• Tuberculosis and Respiratory Diseases
• /
• v.44 no.5
• /
• pp.1072-1082
• /
• 1997

Background : To characterize the clinical features and determine the prognostic factors of severe community-acquired pneumonia. This study is the first of its kind in Korea. Methods : Recruited were 40 patients diagnosed as severe community-acquired pneumonia in Hallym University Hospital from January 1, 1989 through July 31, 1996. Patients were analysed retrospectively for age, sex, underlying disease, respiration rate, hypoxemia, requirement of mechanical ventilation, involvement on chest radiograph, shock, and the serum concentration of BUN and albumin. All parameters were compared between survived and dead group. Results : Male to female ratio was 2.07 : 1. The mean age was $63.1{\pm}17.5$years(range 25~90years) with 65% of patients aged equal to or more than 60. The major underlying diseases were old pulmonary tuberculosis(12.5%), chronic obstructive pulmonary disease(7.5%), bronchial asthma(5%), bronchiectasis(2.5%), and diabetes mellitus(22.5%). Microbiologic diagnosis was made in 26 out of 40 patients(65%). The most common causative organism was S. pneumoniae(17.5%, 7/40) followed by S. aureus(15.0%, 6/40), K. Pneumoniae(12.5%, 5/40), M. tuberculosis(7.5%, 3/40), H. influenzae(2.5%, 1/40), coagulase negative staphylococcus(2.5%, 1/40), P. aeruginosa(2.5%. 1/40), E. cloaceae(2.5%, 1/40), and E. coli(2.5%, 1/40). M. pneumoniae was detected in no patient. The most frequent drugs administered in single or combination therapy were aminoglycosides(75%, 30/40), second- and third-generation cephalosporin(40%, 16/40 and 27.5%, 11/40), macrolides(27.5%, 11/40), and amoxicillin/clavulanic acid(22.5%, 9/40). Of the 40 patients, 14 died of severe community-acquired pneumonia(37.5%). Among them, seven patients (50%) expired within 72h of hospital arrival. According to multivariate analysis, mortality was significantly associated with requirement of mechanical ventilation, bilateral pulmonary involvement, and serum albumins$\leq$3.0g/dl. Conclusion : An understanding of the clinical characteristics and prognostic factors in severe community-acquired pneumonia identified in this study will optimize therapeutic approach in this disease and help decreasing its notorious mortality rate.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.327-333
• /
• 2014

BACKGROUND: Rabbiteye blueberry(Vaccinium ashei) is one of the most widely grown blueberry types in the world, together with Northern and Southern highbush blueberry(Vaccinium corymbosum). Rabbiteye blueberry have higher soil adaptability and fruit productivity but less cold tolerance to low temperature than highbush blueberry. The objective of this study is to investigate freezing tolerance of floral buds and establish a cultivation zone for rabbiteye blueberry cultivars. METHODS AND RESULTS: Bearing branches which have similar thickness and same number of floral buds were collected in the early January at the blueberry germplasm preservation plot located in Namhae Sub-station, National Institute of Horticultural and Herbal Science in Gyeongsangnamdo. Cold response of bearing branches were investigated by electrolyte leakage and freezing tolerance of floral buds were determined by ovary browning ratio of 50%($LT_{50}$). Cultivation zone was established based on mean annual extreme minimum temperature for 30 years, from 1981 to 2010. The electrolyte leakage of bearing branches in rabbiteye blueberry increased as temperature decreased and was lowest in 'Brightwell' but highest in 'Bluegem' when they were kept in $-5^{\circ}C$. Besides, the electrolyte leakage increased in 'Brightblue', 'Brightwell', 'Climax', 'Delite', 'Gardenblue', 'Southland' and 'Woodard' in $-20^{\circ}C$. Freezing tolerance($LT_{50}$) was lowest in 'Bluegem' and 'Homebell'($-13.3^{\circ}C$), and highest in 'Tifblue'($-25^{\circ}C$) among different rabbiteye blueberry cultivars. $LT_{50}$ of 'Southland' was from -15.0 to $-16.7^{\circ}C$, that of 'Delite', 'Brightwell',' Austin' and 'Climax' was $-18.3^{\circ}C$, and that of 'Bluebelle', 'Woodard' and 'Powderblue' was $-20^{\circ}C$. CONCLUSION: This study indicate that The hardiness zones of rabbiteye blueberry were classified into Six cultivation zones and cultivation zones of most cultivars were the south of Jeollanam-do and Gyeongdangnam-do, except for 'Tifblue.'

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.4
• /
• pp.253-258
• /
• 2002

NC+4880, a forage com hybrid, is bred by NC+hybrids Co. in US, and Gast 8396 IT is by Garst Seeds Co. We have tested these two cultivars in Suwon and Chonan over three years to test their regional yield trial. Through above experiments, the excellence is testified, in result, they are determined as new recommended cultivars by NACF. The main characteristics of these cultivars are as tallows ; 1. NC+4880 a. The seed coat is yellow, the mean tasseling date is 7th of July and it takes about 74 days from emergence to tasseling date. This hybrid is a day ahead and the culm length is 242 cm, moreless shorter comparing with a check hybrid, Suwon 19. The ear height 117 cm which is short and its stay green is moderate. b. It shows resistance to H maydis, and MBSDV is barely observed and its stay green is moderate. c. The fresh yield, dry matter yield, and TDN yield per a ha are 55.4 tons, 18.3 tons, 12.4 tons, respectively, which are increased by 6%, 7%, and 9%, respectively, comparing with a check hybrid, Suwon 19. The percent ear among total dry matter yield is 50.9%. 2. Garst 8396 IT a. The seed coat is yellow, the mean tasseling date is 9th of July and it takes about 76 days from emergence to tasseling date. This hybrid represent a day delayed compared with a check hybrid, Suwon 19. The Culm length and the ear height are 275 cm, and 138 cm, respectively. b. It resists moderately to H. maydis, and highly resists to lodging in the field conditions. MBSDV is barely observed and its stay green is moderate. c. The fresh yield per a ha is 64.9 tons, dry matter yield, 20.9 tons, and TDN, 13.8 tons, respectively, which are increased by 25%, 23%, and 22% comparing with a check hybrid, Suwon 19. The percent ear among total dry matters is 43.3%.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.81-92
• /
• 2001

According to analyses of high-resolution seismic profiles (air gun, sparker, and SBP) and a deep-drill core(YSDP 105) in the mid-eastern Yellow Sea, stratigraphic and geoacoustic models have been established and seismo-acoustic modeling has been fulfilled using ray tracing of finite element method. Stratigraphic model reflects seismo-, litho-, and chrono-stratigraphic sequences formed under a significant influence of Quaternary glacio-eustatic sea-level fluctuations. Each sequence consists of terrestrial to very-shallow-marine coarse-grained lowstand systems tract and tidal fine-grained transgressive to highstand systems tract. Based on mean grain-size data (121 samples) of the drill core, bulk density and P-wave velocity of depositional units have been inferred and extrapolated down to a depth of the recovery using the Hamilton's regression equations. As goo-acoustic parameters, the 121 pairs of bulk density and P-wave velocity have been averaged on each unit of the stratigraphic model. As a result of computer ray-tracing simulation of the subsurface strata, we have found that there are complex ray paths and many acoustic-shadow zones owing to the presence of irregular layer boundaries and low-velocity layers.

• The KIPS Transactions:PartD
• /
• v.14D no.1 s.111
• /
• pp.121-130
• /
• 2007

in a software development, the design or architecture prior to implementing the software is essential for the success. This paper presents a case that we successfully designed a software architecture of radiation monitoring system (RMS) for HANARO research reactor currently operating in KAERI by applying the quality attribute-driven design method which is modified from the attribute-driven design (ADD) introduced by Bass[1]. The quality attribute-driven design method consists of following procedures: eliciting functionality and quality requirements of system as architecture drivers, selecting tactics to satisfy the drivers, determining architectures based on the tactics, and implementing and validating the architectures. The availability, maintainability, and interchangeability were elicited as duality requirements, hot-standby dual servers and weak-coupled modulization were selected as tactics, and client-server structure and object-oriented data processing structure were determined at architectures for the RMS. The architecture was implemented using Adroit which is a commercial off-the-shelf software tool and was validated based on performing the function-oriented testing. We found that the design method in this paper is an efficient method for a project which has constraints such as low budget and short period of development time. The architecture will be reused for the development of other RMS in KAERI. Further works are necessary to quantitatively evaluate the architecture.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.435-444
• /
• 2001

Daily time series of longshore wind at 8 stations, sea surface temperature (SST) at 11 stations in the eastern coast of the Korean peninsula during $1983\~1997$ and the NOAA/AVHRR satellite data during $1990\~1998$ were used in order to study the temporal and spatial variations of the upwelling cold water which occurred in the summer season. The cold water occurred frequently in the eastern coastal waters of Korea such as Soimal, Kijang, Ulgi, Kampo, Pohang, Youngduk, Chukbyun, Chumunjin and Sokcho, During the upwelling cold water phenomenon, SST came down more than $-5^{\circ}C$ in a day. The maximum of the averaged RMS amplitude of daily SST was $5.8^{\circ}C$ along the eastern coast of Korea on Julian day 212 from $1983\~1997$. The cross correlation coefficients were higher than 0.5 between Sokcho and Chumunjin in the northern part of the East Sea, and along Soimal, Kijang, Ulgi, Kampo and Pohang in the southern part of the East Sea. In late July, 1995 the cold water occurred at Ulgi coastal area and extended to Ullung island which is located 250 km off the Ulgi coast. Even though the distance between Soimal and the Ulgi coast area is more than 120 km, the cross correlation coefficient related to the anomalies of SST due to upwelling cold water was the highest (0.7) in the southeastern coastal area of the Korean peninsula. This connection may be due to the cyclonic circulation of the Tsushima Current in this area and the topography of the ocean rather than the local south wind which induced the coastal upwelling.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.183-194
• /
• 2004

The existing management job of research expenses has been divided into three parts： budget planning, budget draw-up, and exact settlement of budget. However, it caused some problems. Under this current circumstance it is required to obtain research expenses steadily, to operate efficiently and to use them clearly to solve such problems. As a result of a study on data warehouse development process of existing system integration company (Inmon, IBM) to reflect current trend described above, data warehouse development process of Inmon uses systematic and gradual access as a classical development cycle method. It causes overlap and feedback to the previous step in the process of each step Is requested. And another problem that it is difficult to toil what function refers and corrects data because functions and data are separated during performing development process at data warehouse development process of IBM is caused. Integrated management data warehouse development process of research expenses in the enterprise environment which applies UML at planning and analysis step, design step and implement and test step is suggested in this paper. Information retrieval agent uses existing budget plan DB, budget draw-up DB and budget settlement DB to find out information that a user wants to know. Information retrieval agent collects and saves information at integration database and information integration agent extracts, transports, transforms and loads the data. Information integration agent reduces a user's efforts to access to a number of information sources and check each of them. It also screens out data that a user may not need. As a result, integrated management data warehouse development process of research expenses in the enterprise environment reflects a user's requirements as much as possible and provides various types of information to make a decision which is needed to establish the policy of research expense management. It helps an end user approach his/her desired analysis information quickly and get various data from the comprehensive viewpoint rather than the fragmentary viewpoint. Furthermore, as it integrated three systems into one, it is possible to share data, to integrate the system, to reduce operating expenses and to simplify supporting environment for the decision making.

• Health Policy and Management
• /
• v.20 no.1
• /
• pp.103-124
• /
• 2010

Objectives: The out-of-pocket payment (OOP) of the Industrial Accident Compensation Insurance (IACI) in Korea was investigated empirically in terms of its incidence, magnitude and factors influencing them. Methods: The subjects were sampled with stratified, randomized methods among medical institutions of which the number of monthly IACI claims exceeded its median as of May 2008. Out of 204 institutions selected, 118 institutions (57.8%) responded to this survey. A total of 24,826 episodes(2,457 inpatient and 22,369 outpatient episodes) were included in this analysis. The incidence and magnitude of OOP of IACI were calculated by characteristics of institution as well as patient. Factors that affected the incidence and magnitude of OOP were investigated through multi-level analysis. Results: The overall incidence of OOP of IACI was 9.9% (25.6% for inpatient and 8.2% for outpatient) and the percentage of OOP among total expenditures was 8.3% on average (7.6% for inpatient and 26.8% for outpatient); 25.2% at traditional oriental medicine hospitals, 9.5% at general hospitals and 2.5% at the industrial-accident-designated medical institutions. The incidence of OOP of IACI was influenced by hospital size, ownership, longer duration of designation (over 5 years) and length of stay. On the other hand, its magnitude was influenced by medium-sized hospital, public hospital, location of large city and length of stay. Extra charges for upper grade room which accommodates less than 4 patients and treatment by specialists were the leading contributors to the magnitude of OOP of IACI. Conclusion: The incidence and magnitude OOP of IACI varied in institution type and were influenced by both institutional and patient's factors. In order to achieve the goal of Industrial Accident Compensation Insurance, appropriate level of compensation, that is, no incidence of OOP, for accident and disease of workers, it is necessary to take measures to reduce incidence and magnitude of OOP.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.867-879
• /
• 2016

Since the 1970s, the region of its own pedestrian center and environmental pollution caused by exhaust gases have been reduced gradually in a continuous increase of the vehicle, school route the central business district, around the school, the sidewalk where the vehicle do not pass, facilities of minimum for the safety of pedestrians and systematic management of an area where an unspecified number and alleys impassable is insufficient. Recently, in response to the "Law for convenience enhancing safety and walking" is enforced in Korea, research on Pedestrian only Street has been actively about the government, the standard for calculating the weights of evaluation associated with it. it is a actuality, however, there are insufficient, evaluation for business promotion is being conducted evaluation polite manner by using, for example, scale residence time and purpose of the passengers as there is no car that has been carried out on a voluntary basis through the municipality have. In this study, by suggesting a method for the selection of the street without a car, make a survey by placing a purpose in the selection method presentation of the street with no car to be construction future, was researching. F.G.I (Focus Group Interview) survey, professors, staff in urban, traffic field of experts in order to present the weights for the evaluation of the Pedestrian only Street by using the evaluation index by type of Pedestrian only Street, was interviewed about the evaluation index for the conducted for professionals engaged in the engineering company, and randomly selected 200 peoples, weighted evaluation of the street with Pedestrian only Street was proposed. By classifying the items purpose and goals of the evaluation type by this by applying the weight, and present the weight of the detailed indicators each corresponding to each item, and scored on the basis of the result, in this paper it can be so that one methodology for the selection standard for the construction as Pedestrian only Street, and the weight of the evaluation of the type that has been derived, the selection and evaluation methods and then added to these criteria to settle careful study of the reference should be performed further.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.664-672
• /
• 2004

Widespread popularity of wireless data communication devices, coupled with the availability of higher bandwidths, has led to an increased user demand for content-rich media such as images and videos. Since such content often tends to be private, sensitive, or paid for, there exists a requirement for securing such communication. However, solutions that rely only on traditional compute-intensive security mechanisms are unsuitable for resource-constrained wireless and embedded devices. In this paper, we propose a selective partial image encryption scheme for image data hiding , which enables highly efficient secure communication of image data to and from resource constrained wireless devices. The encryption scheme is invoked during the image compression process, with the encryption being performed between the quantizer and the entropy coder stages. Three data selection schemes are proposed： subband selection, data bit selection and random selection. We show that these schemes make secure communication of images feasible for constrained embed-ded devices. In addition we demonstrate how these schemes can be dynamically configured to trade-off the amount of ded devices. In addition we demonstrate how these schemes can be dynamically configured to trade-off the amount of data hiding achieved with the computation requirements imposed on the wireless devices. Experiments conducted on over 500 test images reveal that, by using our techniques, the fraction of data to be encrypted with our scheme varies between 0.0244％ and 0.39％ of the original image size. The peak signal to noise ratios (PSNR) of the encrypted image were observed to vary between about 9.5㏈ to 7.5㏈. In addition, visual test indicate that our schemes are capable of providing a high degree of data hiding with much lower computational costs.