• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.41-42
• /
• 2009

천연가죽 제조 공정에서 유해성 금속성 성분인 크롬이 전혀 함유되지 않은 비크롬 가죽을 제조한 후에 염색 공정에서 다색성 염료인 오배자와 소목을 각각 원료피 무게대비 5%를 사용하고, 매염제를 2~3% 사용하여 염료의 흡착성 증대, 음이온성 가지제 10~12%를 사용하여 가죽에 유연성 및 매염제의 표면 흡착성 증대를 통해서 천연염료에는 존재하지 않는 블랙색상의 가죽을 제조하였다.

• Textile Coloration and Finishing
• /
• v.2 no.2
• /
• pp.43-50
• /
• 1990

색을 가지는 물질 즉 "색소" 란 인간의 눈에 시각으로서의 색을 인식 시키는 물질이다. 따라서 색소는 대상을 colorful하게 만들며 생활을 풍요롭게 하는데 필수불가결한 물질이다. 합성염료가 개발되기 이전부터 인간은 동물, 식물, 광물에서 색소를 추출해 사용해 왔다. 그러나 색소의 "색" 이외의 물성을 적극적으로 이용 할려고는 하지 않았다. 색소가 가지는 특성과 기능은 광흡수(색, 근적외 흡수, 다색성), 광방사(형광, 인광), 광 전도성, 가역변화(열, 광, pH), 화학 반응성 등이며, 이들의 특성과 기능이 색소를 광과 전자 분야에 관련되는 재료로 응용되게 유도 하였다.련되는 재료로 응용되게 유도 하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.8
• /
• pp.1484-1492
• /
• 2001

For the purpose of standardization and practicability of dyeing by natural dye, the mordanting and dyeing properties of Lithodpermum officinale were studied. Appropriate extraction, dveing and mordanting conditions of Lithodpermum officinale were determined, and the effect of mordanting no dye uptake and color fastness of dyed fabric was investigated. The maximum absorbances of Lithopermum officinale solution were at 521 and 561 mn, shikonin solution were 517 and 556 mn. According to the UV-VIS spectroscopy of shikonin solution showed batho chromic shift with the increase of temperature and the absorbance of shikonin solution increased with the increase of temperature. The color of Lithodpermum officinale solution was affected by pH 8∼9, they became dark, reduced reddish and bluish. The optimum conditions for extraction from Lithodpermum officinale were at 80$\^{C}$ and for 1 hour and at 25$\^{C}$ for 24 hours. And effective dyeing conditions with silk fabric were temperature at 80∼100$\^{C}$ and period for 60min. K/S value and color fastness of dyed fabrics were increased by mordanting treatment. In the case of Lithodpermum officinale light fastness was better than Sophora japonica, Gaesalpinia Sappan, Rhusjara,. Cochineal dyeing fabrics. Perspiration fastness of Lithodpermum officinale were good. Fastness of abrasion and dry-cleaning were good these fastness improvement were generatlly effected by post-mordanting treatment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.4
• /
• pp.590-597
• /
• 2013

This study examined the change in the dyeability of natural dyes on cotton fabrics by a PEI (polyethyleneimine) pretreatment instead of mordants. Cotton fabrics were treated with PEI and the changes in the dyeability were shown by measuring the amount of PEI on cotton fabrics. Samples treated with PEI were dyed with two natural polychromatic dyes with a different affinity to cotton fibers: Alizarin Red S and Curcumin. The changes in dyeability by three variables (time, temperature and concentration of dyes) on cotton fabrics were analyzed by the K/S value to define optimum dyeing conditions. Subsequently, the PEI treatment improved the dyeability of cotton fabrics with both dyes of low and high affinity to cotton fibers. Thus, PEI could be a suitable heavy metal mordant replacement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.9
• /
• pp.1301-1307
• /
• 2002

This paper surveys the mordanting and dyeing properties of Rubia akane Nakai appropriate extraction, dyeing and mordanting conditions of Rubia akane Nakai were determined, and the effect of mordanting method on dye uptake and color fastness of the dyed fabric was investigated. The optimum temperature to extract Rubia akane Nakai was during 1 hour in 8$0^{\circ}C$. The effective dyeing temperature and time of silk were 8$0^{\circ}C$, 1hour. The silk fabrics dyed with purpurin appeared red color, with alizarine appeared yellow-brown and with Rubia akane Nakai appeared yellow orange. K/S value of the dyeing fabrics was increased by pre-mordanting treatment. Mordant as Sn and Fe was better than anything else in K/S value. Mordanting treatment method affected color change of the dyed silk. In the case of Rubia akane Ntkai light fastness was increased by Fe and Al mordant treatment, Perspiration fastness of Rubia akane Nakai appeared more than 3 grades geneally. Fastness of abrasion and dry-cleaning appeared mon than 4～5 grades and these fastness improvement were generally effective for post-mordanting treatment.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.107-116
• /
• 2006

Korean entomopathogenic nematode strain were evaluated against white grubs, Popillia quadriguttata, Ectinohoplia rufipes and Phyllopertha diversa in laboratory. In addition we examined the efficacy of entomopatogenic nematode, Heterorhabditis sp. KCTC 0991BP strain against white grubs in Seaside Golf Club in Gimpo, Gyeonggii and persistence of entomopatogenic nematode in fairway of Anyang Benest Golf Club in Gunpo, Gyeonggii. In laboratory Heterorhabditis bacteriophora Hamyang strain showed 95% mortality against Popillia quadriguttata. H. bacteriophora Hamyang strain and Heterorhabditis sp. KCTC 0991BP induced 80% mortality against 3rd instar of Ectinohoplia rufipes. However, the letter showed only 60% mortality against Phyllopertha diversa. White grub density was reduced to 39% by the application of Heterorhabditis sp. KCTC 0991BP at the rate of $2.24{\times}10^9$ infective juveniles $ha^{-1}$ compared with control in Seaside Golf Club. Heterorhabditis sp. KCTC 0991BP persisted for two months at $5{\sim}10$ cm soil depth but not persisted at $0{\sim}5$ cm soil depth for the same periods when applied at the rate of $2.47{\times}10^9$ infective juveniles $ha^{-1}$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.2 no.1
• /
• pp.45-64
• /
• 1984

NiNH4PO4 was Prepared from waste Ni catalyst used in hydrogenation of oil and fat. NiNH4PO4 was calcined at different temperature respectly 800,100,100˚C to prepare Nickel yellow. The result from this experiment are summerizer as follows: 1) Nickel yellow formed at 1100˚C was most clearness yellow color from color analyzer date. 2) Nickel yellow was consist of -Ni2P2O2 Ni3(PO4)2 from X-ray diffraction analysis. 3) The endothermic pick at 100˚C and exotherwic pick about 1050˚C on calcination of NiNH4PO4 were checked in DTA (difference Thermal analysis data.)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.824-828
• /
• 2000

As production cycle has become more and more shorter, the demand of rapid prototyping technology has increased largely. There are many methods for rapid prototyping technology, such as SLA. SLS, FDM. INK JET, LOM and so on. Of all methods, SLA has been most widely used for fabricating precision parts. But products manufactured by this method have limitation of single color and single material. So the principal purpose of this study is to overcome the limit of single color product. If the internal structure of manufactured product is visible with multi-color characteristic, it is possible to check easily the designed model with reality. In order to give multi-color characteristic to the product, photocurable resin mixed with pigment is used in this study. First, transparency of photocurable resin without pigment is evaluated, and then color characteristic and curing characteristic of the mixture is evaluated changing mixing ratio. Through the basic experiments, it becomes possible to fabricate multi-color 3D prototype without assembly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.755-758
• /
• 2000

Rapid prototyping is one of the most important technology for 21th century industry. To overcome the limitation of the material and function, Functional Prototype Development(FPD) concept is newly proposed. Wide function is necessary such as mechanical, optical, chemical and electrical property in order to solve broad requirements of the industry. The process of FPD has more than two conventional processes based on fusion technology and the FPD system is integrated with the interdisciplinary, interfacing and intelligent concepts. This paper shows some representative achievements such as optic coloring prototypes, electric multi layer printed circuit broad(MLB) and MEMS using electrostrictive polymer. Finally, we confirmed that FPD has a great possibility which can be applied in broad industry and will be a powerful tool in near future.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.113-120
• /
• 2023

Restoring composite resins with the optimal shades for all primary teeth is a great challenge for pediatric dentists. A newly developed single-shade composite resin can exhibit a color similar to that of the surrounding tooth structure based on the structural color phenomenon. This study aims to evaluate the color adjustment potential (CAP) of a single-shade composite resin compared to conventional multi-shade composite resins in primary teeth. A single-shade composite resin and two conventional multi-shade composite resins were included in this study. Two types of specimens, a single specimen and a dual specimen, were evaluated. For single specimens, duplications of the primary second molar denture teeth were made using experimental composite resins. For dual specimens, cavities were prepared on the buccal surfaces of extracted primary second molars and restored with experimental composite resins. The L^*, a^*, and b^* values were measured using a colorimeter for the extracted teeth and specimens. The mean ΔE_ab^* values for single and dual specimens and CAP were calculated. Bonferroni post-hoc analysis was performed to confirm the statistical significance between the ΔE_ab^* and CAP values of the experimental resins. Among the single specimens, the single-shade composite resin showed significantly higher ΔE_Single compared to other composite resins (p < 0.0167). There was no significant difference between ΔE_Dual for all experimental resins. The single-shade composite resin showed highest CAP compared to other multi-shade composite resins. A single-shade composite resin exhibited the most prominent color adaptability compared to other conventional multi-shade composite resins for primary second molars. A single-shade composite resin can simplify shade matching and provide esthetic outcomes for the restoration of primary second molars.