• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.41-49
• /
• 2010

This paper proposes a new high speed SHA-1 architecture using multiple unfolding and pre-computation techniques. We unfolds iterative hash operations to 2 continuos hash stage and reschedules computation timing. Then, the part of critical path is computed at the previous hash operation round and the rest is performed in the present round. These techniques reduce 3 additions to 2 additions on the critical path. It makes the maximum clock frequency of 118 MHz which provides throughput rate of 5.9 Gbps. The proposed architecture shows 26% higher throughput with a 32% smaller hardware size compared to other counterparts. This paper also introduces a analytical model of multiple SHA-1 architecture at the system level that maps a large input data on SHA-1 block in parallel. The model gives us the required number of SHA-1 blocks for a large multimedia data processing that it helps to make decision hardware configuration. The hs fospeed SHA-1 is useful to generate a condensed message and may strengthen the security of mobile communication and internet service.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.48-58
• /
• 2012

With the development of sensing devices and wireless communication technologies, wireless sensor networks are composed of a large number of sensor nodes that are equipped with limited computing performance and restricted communication capabilities. Besides, the sensor nodes are deployed in hostile or unattended environments. Therefore, the wireless sensor networks are vulnerable to security. In particular, the fatal damage may be occurred when data are exposed in real world applications. Therefore, it is important for design requirements to be made so that wireless sensor networks provide the strong security. However, because the conventional security schemes in wired networks did not consider the limited performance of the sensor node, they are so hard to be applied to wireless sensor networks. In this paper, we propose a secure multipath transmission scheme based on one-way hash functions in wireless sensor networks considering the limited performance of the wireless sensor nodes. The proposed scheme converts a sensor reading based on one of one-way hash functions MD5 in order to make it harder to be cracked and snooped. And then, our scheme splits the converted data and transfers the split data to the base station using multi-path routing. The experimental results show that our proposed scheme consumes the energy of just about 6% over the existing security scheme.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.11-18
• /
• 2016

Since GNSS signals get blocked by buildings in urban canyons or narrow alleys, it is very difficult to secure a enough number of visible satellites for satellite navigation in those poor signal-reception environments. In those situations, one cannot get their coordinates or obtain accurate positions. In this study, a couple of strategies for improving positioning accuracy in urban canyons were developed and their performance was verified. First of all, we combined GPS and GLONASS measurements together and devised algorithms to quality-control observed signals and eliminate outliers. Also, a new multipath reduction scheme was applied to minimize its effect by utilizing SNR values of the observed signals. For performance verification of the developed technique, a narrow alley of 10m width located near the back gate of the Inha University was selected as the test-bed, and then we conducted static and kinematic positioning at four pre-surveyed points. We found that our new algorithms produced an 45% improvement in an open-sky environment compared with the positioning result of a low-cost u-blox receiver. In the alleys, 3-D accuracy improved by an average of 37%. In the case of kinematic positioning, especially, biases showing up in regular receivers got eliminated significantly through our new filtering algorithms.

• Annual Conference of KIPS
• /
• 2002.11b
• /
• pp.1547-1550
• /
• 2002

MANET은 전형적인 무선 네트워킹과는 다른 새로운 무선 네트워킹 파라다임으로써 기존 유선 망의 하부 구조에 의존하지 않고 이동 호스트틀로만 구성된 네트워크이다. Ad Hoc망에서 통신을 하기 위해서는 출발지 노드에서 목적지 노드까지 데이터 전송을 위한 라우팅에 관한 문제이다. Ad Hoc망에서는 모든 단말기의 위치변화가 가능하기 때문에 경로설정에 어려움이 따른다. 노드간에 정보를 보내고자 할 때 노트가 인접한 상태가 아니면 정보를 직전 보낼 수 없고 여러 중간 노드들을 거쳐서 정보를 보내는 다중-홉 라우팅 방식을 사용해야 한다. 따라서 중간 노드들은 패킷 라우터의 역할을 해야하는데 무선 통신 자체가 좁은 대역폭과 한정된 채널을 가지고 전송 범위가 제한되는 문제가 있다. 또한 노트 자체의 이동성과 전력 소모 등으로 인한 이탈은 망 위상을 수시로 변화시키므로 노트간에 정보를 전송하는데 가장 종은 경로는 수시로 변경될 수 있으므로 많은 어려움이 따르게 된다. 본 논문에서는 이러한 문제의 해결방안으로 경로유지 과정에서 Ad Hoc망 내의 노드들은 이동성의 특성으로 인해 현재 사용되는 경로 보다 더 짧고 효율적인 경로가 발생하고 중간 노트가 이동 될 때 새로운 경로로 갱신하여 솔기없는 최적의 경로를 유지할 수 있는 방법을 제안한다. 제안 방법은 ZRP의 IERP에서 감청모드를 통하여 사공중인 경로보다 최적의 경로를 감지하여 새로운 경로로 갱신하는 방법과 중간 노드가 이동하여 경로가 깨진 경우 부분적으로 경로를 복구하는 방법을 제시하여 항상 최적화된 경로를 유지함으로써 Ad Hoc망의 위상변화에 대한 적응성을 높일 수 있도록 한다. SQL Server 2000 그리고 LSF를 이용하였다. 그리고 구현 환경과 구성요소에 대한 수행 화면을 보였다.ool)을 사용하더라도 단순 다중 쓰레드 모델보다 더 많은 수의 클라이언트를 수용할 수 있는 장점이 있다. 이러한 결과를 바탕으로 본 연구팀에서 수행중인 MoIM-Messge서버의 네트워크 모듈로 다중 쓰레드 소켓폴링 모델을 적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.697-702
• /
• 2023

Recently, with the introduction of drones, a core technology of the 4th industrial revolution, various convergence education using drones is being conducted in school education sites. In particular, drone theory and practice education is being conducted in connection with free semester classes and career exploration. The drone convergence education program has higher learner satisfaction than simple demonstration and practice education, and the learning effect is high due to direct practical experience. However, since practical education is being conducted for a large number of learners, it is impossible to restrict and control the flight of a large number of drones in a limited place. In this paper, we propose a monitoring system that allows the instructor to monitor multiple drones in real time and learners to recognize collisions between drones in advance when multiple drones are operated, focusing on education operated in schools. The communication module used in the experiment was equipped with GPS in Murata LoRa, and the server and client were configured to enable monitoring based on the location data received in real time. The performance of the proposed system was evaluated in an open space, and it was confirmed that the communication signal was good up to a distance of about 120m. In other words, it was confirmed that 25 educational drones can be controlled within a range of 240m and the instructor can monitor them.

• Composites Research
• /
• v.34 no.4
• /
• pp.241-248
• /
• 2021

As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.311-318
• /
• 2009

This paper shows the research about the development of software receiving platform processing GPS/Galileo L1/E1/E5a signal. Various researches for new GNSS signal character are possible using software receiving platform by facile program code modification. In addition, the program that processes GPS and Galileo signal integration is expected to help developing integration of receiver algorithm that deal with new various GNSS signal. In this paper, it is introduced the structure of GPS/Galileo receiving platform using sampled IF data as a program input. The function of the software platform embodied using MATLAB tool is tested by live data from Galileo test satellites. The software platform is modulated according to their roll and function. Each module is able to use selective function on GNSS signal.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.124-130
• /
• 1998

High-speed 3D vision systems are essential for autonomous robot or vehicle control applications. In our study, a stereo vision process has been developed. It consists of three steps : extraction of edges in right and left images, matching corresponding edges and calculation of the 3D map. This process is implemented in a VME 150/40 Imaging Technology vision system. It is a modular system composed by a display, an acquisition, a four Mbytes image frame memory, and three computational cards. Programmable accelerator computational modules are running at 40 MHz and are based on TMS320C31 DSP with a $64{\times}32$ bit instruction cache and two $1024{\times}32$ bit internal RAMs. Each is equipped with 512 Kbytes static RAM, 4 Mbytes image memory, 1 Mbytes flash EEPROM and a serial port. Data transfers and communications between modules are provided by three 8 bit global video bus, and three local configurable pipeline 8 bit video bus. The VME bus is dedicated to system management. Tasks between DSPs are distributed as follows: two DSPs are used to edges detection, one for the right image and the other for the left one. The last processor computes the matching process and the 3D calculation. With $512{\times}512$ pixels images, this sensor generates dense 3D maps at a rate of about 1 Hz depending of the scene complexity. Results can surely be improved by using a special suited multiprocessors cards.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.497-504
• /
• 2020

Constructing speaker embeddings in speaker verification is an important issue. In general, a self-attention mechanism has been applied for speaker embedding encoding. Previous studies focused on training the self-attention in a high-level layer, such as the last pooling layer. In this case, the effect of low-level layers is not well represented in the speaker embedding encoding. In this study, we propose Masked Cross Self-Attentive Encoding (MCSAE) using ResNet. It focuses on training the features of both high-level and low-level layers. Based on multi-layer aggregation, the output features of each residual layer are used for the MCSAE. In the MCSAE, the interdependence of each input features is trained by cross self-attention module. A random masking regularization module is also applied to prevent overfitting problem. The MCSAE enhances the weight of frames representing the speaker information. Then, the output features are concatenated and encoded in the speaker embedding. Therefore, a more informative speaker embedding is encoded by using the MCSAE. The experimental results showed an equal error rate of 2.63 % using the VoxCeleb1 evaluation dataset. It improved performance compared with the previous self-attentive encoding and state-of-the-art methods.

• The KIPS Transactions:PartB
• /
• v.11B no.5
• /
• pp.603-610
• /
• 2004

The distributed Information Retrieval System centrally controlled by mediator or meta search engine result in congestion of heavy traffic and int he problem of increment of cost for the reason of the design of complicated algorithm for central control and installation of hardware. So to figure out this problem, the way is needed that has independent retrieval functionality and can cooperate each other without dependency. In this paper, we overview a few works involved in distributed information retrieval system, then, implement algorithm and design the frame-work of distributed information retrieval system using sequential transferring method(STM) including multiple information retrieval system separated from central control. For this first of all, we present a web partition policy which devide and manage web logically and we present the sequential query processing way by means of illustration through changing numbered information retrieval system. Then, we also present 3-layered structure of framework and function and module of each layer suitable for information retrieval system. Last of ail, for effective implementation of STM algorithm we analysis module structure and present description of pseudocode of this, and show that the proposed STM algorithm works smoothly by demonstration of sequential query transfer process between servers.