulawesi are understood based on various exploration activities such as outcrop, trench and pit survey, petrological observation, geochemical analysis, and interpretation of drilling data, etc.. In the northeastern part of 'Southeast-Arm', which is a strategic location for nickel industry of Indonesia, ESO is extensively exposed to the surface. In the Morombo and Morowali regions, typical high-grade saprolite-type orebodies with a thickness of 10 to 20 m occur. The cases showed that topographic relief tends to regulate Ni-grade distribution and orebody thickness, and that high grade intervals tend to occur in places where joints and garnierite veins are dense. In the Tinanggea and South Palangga regions in the southern part of the Southeast-Arm, overburden composed of Neogene to Quaternary deposits is a major factor affecting the preservation and profitability of nickel laterite deposits. Despite the overburden, high-grade saprolite-type orebodies composed of Ni-bearing serpentine with garnierite veins occur in a thickness of around 10 m to secure economic feasibility. In contrast, in the Ampana region in the northern part of 'East-Arm', low-grade nickel laterite deposits with immature laterite profile was identified, which is thought to be the result of active denudation due to tectonic uplift. Exploration cases in this paper will help to understand characteristics and controlling factors on nickel laterite deposits in Sulawesi, Indonesia.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.51-63
• /
• 1981

The results of a crossbreeding experiment with a total of 315 litters and 325 pigs of Berkshires, Hampshires, Durocs, Landraces, Large Whites, eight different two-breed crosses and twelve different three-breed crosses, produced at Livestock Experiment Station from 1975 through 1979, are summarized as follows. 1. Number born alive per litter was largest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by the D♂${\times}$(H♂${\times}$L♀) $F_1$ mating, and smallest in the Hampshires. The pigs in the 3rd-6th parities had larger litter size at birth than those in other parities. 2. Birth weight of pig was heaviest in L♂${\times}$Lw♀ mating and lightest in the Large White. The total litter weight at birth was heaviest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ and Lw♂${\times}$L♀ matings, and was smaller in Hampshires and Birkshires. 3. Litter size at weaning was largest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ and Lw♂${\times}$L♀ matings, and was smaller in Durocs and Hampshires. The pigs in the 3rd-6th parities had larger litter size at weaning than those in other parities. 4. The total litter weight at weaning was heaviest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by H♂${\times}$(Lw♂${\times}$L♀) $F_1$♀ and Lw♂${\times}$L♀ matings, and was lighter in Durocs and Hampshires. The weaning weight of pig was largest in D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating and lightest in L♂${\times}$H♀ mating. 5. Survival rate at weaning was highest in L♂${\times}$Lw♀ mating, followed by D♂${\times}$(L♂${\times}$H♀) $F_1$ ♀ and D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ mating, and was lowest in Durocs. 6. The three-breed cross from D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ mating had the highest average gain and lowest feed requirement per unit gain, followed by the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ and H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ matings. The Birkshires and Landraces ranked lowest among the 25 mating groups compared for both of the traits. Males had higher average daily gain than females by about 0.06kg and had lower feed requirement by about 0.14. 7. The three-breed crosses from D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀, D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ and H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ matings reached 90kg body weight at younger age than the other groups. The D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ group reached 90kg at younger age than the Landrace by 39 days. 8. The dressing percentage and lean meat percentage tended to be higher in H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀, H♂${\times}$L♀ and L♂${\times}$B♀ matings compared to the other mating groups. The loin-eye area was largest in the Lw♂${\times}$L♀ mating and smallest in the B♂${\times}$L♀ mating. Males had higher dressing percentage, higher lean meat percentage and lion-eye area than females. The backfat was thinnest in purebred Hampshire and was thickest in B♂${\times}$L♀ mating. 9. The results obtained in this study suggest that the two-breed cross from Lw♂${\times}$L♀ mating, and the three-breed crosses from D♂${\times}$(Lw♂${\times}$L-♀) $F_1$ ♀ and D♂${\times}$(H♂${\times}$L♀) $F_1$♀ matings are superior crossbreds for reproductive and pork prodnction performance.

• Geophysics and Geophysical Exploration
• /
• v.2 no.1
• /
• pp.26-32
• /
• 1999

Among the various seismic data processing sequences, the velocity analysis is the most time consuming and man-hour intensive processing steps. For the production seismic data processing, a good velocity analysis tool as well as the high performance computer is required. The tool must give fast and accurate velocity analysis. There are two different approches in the velocity analysis, batch and interactive. In the batch processing, a velocity plot is made at every analysis point. Generally, the plot consisted of a semblance contour, super gather, and a stack pannel. The interpreter chooses the velocity function by analyzing the velocity plot. The technique is highly dependent on the interpreters skill and requires human efforts. As the high speed graphic workstations are becoming more popular, various interactive velocity analysis programs are developed. Although, the programs enabled faster picking of the velocity nodes using mouse, the main improvement of these programs is simply the replacement of the paper plot by the graphic screen. The velocity spectrum is highly sensitive to the presence of the noise, especially the coherent noise often found in the shallow region of the marine seismic data. For the accurate velocity analysis, these noise must be removed before the spectrum is computed. Also, the velocity analysis must be carried out by carefully choosing the location of the analysis point and accuarate computation of the spectrum. The analyzed velocity function must be verified by the mute and stack, and the sequence must be repeated most time. Therefore an iterative, interactive, and unified velocity analysis tool is highly required. An interactive velocity analysis program, xva(X-Window based Velocity Analysis) was invented. The program handles all processes required in the velocity analysis such as composing the super gather, computing the velocity spectrum, NMO correction, mute, and stack. Most of the parameter changes give the final stack via a few mouse clicks thereby enabling the iterative and interactive processing. A simple trace indexing scheme is introduced and a program to nike the index of the Geobit seismic disk file was invented. The index is used to reference the original input, i.e., CDP sort, directly A transformation techinique of the mute function between the T-X domain and NMOC domain is introduced and adopted to the program. The result of the transform is simliar to the remove-NMO technique in suppressing the shallow noise such as direct wave and refracted wave. However, it has two improvements, i.e., no interpolation error and very high speed computing time. By the introduction of the technique, the mute times can be easily designed from the NMOC domain and applied to the super gather in the T-X domain, thereby producing more accurate velocity spectrum interactively. The xva program consists of 28 files, 12,029 lines, 34,990 words and 304,073 characters. The program references Geobit utility libraries and can be installed under Geobit preinstalled environment. The program runs on X-Window/Motif environment. The program menu is designed according to the Motif style guide. A brief usage of the program has been discussed. The program allows fast and accurate seismic velocity analysis, which is necessary computing the AVO (Amplitude Versus Offset) based DHI (Direct Hydrocarn Indicator), and making the high quality seismic sections.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.230-236
• /
• 2010

Jeju Island is a volanic island which is located about 96 km south of Korean Peninsula. Volcanic ejecta, and volcaniclastic materials are widespread as soil parent materials throughout the island. Soils on the island have the characteristics of typical volcanic ash soils. This study was conducted to reclassify Jeju series based on the second edition of Soil Taxonomy and to discuss the formation of Jeju series in Jeju Island. Morphological properties of typifying pedon of Jeju series were investigated, and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon has dark brown (10YR 3/3) silt clay loam A horizon (0~22 cm), strong brown (7.5YR 4/6) silty clay BAt horizon (22~43 cm), brown (7.5YR 4/4) silty clay Bt1 horizon (43~80 cm), brown (7.5YR 4/6) silty clay loamBt2 horizon (80~105 cm), and brown (10YR 5/4) silty clay loam Bt3 horizon (105~150 cm). It is developed in elevated lava plain, and are derived from basalt, and pyroclastic materials. The typifying pedon contains 1.3~2.1% oxalate extractable (Al + 1/2 Fe), less than 85%phosphate retention, and higher bulk density than 0.90 Mg $m^{-3}$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to 150 cm, and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. That can be classified as Ultisol, not as Andisol. Its has 0.9% or more organic carbon in the upper 15 cm of the argillic horizon, and can be classified as Humult. It dose not have fragipan, kandic horizon, sombric horizon, plinthite, etc. in the given depths, and key out as Haplohumult. A hoizon (0~22 cm) has a fine-earth fraction with both a bulk density of 1.0 Mg $cm^{-3}$ or less, and Al plus 1/2 Fe percentages (by ammonium oxalate) totaling more than 1.0. Thus, it keys out as Andic Haplohumult. It has 35% or more clay at the particle-size control section, and has thermic soil temperature regime. Jeju series can be classified as fine, mixed, themic family of Andic Haplohumults, not as ashy, thermic family of Typic Hapludands. In the western, and northern coastal areas which have a relatively dry climate in Jeju Island, non Andisols are widely distributed. Mean annual precipitation increase 110 mm, and mean annual temperature decrease $0.8^{\circ}C$ with increasing elevation of 100m. In the western, and northern mid-mountaineous areas Andisols, and non Andisols are distributed simultaneously. Jeju series distributed mainly in the western and northern mid-mountaineous areas are developed as Ultisols with Andic subgroup.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.4 s.59
• /
• pp.669-685
• /
• 1997

Previous studies, reporting the inverse relationship between osteoarthritis and osteoporosis suggest the existence of possible pathophysiologic mechanisms between them. To examinine the hypothesis that 'bone mineral densities of women with osteoarthritis are significantly higher than that of women without osteoarthritis in Korea', subjects from the health and nutritional examination survey in Kuri city were sampled. Samples were selected through multi-stage sampling frame using established clusters in Kuri city. From August 18 to September 10,1997, the survey was conducted. Among the. total number of selected sample population (1,656 people), response .ate was 52.4 percent (348 men and 519 women). 420 women who took BMD measurement, radiologic exam, and anthropometric exam were selected for the analysis. The analytic results are as follows. 1. General characteristics: Mean BMD was $0.493g/cm^2$, mean age was 43.0, mean BMI was $23.9kg/m^2$. The number of women who experienced menopause was 106, hysterectomy was 19. There were 0 case of osteoarthritis of hip, 64 cases of osteoarthritis of knee, and 2 cases of osteoarthritis of hand. 2. Univariate analysis results: Mean BMD of women with the osteoarthritis of knee was significantly lower than that of women without the osteoarthritis of knee(0.4269 vs. $0.5057g/cm^2$). But, there were too few cases of osteoarthritis of hip and hand, so comparative studies of BMD in osteoarthritis of hip and hand could not be conducted. There were significant differences of BMD among pre-menopause group(0.5204), post-menopause group(0.4206), and hysterectomy group(0.4881). Additionally, there were significant differences of BMD among diabetes group(0.4297), impaired glucose tolerance group(0.4874), and normal group(0.5057). Furthermore, age, parity, BMI, bioimpedance were significantly related with BMD. 3. Multivariate analysis results: To examinine the relationship between osteoarthritis and BMD while controlling the other variables' effects which were significant in the univariate analyses, multiple linear regression analysis was done. But, it was found that osteoarthritis of knee was not a significant variable to BMD anymore. While age and menopause had significant negative relationship with BMD. Diabetes, parity, BMI, and bioimpedance did not have significant relationships with BMD. After stratification of subjects according to menopause, multiple linear regression analyses were done to each strata. Consequently, age in post-menopause group, age and osteoarthritis of knee in hysterectomy group showed significant negative relationship with BMD. The results did not support the many results of other previous studies done with white men and women. further studies of biological plausibility to Korean women are recommended. Also it is suggested that longitudinal study to verify the relationship between osteoarthritis and BMD will be valuable.