• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.71-71
• /
• 2016

하천 공학에 있어서 제방 월류에 대한 분석과 예측은 과거와 현재, 그리고 미래에도 치수측면에서 매우 중요한 요소이다. 이를 위해 복단면 수로의 단면을 세분하여 유량과 수위의 관계를 분석하여 왔으며, 최근에는 Lateral Distribution Method라 불리는 수치기법을 이용하여 주수로와 홍수터 사이에서의 난류특성이나 운동량 교환 등을 분석하기도 한다. 하지만 기존의 연구들은 제방을 넘어 월류한 경우의 흐름 특성에만 치중하고 있으며, 주수로 내에서의 흐름특성에 관한 연구는 미진하다. 하천은 표면 유출수와 지하로부터 제공되는 기저유출수로 구성되며, 주변 수리 수문 조건에 따라 그리고 물수지 변화에 따라 유출수와 기저유출수가 하천에 기여하는 바는 변화된다. 기저유출은 지표수의 양과 질에 지대한 영향을 미치고 있으며, 기저유출 특성은 수자원 관리를 위한 저수량(low-flow) 특성 평가에 있어서 매우 중요하다. 따라서 본 연구에서는 기저유출수 분리기법을 적용하여 단면관측 유량곡선으로부터 기저유출량을 산정하고, 또한 해당단면에 LDM기법을 적용하여 복잡한 형상을 이루고 있는 자연하천의 횡단면에서의 수위-유량 곡선을 실제 측정치와 비교하여, 기저유출이 하천에 미치는 영향과 정량적인 양에 대해서 알아보고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.3
• /
• pp.219-226
• /
• 2012

Columns are the key elements supporting load in structure. Column failure causes the structure to collapse. It is important to evaluate residual strength for damaged columns under blast load for preventing progressive collapse. In this paper, columns were investigated to compare the blast resistance on the change of the number of steel bars within the range of reinforcement ratio. And this study was carried out 4 different analytical models to evaluate effects of aspect ratio. The results indicate that the vertical strain was unaffected by the number of steel bars and aspect ratio. As the number of steel bars facing blast load increase, the blast resisting capacity of the columns was improved in the lateral strain. Also, the analysis results showed that a large moment of inertia of area, as compared to a small one would be superior in residual strength as well as force of restitution.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.12-22
• /
• 2017

It is important to predict accurately reverberation level, which is a limiting factor in underwater target detection. Recently, the studies have been expanded from monostatic sonar to bistatic sonar in which source and receivers are separated. To simulate the bistatic reverberation level, the computation processes for propagation, scattering strength, and scattering cross section are different from those in monostatic case and more complex computation processes are required. Although there have been many researches for bistatic reverberation, few studies have assessed the bistatic scattering cross section which is a key factor in simulate reverberation level. In this paper, a new method to estimate the bistatic scattering cross section is suggested, which uses the area of intersection between two circles. Finally, the reverberation levels simulated with the scattering cross section estimated using the method suggested in this paper are compared with those estimated using the methods previously suggested and those measured from an acoustic measurements conducted in May 2013.

• Composites Research
• /
• v.35 no.5
• /
• pp.340-346
• /
• 2022

In this study, an optimal structural design of composite helicopter blades is performed using the genetic algorithm-based optimizer PSGA (Particle Swarm assisted Genetic Algorithm). The blade sections consist of the skin, spar, form, and balancing weight. The sectional geometries are generated using the B-spline curves while an opensource code Gmsh is used to discretize each material domain which is then analyzed by a finite element sectional analysis program Ksec2d. The HART II blade formed based on either C- or D-spar configuration is exploited to verify the cross-sectional design framework. A numerical simulation shows that each spar model reduces the blade mass by 7.39% and 6.65%, respectively, as compared with the baseline HART II blade case, while the shear center locations being remain close (within 5% chord) to the quarter chord line for both cases. The effectiveness of the present optimal structural design framework is demonstrated, which can readily be applied for the structural design of composite helicopter blades.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.142-150
• /
• 2012

The waveguide finite element (WFE) method is a useful numerical technique to investigate wave propagation along waveguide structures which have uniform cross-sections along the length direction ('x' direction). In the present paper, the vibration and radiated noise of the submerged pipe with fluid is investigated numerically by coupling waveguide finite elements and wavenumber boundary elements. The pipe and internal fluid are modelled with waveguide finite elements and the external fluid with wavenumber boundary elements which are fully coupled. In order to examine this model, the point mobility, dispersion curves and radiated power are calculated and compared for several different coupling conditions between the pipe and internal/external fluids.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.919-930
• /
• 2014

In this study, the load capacities and behaviors of a shotcrete member with steel supports, as composite member, are investigated numerically by using a fiber section element. The cross section of a shotcrete lining with steel support is divided into a bundle of fibers, which are allocated nonlinear stress-strain relations and used for determining internal forces. To verify the used approach of the finite element method for shotcrete with steel supports, the load-displacement relations of shotcrete lining obtained by numerical analysis are compared with existing experimental results and are analyzed with the stress distribution of the shotcrete and steel support obtained numerically. As a result, it is shown that the proposed approach can predict the load capacities of each material and the overall nonlinear behavior of shotcrete lining with steel supports. The change of location of the neutral axis and the flexural resistance ratio of each material are also derived from the stress distribution of the cross section of the shotcrete lining with steel supports. From the results, it is concluded that the flexural resistance performance of steel support should be considered in shotcrete lining design.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1601-1610
• /
• 1991

본 연구에서는 3차원 스트레칭 문제의 2차원화가 가능한 주요 단면에 대해서 박막요소와 적층 셸(degenerated shell) 요소를 혼합하여 사용하는 선택적 M/S 방법을 이용하여 2차원 문제로 해석하였다. M/S변환 조건으로는 변형형상의 기하학적 조건 을 고려하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.196-205
• /
• 2000

Computed Tomography (CT), Nuclear Magnetic Resonance Imaging (MR1) and some ultrasound techniques make it possible to obtain cross sections of human body or mechanical parts. In CAD system, a series of sectional surfaces can also be obtained from solid models of 3D objects. In this paper we introduce a tetrahedral meshing algorithm from these series of general sections using basic operators. In this scheme. general sections of three-dimensional object are triangulated first and side surfaces between two sections are triangulated by the use of tiling process. Finally tetrahedral meshing process is performed on each layer of 3D objects, which is composed of two general sections and one side surface.

• Water for future
• /
• v.20 no.4
• /
• pp.249-256
• /
• 1987

Wave forces on fixed two-dimensional objects submerged in water of finite depth were analysed by Boundary Element Method using linear elements.It is assumed that the wave forces may be described by linear theory and that incident wave direction is normal to the objects of infinite length. In this paper, wave forces on a bottom-seated half cross section pipeline, a circular pipeline, a submerged pipeline and submerged breakwater of arbitrary shape were studied. The accuracy of the computational scheme is investigated by comparing the numerical results with the existing laboratory results and analytical solutions of other researchers.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.99-106
• /
• 2003

In this paper, a new optimized design methodology is proposed. It integrates the discrete element method (DEM) and real-coded genetic algorithm for the design of landfill lining system subjected to equipment loadings. In applying the design method to a tapered lining system, the effect of the taperness, which means the change of shape for cover soil, is examined. The optimization problem to maximize the capacity of a waste-containment facility is solved using real coded genetic algorithm. Numerical example analysis is carried out for a typical landfill slope structure.