• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.648-653
• /
• 2011

In this paper, coordinated space division multiple access(SDMA) technology is proposed to mitigate inter-cell interference by using partial channel state information in cooperative wireless communications system with limited feedback. Each AT selects an optimal cluster transmission mode and sends it back to a cluster scheduler, and at the cluster scheduler, ATs are scheduled within a AT group with the identical cluster transmission mode, and the optimal transmission mode and the corresponding scheduled ATs are determined to maximize scheduling priority. Also, in order to enhance multiuser diversity gain, an extended transmission feedback method is proposed to feed back multiple preferred cluster transmission modes at each AT. It is shown that the proposed coordinated SDMA scheme outperforms existing non-coordinated SDMA schemes in terms of the average system throughput.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.143-147
• /
• 2014

In this paper, a novel MDI(Multiplex Distribution Interface) analyzer is designed in Ethernet-mode for DRM(Digital Radio Mondiale), and DRM+(Digital Radio Mondiale Plus) systems. The proposed MDI analyzer can reduce the overload of MDI packets by using memory sharing techniques into a common module block. In consequence, it verifies the received MDI packets by composition information of IP(Internet Protocol) and FAC(Fast Access Channel)/SDC(Service Description Channel) in DRM/DRM+ systems for the next generation digital radio broadcasting systems.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.223-227
• /
• 2002

Polymeric multi-mode optical waveguides were fabricated for parallel optical interconnection. Waveguide structures were molded by a Ni mold master using a hot embossing technique. The Ni mold master was manufactured by LIGA process. Multimode optical waveguides with a 48$\times$47 ${\mu}{\textrm}{m}$$^2$cross-section were produced by a simple two-step process. The propagation losses of the multimode waveguide measured at 0.85 ${\mu}{\textrm}{m}$ and 1.3 ${\mu}{\textrm}{m}$ wavelengths were 0.38 dB/cm and 0.66 dB/cm, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7C
• /
• pp.529-533
• /
• 2008

In this paper, we have analysed the channel loss characteristics of optical fiber due to the changing of radius of curvatures and the number of cable banding, and due to the connection between different modes of fiber to derive revisions of technical regulation for FTTH. The results of test show that all conditions are satisfied the criteria(allowable radius of curvatures, 30mm) with the exception of conditions of 10mm radius in single mode case and show that source of light in multi mode fiber can't be delivered to single mode fiber. henceforth, we should study more intensively on the standards of connection between cables in the different modes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.68-78
• /
• 2013

In this paper, we propose an early spectrum sensing(ESS) as an advance preparation for radio-access trial, which enables multi-mode terminals to access the most appropriate radio-access system in a cloud-conceptual base station system where multiple radio access technologies(RATs) coexist. Prior to a random access to one of RATs, a multi-mode terminal conducts a spectrum sensing over entire frequency bands of whole RATs, then select the RAT with the lowest sensing power, that is likely to have the most available spectrum. Thus, an access failure caused by that the selected RAT has no available radio spectrum could be avoidable in advance. In computer simulation, we consider as various RATs as possible. First, circuit and packet systems are taken into consideration. In addition, the packet systems are classified according to the feasibility of carrier aggregation(CA). In case of terminal, three modes are considered with circuit-only, packet-only, and multi-mode. Subsequently, packet traffic is classified into real-time and non-real-time traffic with three different tolerable delay levels. The simulation includes a call process starting with a call generation and ending up with a resource allocation reflecting individual user's QoS requirements and evaluates the proposed scheme in terms of the successful access probability, system access time, system balancing factor and packet loss probability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.512-522
• /
• 2005

In this paper, an optimal determination method of the subband-frame size and mode-switching level is proposed for adaptive OFDM-TDD systems in frequency-selective time-varying channels. The optimization problem considering frequency selectivity. user's mobility, and the signaling overhead caused by the mode change information is formulated in the maximum spectral efficiency sense satisfying the target BER. Assuming that subband-frame size is given, the mode-switching level is first optimized so that the spectral efficiency can be maximized satisfying the target BER. The subband-frame size among candidates is then determined, which maximizes the spectral efficiency. Simulation results show that the proposed scheme outperforms conventional schemes, in terms of the spectral efficiency and the BER.

• Electronics and Telecommunications Trends
• /
• v.23 no.3
• /
• pp.72-81
• /
• 2008

차세대 이동통신 서비스나 Beyond 4G 이동통신 서비스의 단말기는 유비쿼터스 정보화 사회의 도래에 발맞춰 기존의 single mode 시스템에서 탈피하여 3G LTE, Mobile WiMAX(WiBro), DMB, IEEE 802.11b/g/n 등의 다중 이동통신 서비스를 지원하는 단말기로 발전하는 추세이다. 또한 고속 데이터 전송을 위한 MIMO 및 스마트 안테나 등의 다중 접속 기능은 다중 밴드/다중 모드/다중 경로 처리 구조의 RF transceiver를 요구하고 있다. 이러한 융합 universal 단말기를 구현하기 위해서는 여러 이동통신 서비스를 지원하는 "Reconfigurability and Convergence" RF transceiver가 필요하지만 현재의 집적 기술로는 0-수 GHz에 할당되어 있는 모든 이동통신 서비스를 지원하는 단말기 구현에 제약사항이 많기 때문에 미국 및 유럽의 국외 연구기관과 기업에서는 2-3개의 선택적인 이동통신 서비스를 지원하는 RF transceiver를 개발하여 세계 시장에서 경쟁 준비를 하고 있다. 본 고에서는 차세대 이동통신 단말기의 RF transceiver 칩 셋 기술과 국내외 개발 동향에 대해 살펴보고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.101-108
• /
• 2001

In this paper we focus on dynamic reservation slot allocation scheme for supporting QoS of a voice traffic in WATM MAC. Especially, voice traffic is the most important real-time object, and so we propose a new MAC protocol for voice traffic over WATM networks in the multimedia environment. According to the characteristics of voice traffic which is repeatedly in silent state and active state, new protocol allocates reservation slots dynamically with respect to the number of silent voice source of which starting time is stored to the state table in base station (BS). The simulation results show that the proposed protocol has better performance than slotted ALOHA in average access delay, collision rate, better than NC-PRMA(Non Collision Packet Reservation Multiple Access) in band width efficiency, and can provide a certain level of QoS requirement by the given slot assignment even though the number of voice terminals is increased.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.29-35
• /
• 1998

In this paper, the proposed audio/video control device for multiple user in the multimedia platform is changed for the better a disadvantage that must get one computer per participant to process a floor mode needed for interactive collaboration in the multimedia based distance education. It also proposed simulator of co-work environment that included multimedia data. This developed to proceed a multimedia distance education efficiently and sharing a computer among multiple users. Therefore, this is resulting in a reduction the cost needed to build a multimedia distance education system as well as totally simplified the organization of system. It also offers compatibility and generality, interfacing with the printer port of standard PC supporting the bi-direction mode.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.367-373
• /
• 2011

Guided waves inspection techniques that are different with inspection technique by bulk waves are widely used in pipe line evaluation due to advantages of long distance inspection. However, most of pipe lines at industrial fields are buried and/or coated. In this case, due to the attenuation effect from soil and/or coating material, there are a lot of difficulty on inspection by conventional ultrasonic technique. In this paper, guided waves propagating patterns are calculated with respect to excitation mode by Normal Mode Expansion(NME). Guided waves patterns based on excited by single transducer and guided wave focusing technique have employed to analyze focusing pattern on a pipe. A longitudinal mode and high order flexural modes are used with various number of transducers to determine sensitivity. Guided waves energy excited by multi transducer with focusing algorithm was successfully focused at a desired point.