• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.66-74
• /
• 1994

A loop-shaping LQ controller is synthesized for tandem cold mills. And a new loop- shaping technique is suggested for LQ controller design. The suggested loop-shaping LQ control system is compared with the standard loop-shaping LQ control system. The simulation results show that the theickness and interstand tension control accuracy of tandem cold mills can be improved by the compensated loop-shaping LQ controller.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.78-85
• /
• 2011

In order to design the control system of the magnetic bearing for the high speed 3 phase induction motor, the mathematical modeling was conducted and LQ regulator system was designed. When the plant is controllable and detectable, the nominal stability of LQ regulator could be guaranteed. However, LQ regulator doesn't ensure the robustness of stability and performance for the real system because LQ control is the mathematical optimal theory. In this paper to ensure the robustness of stability and performance for the real system, the control systems are designed by the simulation to the variation system parameters and this method was confirmed as an effective means.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.502-510
• /
• 1997

A disturbance rejection controller using eccentricity filtering and LQ control techniques is proposed to alleviate the effecto of major roll eccentricity in multivariable cold-rolling processes. Fundamental problems in multivariable cold-rolling processes such as process time delay inherent in exit thickness measurement and non-stationary characteristics of roll eccentricity signals can be overcome by the proposed control method. The filtered instantaneous estimate of roll eccentricity may be exploited to improve instantaneous estimate of the exit thickness variation based on roll force and roll gap measurements, and a feedforward compensator is augmented as a reference for a gaugemeter thickness estimator. LQ feedback controller is combined with eccentricity filter for the attenuation of the exit thickness variation due to the entry thickness variation. The simulation results show that the roll eccentricity disturbance is significantly eliminated and other disturbances also are attenuated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.248-254
• /
• 1996

A disturbance rejection controller using eccentricity filtering and LQ control techniques is proposed to alleviate significantly the effect of roll eccentricity in multivariable cold-rolling processes. Fundamental problems such as process time delay inherent in exit thickness measurement and non-stationary characteristics of roll eccentricity signals can be overcome by the proposed control method. The filtered instantaneous estimate of roll eccentricity may be exploited to improve instantaneous estimate of the exit thickness variation based on roll force and roll gap mearsurements, and a feedforward compensator is augmented as a reference for a gaugemeter thickness estimator. And, LQ feedback controller is combined with eccentricity filter for the attenuation of the exit thickness variation due to the entry thickness variation. The simulation results show that eccentricity components have been significantly eliminated and simultaneously other distrubances also have been attenuated.

• 전자공학회논문지SC
• /
• 제41권5호
• /
• pp.37-42
• /
• 2004

다변수 제어시스템의 최적 PI동조에 관한 연구는 난해하기 때문에 일반적인 방법으로 접근하기 힘들다. 본 논문에서는 다변수 시스템을 2-입력, 2-출력의 2차시스템을 고려하여 PI제어요소가 포함된 폐루프 상태방정식과 LQR의 폐루프 상태방정식의 관계를 유도하는 루프형성절차를 통해 주파수 영역 설계사양과 만족할 수 있도록 가격함수의 가중치 요소 Q와 R을 선정함으로써 성능 및 안정도-강인성이 보장되는 분산된 최적 강인 PI제어기 설계방법을 제안하고자 한다.

• 조명전기설비학회논문지
• /
• 제13권2호
• /
• pp.102-110
• /
• 1999

본 연구에서는 유전 알고리즘을 사용하여 복잡한 최적화의 과정이없이 가중치 행렬 Q, R을 동시에 최적화함으로써 상태변수들의 결합과 동작점의 변화에 따른 시스템의 파라미터 변동 등에도 불구하고 기준모델의 출력을 최적으로 추종하는 모델 추종형 제어 시스템을 설계법으로 제시하고 이를 보일러-터빈 설비를 위한 모델 추종형 다변수 제어 시스템의 설계에 적용하고자 한다. 또한 컴퓨터 시뮬레이션을 통하여 설계된 모델 추종형 제어 시스템의 성능을 비교고찰하고 그 유용성을 확인하다.

• 한국정밀공학회지
• /
• 제26권10호
• /
• pp.65-73
• /
• 2009

For mass production of printed electronics in roll-to-roll fashion, precision tension control is important to reduce register errors. Register error should be minimized within several to tens of microns for many electronic devices to be manufactured through printing technology. In order to achieve this goal, tension disturbance must be attenuated before printing process within a certain range. In this paper, a certain tension range which allows maintaining register error within 10 micron was defined with specific operating conditions. A LQG controller was proposed instead of the conventional PI controller for precision tension control using a multivariable feedback. A guideline to determine design parameters for calculating LQ gain was proposed. The proposed LQG controller was compared to both PI controller and LQ regulator with white noise by numerical simulations. Results showed that the proposed LQG controller was effective for attenuating tension disturbance with white noise.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.391-394
• /
• 1997

A H$_{\infty}$ control techniques with roll eccentricity filter is proposed to alleviate the effect of entry thickness variation and roll eccentricity occurred in rolling stand itself of tandem cold mills. A robust controller to the disturbances is designed using H$_{\infty}$ control techniques, which can reflect the input direction of disturbances and knowledge of disturbance spectrum in the frequency domain. And, non-standard H$_{\infty}$ control problem caused by selection of weight function having poles on j.omega. axis is discussed. The evaluation for the resultant controller composed by H$_{\infty}$ synthesis is done through computer simulations. The effectiveness of the proposed method is compared to those of the conventional LQ synthesis method and a feedforward controller against roll eccentricity, which was already studied.ied.

• 수산해양기술연구
• /
• 제25권1호
• /
• pp.18-23
• /
• 1989

최적제어이론은 -6유에서 무한대까지의 게인여유와 60$^{\circ}$의 위상여유, 그리고 원조건(Circle Condition)에 의해 보증되는 감도감소 등과 같은 로바스트성에 대한 긍정적인 면들을 가지고 있다. 이러한 결과는 전상태 피드백 경우일 때는 타당하지만, 실현문제에 있어, 관측기나 칼만필터가 사용되어질 경우에는 위의 조건이 완전히 만족하지 않는다. 본 논문에서는 관측기를 이용하여 다변수 제어계를 설계할 경우, 입\ulcorner출력부분에서 안정여유가 회복될 수 있도록 하는 하나의 방법을 제안했다. 플랜트 입력과 출력에서 LQ가 보증하는 최소안정여유는 K=1의 경우에서도 회복될 수 있음을 보였다. 로바스트성 회복을 위해 본 논문에서는 종래의 방법(K=$\infty$의 조건)과는 달리 유한값으로 하중행렬이 주어질 수 있으므로 본 방법은 하나의 명료한 로바스트성 회복법이라 할 수 있다. F=MC(or K=BM)를 만족하는 행렬 M이 존재하지 않을 경우, 그 해는 얻어질 수 없다. 그러나 K를 유한값으로 취했을 경우, 이 방법 이외의 또 다른 방법으로서는 입력과 출력에서 로바스트성 회복을 가지게 할 수 없을 것으로 생각된다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제13권2호
• /
• pp.234-234
• /
• 1999

The aim of this paper is to suggest a design method of the optimal model following control system using genetic algorithm (GA). This control system is designed by applying GA with reference model to the optimal determination of weighting matrices Q, R that are given by LQ regulator problem. The method to do this is that all the diagonal elements of weighting matrices are optimized simultaneously by GA, in the search domain selected adequately. And we design the model following control system to boi1er-turbine equipment by the proposed method. The model following control system designed by this method has the better command tracking performance than that of the control system designed by the trial-and-error method. The effectiveness of this control system is verified by computer simulation.