• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.205-212
• /
• 2008

In the environment with multiple heterogeneous wireless sensor networks with a single point of sensed data collection or a gateway (GW), relay points (RPs) may be required for the energy efficient delivery of sensed data from static or mobile sinks to the GW. The optimal placement of RPs becomes an even more difficult problem if static sinks are dynamically added or the trajectory of mobile sinks can not be known in advance. In order to resolve this problem, we propose a mechanism to deploy RPs in a grid pattern and to use the tree-based relaying network for reducing the cost of the RP and for reducing the control overhead incurred by the route setup from sinks to the GW. For the performance evaluation of our proposed mechanism, we have carried out a numerical analysis on a single route setup from a sink to the GW and, for more general performance evaluations, ns-2 based simulations have been carried out. According to the performance evaluation results, our tree-based relaying network mechanism outperforms that based on AODV in terms of the data delivery time, the network service time and the control overhead.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.187-194
• /
• 2020

When a human being grew older, followed by visually and perceptually impaired, and dementia, it jeopardizes safety and life unless supportive design is secured for a living environment. This supportive space is based on universal design concept which offers safe-oriented, and simple use by incorporating gender and physical/mental limitation. The study of purppose was to examine the appropriateness of barrier-free standard for seniors' living in apartment through IPA. Chi-square analysis found that satisfaction with BF space is lowered as aging is continued and for female group. Regression analysis indicated that sink was the prime predictor in satisfaction, and stair/elevator was the most important variable. IPA concluded that sink, bath, shower/locker and alert/egress were prime BF indexes to be improved among 14 elements, implying careful design in sanitation area for seniors.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.5
• /
• pp.809-816
• /
• 2024

In a Wireless Sensor Network (WSN) environment, where numerous small sensors are arranged in a certain space to form a wireless network, each sensor has limited battery power. Therefore, the lifetime of each sensor node is directly related to the network's lifetime, necessitating efficient routing to maximize the network's lifespan. This study proposes a routing protocol based on PEGASIS, a representative energy-efficient routing protocol in WSN environments. The proposed protocol categorizes nodes into groups based on their distance from the sink node, forms multiple chains within each group, and selects the leader node for each group by comparing the remaining energy levels. The proposed method ensures that each group's leader node is the one with the highest energy within that group, which has been shown to increase the network's lifespan compared to the traditional PEGASIS method.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.11
• /
• pp.385-392
• /
• 2016

Recently, Expectation Area-based Real-time Routing (EAR2) protocol has been proposed to support real-time routing in wireless sensor networks. EAR2 considers the expectation area of a mobile sink and uses flooding within the expectation area. However, flooding leads to excessive energy consumption and causes long delay against real-time routing. Moreover, since EAR2 uses single path to the expectation area, it is difficult to support reliable routing in sensor networks with high link failures. Thus, to overcome these limitation of EAR2, this paper proposes a reliable and real-time routing protocol based on virtual grids and multipath for mobile sinks. To support real-time routing, the proposed protocol considers expectation grids belonged to the expectation area. Instead of flooding within the expectation area, the proposed protocol uses multicasting to the expectation grids and single hop forwarding in an expectation grid because the multicasting can save much energy and the single hop forwarding can provide short delay. Also, the proposed protocol uses multipath to the expectation grids to deal with link failures for supporting reliable routing. Simulation results show that the proposed protocol is superior to the existing protocols.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.153-158
• /
• 2016

Broadcasting in multi-hop wireless sensor networks is a basic operation that supports many applications such as route search, setting up addresses and sending messages from the sink to sensor nodes. The broadcasting using flooding causes problems that can be mentioned as a broadcasting storm such as redundancy, contention and collision. A variety of broadcasting schemes using wireless sensor networks have been proposed to achieve superior performance rather than simple flooding scheme. Broadcasting algorithms in wireless sensor networks can be classified into six subcategories: flooding scheme, probabilistic scheme, counter-based scheme, distance-based scheme, location-based schemes, and neighbor knowledge-based scheme. This study analyzes a simple flooding scheme, probabilistic scheme, counter-based scheme, distance-based scheme, and neighbor knowledge-based scheme, and compares the performance and efficiency of each scheme through network simulation.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.49-56
• /
• 2010

Severe energy constraints and the low power consumption require the significance of the energy efficient error control mechanisms in wireless sensor network (WSN). In this paper, an automatic repeat request (ARQ) methodology for the analysis of error control schemes in WSN is presented such that the effects of packet length, the modulation scheme and the interference effect of the wireless channel are investigated. Moreover, an analyis of ARQ error control is provided by considering two major architectures for wireless sensor network, i.e., Mica2 and MicaZ sensor nodes. And the throughput performance of WSN with asynchronous FSK signal and DSSS-OQPSK signal with selective repeat ARQ scheme are analyzed in multiple interference environment, and the probability of receiving a correct bit and packet from target node to sink node is evaluated as a function of the channel parameter, the number of wireless sensor node, and the spreading factor.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.46-54
• /
• 1998

A planar Bi-Sb multijunction thermal converter, which is consisted of a linear or bifilar thin film NiCr-heater and a thin film Bi-Sb thermopile, has been fabricated, and its ac-dc transfer characteristics were examined in a frequency range from 10 Hz to 10 KHz. In order to increase the thermal sensitivity and to decrease the ac-dc transfer error of a thermal converter, the heater and the hot junctions of a thermopile were prepared on a Si$_3$N$_4$/SiO$_2$/Si$_3$N$_4$-diaphragm which acts as a thermal isolation layer, and the cold junctions on the Si$_3$N$_4$/SiO$_2$/Si$_3$N$_4$-thin film supported with the silicon rim which functions as a heat sink. The respective thermal sensitivities in air and in a vacuum of the converter with a built-in bifilar heater were about 14.0 ㎷/㎽ and 54.0 ㎷/㎽, and the ac-dc voltage and the current transfer difference ranges in air were about $\pm$0.60 ppm and $\pm$0.11 ppm, respectively, indicating that the ac-dc transfer accuracy of the converter are much higher than that of a commercial 3-dimensional multijunction thermal converter. However, the output thermoelectric voltage fluctuation of the converter was rather high.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.5
• /
• pp.341-350
• /
• 2014

In this paper, an energy efficient clustering scheme using self organization method is proposed. The proposed scheme selects a cluster head considering not only the number of neighbor nodes but also the residual battery amount. In addition, the network life time is extended by re-selecting the cluster heads only in case the current cluster head's residual energy falls down below a certain threshold level. Accordingly, the energy consumption is evenly distributed over the entire network nodes. The cluster head delivers the collected data from member nodes to a Sink node in a way of multi-hop relaying. In order to evaluate the proposed scheme, we run computer simulation in terms of the total residual amount of battery, the number of alive nodes after a certain amount of time, the accumulated energy cost for network configuration, and the deviation of energy consumption of all nodes, comparing with LEACH which is one of the most popular network clustering schemes. Numerical results show that the proposed scheme has twice network life-time of LEACH scheme and has much more evenly distributed energy consumption over the entire network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.15-21
• /
• 2009

The goal of wireless sensor networks is to collect sensing data on specific region over wireless communication. Sink node gathers all local sensing data, processes and transmits them to users who use sensor networks. Generally, senor nodes are low-cost, low power devices with limited sensing, computation and wireless communication capabilities. And sensor network applies to multi-hop communication on large-scale network. As neighboring sensor nodes have similar data, clustering is more effective technique for 'data-aggregation'. In cluster formation technique based on multi-hop, it is necessary that the number of cluster member nodes should be distributed equally because of the balance of cluster formation To achieve this, we propose a method to customize cluster member nodes for energy-efficiency in wireless sensor networks.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.73-78
• /
• 2018

In this paper, we consider a system where multiple sources are encrypted in separated nodes and sent through their respective public communication channels into a joint sink node. We are interested at the problem on protecting the security of an already existing system such above, which is found out to have correlated encryption keys. In particular, we focus on finding a solution without introducing additional secret keys and with minimal modification to minimize the cost and the risk of bringing down an already running system. We propose a solution under a security model where an eavesdropper obtains all ciphertexts, i.e., encrypted sources, by accessing available public communication channels. Our main technique is to use encoders of universal function to encode the ciphertexts before sending them to public communication channels.