• Journal of Sensor Science and Technology
• /
• v.11 no.5
• /
• pp.273-278
• /
• 2002

An intrusion-sensitive capability of multimode graded-index (GRIN) optical fibers under bending has been investigated. In this system, the data light is transmitted in the fundamental mode while alarm monitor light is launched in a high-order mode at the same time. An attempted intrusion to drain data by bending the fiber results in greater attenuation of a monitor signal in higher order modes, thereby setting off an alarm at the receiver. Light propagation in a multimode graded-index fiber is also analyzed theoretically when the fundamental mode is selectively excited and the fiber is bent around a constant radius mandrel. The bending generates coupling between the various modes of the fiber. Power transitions of the fundamental mode by changing the bending radius were also analyzed numerically using program simulation. It is shown that Asawa-Taylor model[4] is valid up to 1cm of the radius of curvature of the fiber bend.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1985.10a
• /
• pp.31-36
• /
• 1985

본 논문에서는 그레이더드인덱스 다중모드 광섬유에 압력을 가함으로써 발생되는 마이크로벤딩을 모드 결합 이론으로 분석하고, 그 이론에 의해 모드결합이 최적으로 일어나는 정적벤딩을 통한 주기성을 얻어 시제품 광섬유 음향 트렌스튜서를 설계 및 그것을 이용한 광섬유음향센서를 제작하였다. 제작된 트랜스튜서의 탐지가능한 최소검출압력을 정적벤딩 실험을 통하여 계산하였으며 아울러 제작된 광섬유음향트랜스듀서의 특성을 실험하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.15-19
• /
• 2004

We presented the holographic memory system using a multi-mode optical fiber. In this system, we multiplexed multiple holograms using the lights from multi-mode optical fibers as reference beams. The proposed system has two degrees of multiplexing freedom: speckle pattern of light coming from multi-mode fiber and spatial location of multi-mode fibers. Therefore, the data addressing in the system can be performed by mode and spatial multiplexings.

• The Journal of the Acoustical Society of Korea
• /
• v.5 no.1
• /
• pp.41-48
• /
• 1986

본 논문에서는 그레이디드 인덱스 다중모드 광섬유에 압력을 가함으로써 발생되는 마이크로벤딩 을 모드결합 이론으로 서술하였다. 그 이론에 의하여 모드결합이 최적으로 일어나는 정적벤딩을 통한 주기성을 얻어 시제품 광섬유 음향 트랜스듀서를 설계 및 제작하였다. 제작된 트랜스듀서의탐지 가능한 최소검출압력을 정적벤딩 실험을 통하여 계산하였으며, 아울러 제작된 광섬유 음향 트랜스듀서의 특성 을 실험하였다.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.252-259
• /
• 2022

We have conducted a study to control the light-intensity distribution at the output end of a multimode optical fiber via estimating the transmission matrix. A circularly arranged Hadamard eigenmode phase distribution was implemented using a spatial light modulator, and the transmission matrix of a multimode optical fiber was experimentally obtained using a four-phase method. Based on the derived transmission matrix, the spatial phase distribution of light incident upon the optical fiber was adjusted via the spatial light modulator in advance, to focus the light at a desired position at the optical fiber output. The light could be focused with an intensity up to 359.6 times as high as that of the surrounding background signal at a specific position of the multimode fiber's output end, and the intensity of the focused beam was on average 104.6 times as large as that of the background signal, across the area of the multimode fiber's core.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.216-217
• /
• 2001

광섬유와 평면 도파로를 결합한 도파로 구조에서 광 결합 현상은 다양한 응용 가능성 때문에 이론적으로 또는 실험적으로 많은 연구가 되어오고 있다. 광섬유는 단일모드를 이용하고 적당한 곡률이 주어진 블록에 고정한 후 연마하여 클래딩의 일부를 제거하고, 그 상부에 다중모드 평면 도파로(Multi-Mode Overlay Waveguide; MMOW)를 구성한다. 제작된 결합기 구조에서 평면 도파로는 광섬유의 감쇠장 결합(Evanescent field coupling)을 유도하게 되므로, 소자의 특성은 평면 도파로의 구조와 조건에 의해 결정된다. (중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.6
• /
• pp.296-307
• /
• 1985

The reults of the interlaboratory measurement comparison of the multimode and single mode fiber papameters are reported. 7 multi-mode fiber spools and 4 single mode spools are used and 5 independent domestic organizations (ETRI & 4 optical fiber manufacturing companies) are participated in the comparison study. Our results are compared with those of the comparison studies conducted in the foreign countries.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.218-219
• /
• 2001

본 실험에서는 RF 소자들과 650 nm InGaAIP FP LD를 사용하고 이득스위칭에 의하여 선폭이 35psec 되는 극초단 광펄스를 생성하였다. 또한 이렇게 생성된 극초단 광펄스를 이용하여 언덕형 굴절률 분포를 가지는 다중모드 광섬유의 대역폭을 빠른 푸리에 변환(Fast Fourier Transform)으로 계산하였다 따라서 본 실험에서 이용된 언덕형 굴절률 분포를 갖는 다중모드 광섬유의 대역폭은 670 MHz.km로 측정되었다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.280-285
• /
• 2007

Based on the multimode fiber taper, a mode size converter for effective optical beam coupling between laser and optical fiber or between the two different optical fibers has been proposed and demonstrated. The device has a multimode input end and a single mode output end. The influence of various parameters, including device structure and launching conditions, on the coupling efficiency has been theoretically analyzed. The theoretical results revealed that the gaussian beam can be coupled into a single mode fiber without considerable insertion loss. The proposed multimode fiber taper has been fabricated using heating and pulling equipment incorporating two micro-torches. Experimental results showed that an optical beam with $50\;{\mu}m$ of large beam size was effectively coupled into single mode fiber through the multimode fiber taper. The insertion loss of the device was 1.3 dB.

• Korean Journal of Optics and Photonics
• /
• v.9 no.1
• /
• pp.25-30
• /
• 1998

In this paper, a simple scheme of optical interconnections between M input and N output terminals using mode speckle patterns generated in the mulitmode optical fiber is described. It is shown that fully parallel nonblocking interconnections are accomplished by using properly generated mode speckle patterns as destination codes and dectecting the generated mode speckle patterns separately using M multiplexed Vander Lugt matched filters at each output terminal. The orthogonality condition of mode speckle patterns is investigated by either changing the launching angles or rotating the polarization direction of the beam. Preliminary experiments by use of a 4$\times$4 graded refractive-index multimode fiber coupler whose core diameter was 50 ${\mu}{\textrm}{m}$ were performed to show the feasibility of our scheme.