• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.460-460
• /
• 2017

본 연구에서는 규모가 비슷한 두 개 댐의 홍수조절 경향성과 영향을 시공간적으로 분석하고 하류에 미친 영향에 대해 조사하였다. 이를 위해 낙동강 유역의 안동댐과 임하댐을 선정하였다. 댐 하류에 위치하여 직접적인 영향을 받는 성주 수위관측소를 기준으로 하였다. 성주 수위관측소의 시작은 1995년 3월로, 이를 기준으로 2010까지의 31개 홍수 사상에 대해 홍수조절 능력과 영향을 검토하였다. 홍수사상의 관측치를 기준으로 한강홍수통제소에서 사용하고 있는 저류함수법을 활용하였다. 관측치에 대한 모의를 통해 매개변수를 최적화하고 이를 기준으로 자연상태의 홍수 발생량을 측정하였다. 성주 수위관측소를 중심으로 홍수 조절에 대한 댐 영향을 유역면적의 비와 홍수저감률의 관계로 분석하였으며 수위관측소의 평균저감률과 유역면적의 비와 비교하였다. 댐 운영에 따른 Resevoir Index (RI)를 활용하여 댐에 따른 하류지점에서의 영향성을 분석하였으며 홍수저감 효과를 분석하고 이를 한강유역에서 분석한 자료와 비교 분석하여 분석의 유사성을 통해 다른 유역에 대한 적용 가능성을 제시하고자 한다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.213-223
• /
• 2006

Conventional truss optimization approaches, while often sophisticated and computationally intensive, have been applied to simple, minimum weight-cost models. These approaches do not perform well when applied to real-world trusses, which have costmodels that are complex and which often involve multiple objectives. Thus, this paper describes the optimization strategies that a clustering technique, which identifies members that are likely to have the same product type, uses for the optimal design of truss structures with real- world cost functions that consider the costs on the weight of the truss, the number of products in the design, the number of joints in the structures, and the costs required in the site.At first, the clustering technique is applied to identify the members and to generate a proper initial solution. A simple taboo search technique is then used, which attempts to generate the optimal solution by starting with the solution from the previous technique. For example, the proposed approach is a plied to a typical problem and to a problem similar to relative performances. The results show that this algorithm generates not only better-quality solutions but also more efficient ones

• Water for future
• /
• v.15 no.2
• /
• pp.33-39
• /
• 1982

For the determination of a reservoir capacity Rippl's mass-curve method has long been used with the past river flow data assuming the same flow records will be repeated in the future. In this study the synthetic generation methods of thomas-Fiering type and harmonic analysis were used to synthetically generate 50 years of monthly river inflows to three single-purpose reservoris(Chuncheon, Chungpyong, Hwacheon) and three multi-purpose reservoirs(Soyany, Andon, Daichung). The generated sequences of monthly flows were analyzed based on the range concept, and hence the so-determined ranges for single-prupose and multi-purpose rewervoirs were correlated with the number of monthly flow subseries, resulting an empirical equation of the Feller's type. (1) Single-purpose reservoir $$R_n=2.8357 I\sqrt{n}$$ (2) Multi-purpose reservoir $$R_n=2.5145 I\sqrt{n}$$ where, $R_n$:Range(㎥/S-M) n:periodic(12 months, ……120 months) I:Input mean(㎥/S-M) In Korea, the monthly inflow data generation will be fit to the Thomas-Fiering type, and this paper shows that the periodic range is easily calculated without the Rippl's mass-curve method as shown above formula.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.2
• /
• pp.115-127
• /
• 2020

In this paper, a sustainable close-loop supply chain (SCLSC) model is proposed for effectively managing the production, distribution and handling process of mobile phone. The proposed SCLSC model aims at maximizing total profit as economic factor, minimizing total CO₂ emission amount as environmental factor, and maximizing social influence as social factor in order to reinforce sustainability in it. Since these three factors are represented as each objective function in modeling, the proposed SCLSC model can be taken into consideration as a multi-objective optimization problem and solved using a hybrid genetic algorithm (HGA) approach. In numerical experiment, three different scales of the SCLSC model are presented and the efficiency of the HGA approach is proved using various measures of performance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.310-310
• /
• 2017

홍수추적 모형의 적절성을 결정하는 중요한 요소 중 하나는 모형의 매개변수이다. 특히 자연하천에 관한 부정류 계산모형의 매개변수인 조도계수는 하상재료의 특성에 따라 좌우되는 표피마찰뿐만 아니라 하상의 굴곡 등 단면형의 변화에 따른 형상손실 및 하천의 사행에 따른 손실 효과 등을 포괄적으로 내포하고 있기 때문에 모든 하천구간에 대하여 일반적으로 적용할 수 있는 조도계수의 값을 하나로 결정하기는 어렵다. 또한 조도계수는 흐름조건, 즉 유량 또는 수위의 변화에 따른 가변성을 갖고 있기 때문에, 흐름이 시간 및 공간적으로 변화하는 부정류 계산모형에 있어서는 더욱 그러하다. 그러므로 본 연구에서는 조도계수의 가변성과 다수 지점의 관측치를 고려한 모형보정의 결과로부터 얻은 파레토 최적화와 최소최대 후회도 방법(Minimax regret approach, MRA)을 결합하여 부정류 계산모형의 안정적인 매개변수를 선정할 수 있는 방법을 제안하였다. 여러 지점의 관측치를 고려한 모형의 보정은 다목적 최적화 문제로서, 여러 지점에 대한 가중치를 결합하여 얻은 하나의 목적함수에 대하여 여러 번의 개별 최적화를 수행함으로써 다수의 파레토 최적해들을 구할 수 있는 통합접근법을 적용하였다. 이때 유량에 따른 조도계수의 가변성을 나타내는 두 개의 매개변수로 구성된 관계식을 이용하여 두 구간에 대한 매개변수들을 모형의 추정 대상 매개변수로서 최적화하였다. 이 후 각기 다른 홍수사상에 대해 보정과 검증을 수행하였으며 각각에 대한 평가지표의 후회도를 정량화하였고 최종 안정적인 매개변수를 추정하기 위해 MRA를 이용하여 종합적인 순위를 도출하였다. MRA는 완전히 불확실한 의사결정 상황에서 유용한 방법으로 알려져 있는데 가장 나쁜 순위가 가장 좋은 것을 선택할 수 있게 하는 보수적인 의사결정기법이다. 계산결과 추정된 모형의 가변조도계수와 그로부터 얻은 두 개 지점에서의 평가지표인 RMSE는 두 지점에 대한 가중치의 조합에 따라 선택되는 매개변수 값에 따라 달라짐을 알 수 있었다. 본 연구에서 제시한 방법은 수문 및 수리모형의 다수의 관측지점의 자료를 이용한 매개변수 산정문제에 있어서 안정적인 해를 도출할 수 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.17-34
• /
• 2022

This paper develops a model for dynamic station assignment to optimize the Demand Responsive Transit (DRT) operation. In the process of optimization, we use the bus travel time as a variable for DRT management. In addition, walking time, waiting time, and delay due to detour to take other passengers (detour time) are added as optimization variables and entered for each DRT passenger. Based on a network around Anaheim, California, reserved origins and destinations of passengers are assigned to each demand responsive bus, using K-means clustering. We create a model for selecting the dynamic station and bus route and use Non-dominated Sorting Genetic Algorithm-III to analyze seven scenarios composed combination of the variables. The result of the study concluded that if the DRT operation is optimized for the DRT management, then the bus travel time and waiting time should be considered in the optimization. Moreover, it was concluded that the bus travel time, walking time, and detour time are required for the passenger.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.1
• /
• pp.49-62
• /
• 2024

In this paper, a sustainable closed-loop supply chain (SCLSC) network model is proposed for domestic mobile phone industry. Economic, environmental and social factors are respectively considered for reinforcing the sustainability of the SCLSC network model. These three factors aim at minimizing total cost, minimizing total amount of CO₂ emission, and maximizing total social influence resulting from the establishment and operation of facilities at each stage of the SCLSC network model. Since they are used as each objective function in modeling, the SCLSC network model can be a multi-objective optimization problem. A mathematical formulation is used for representing the SCLSC network model and a hybrid meta-heuristic approach is proposed for efficiently solving it. In numerical experiment, the performance of the proposed hybrid meta-heuristic approach is compared with those of conventional meta-heuristic approaches using some scales of the SCLSC network model. Experimental results shows that the proposed hybrid meta-heuristic approach outperforms conventional meta-heuristic approaches.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.1-11
• /
• 2010

The provision of warning information on upcoming hazards leading to potential crash occurrence is a significant countermeasure to prevent crashes on the highway. This study presents a methodology for selecting more effective warning messages using a multi-criteria value function. The understandability, preference level, and message reading time were used as measures of effectiveness (MOE) for messages. Expert judgements were incorporated into the value function by analytical hierarchical process (AHP) technique. Field experiments to evaluate the warning messages were conducted in a testbed section on the Jungboo-Naeryuk freeway. The proposed methodology would be a useful tool to support the design of various traffic information messages.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.433-441
• /
• 2011

The optimization of a centrifugal compressor was conducted. The ANN (Artificial Neural Network) was adopted as an optimization algorithm, and it was learned and trained with the DOE (Design of Experiment). In the DOE, it was predicted the main effect and the interaction effect of design variables to the objective function. The ANN was improved in the optimization process using the GA (Genetic Algorithm). When any output at each generation was reached a standard level, it was re-calculated by the CFD (Computational Fluid Dynamics) and it was applied to develop a new ANN. After 6th generation, the prediction difference between ANN and CFD was less than 1%. A pareto of the efficiency versus the pressure ratio was obtained through the 21th generation. Using this method, the computational time for the optimization was equivalent to the time consumed by the gradient method, and the optimized results of multi-objective function were obtained.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.557-567
• /
• 2016

In this study, the optimal design of heat exchangers, including the evaporator and condenser of a solar-heating ocean thermal energy conversion (SH-OTEC), is investigated. The power output of the SH-OTEC is assumed to be 100 kW, and the SH-OTEC uses the working fluid of R134a and high-performance commercial tubes. The surface heat transfer area and the pressure drop were strongly dependent on the number of tubes, as well as the number of tube passes. To solve the reciprocal tendency between the heat transfer area and pressure drop with respect to the number of tubes, as well as the number of tube passes, a genetic algorithm (GA) with two objective functions of the heat transfer area (the capital cost) and operating cost (pressure drop) was used. Optimal results delineated the feasible regions of heat transfer area and operating cost with respect to the pertinent number of tubes and tube passes. Pareto fronts of the evaporator and condenser obtained from multi-objective GA provides designers or investors with a wide range of optimal solutions so that they can select projects suitable for their financial resources. In addition, the surface heat transfer area of the condenser took up a much higher percentage of the total heat transfer area of the SH-OTEC than that of the evaporator.