• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.64-72
• /
• 2007

Under the AE methods, the valid condition analysis and evaluation the leak etc, resulted by the AE signal pattern on the bottom plate of ground tank at full. In next more, the gradient of accumulation amplitude distribution analysis and comparison the energy, count, and duration time that noise of EMI signal were removed. EMI signal showed height-energy, count, and duration time, it also appeared great gradient of accumulation distribution. Then, with the pure remaining AE signals cluster analysis and location. It would possibly assume of damage with corrosion. Total cluster 20 and energy showed between the maximum 11,990 and 8,565 which is much lower than above figure and event number showed from 8 to 5. Even when it difficult to certify damage by open, as it is raised higher height-sensitivity and threshold by 60 dB. It would possibly presume of location source more accurately.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.165-172
• /
• 2022

This paper proposes a method to derive the time points for helpful intervention based on conclusions drawn from a previous study which collected data during barista training performed by students with developmental disabilities. To identify this intervention time, this study utilized distance information between the hand of a student and each barista tool in a virtual reality space. If the cumulative distance from a student's hand to the key barista tool is relatively longer than the cumulative distance to other barista tools, it is highly likely that the student is not using the key barista tool, which must be used to successfully complete the given task. In other words, the distance information signals the task is not being properly performed and represents the intervention time to help the student. As a result of verifying a hypothesis through statistical analysis, this study found that the relationship between the success or failure of a student's training and the cumulative distance between the student's right hand and the key barista tool was statistically significant, but not for the left hand.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.65-71
• /
• 2006

There has been equipped wireless network infrastructure making possible to contact mobile computing at buildings, university, airport etc. Due to increase of mobile user dramatically, it raises interest about application and importance of LBS. The purpose of this study is to develop an indoor positioning system which is position of mobile users using Wireless LAN signal strength. We present Euclidean distance model and Bayesian inference model for analyzing position determination. The experimental results showed that the positioning of Bayesian inference model is more accurate than that of Euclidean distance model. In case of static target, the positioning accuracy of Bayesian inference model is within 2 m and increases when the number of cumulative tracking points increase. We suppose, however, Bayesian inference model using 5- cumulative tracking points is the most optimized thing, to decrease operation rate of mobile instruments and distance error of tracking points by movement of mobile user.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1312-1318
• /
• 2006

One of the common services of telematics is the car navigation that finds the shortest path from source to target. Until now, some routing algorithms of the car navigation do not consider the real-time traffic information and use the static shortest path algorithm. In this paper, we prosed the method to predict the traffic flow in the future. This prediction combines two methods. The former is an accumulated speed pattern, which means the analysis results for all past speeds of each road by classfying the same day and the same time inteval. The latter is the Kalman filter. We predicted the traffic flows of each segment by combining the two methods. By experiment, we showed our algorithm gave better precise predicition than only using accumulated speed pattern that is used commonly. The result can be applied to the car navigation to support a dynamic shortest path. In addition, it can give users the travel information to avoid the traffic congestion areas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1158-1166
• /
• 2013

SAR calculation method following the Mobi-Kids study protocol is analyzed and evaluation method of cumulative RF dose from mobile phones which have been used by a subject of case and control groups is proposed. An SAR database is built by calculating SAR distributions in 4 head models at different ages for representative phone models with the same conducted power. To obtain SAR distribution in a subject's head for a specific commercial phone which had/have been used by him/her, an SAR correction factor using SAR compliance test results is determined. Cumulative dose is calculated by considering mobile phone characteristics and use pattern such as call time and laterality(right and left).

• Journal of Bio-Environment Control
• /
• v.21 no.1
• /
• pp.74-78
• /
• 2012

This research was carried out to investigate the shoot growth characteristics and climatic factors for early harvest and stable yield by greenhouse on mulberry ($Morus$ $alba$) in Buan-gun, Jeollabuk-do. Budbreak and coloring date of mulberry in greenhouse were earlier 18~19 days than those in field, and from bud-break to coloring was 39 days in both cultivation types. Shoot length and fruit number per shoot of mulberry in greenhouse were not significantly different with those of field, but number of node was significantly little than that of field. For 39 days in greenhouse, weekly cumulative radiation were 0.3~0.8 times. But weekly cumulative temperature was not different with that of field. And relative humidity as range of 53.0~94.5% in greenhouse was higher than that of field. Therefore, mulberry is suitable to greenhouse cultivation for early harvest and stable yield.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.455-470
• /
• 2001

This paper is focused on the traffic characterization for the efficient transmission of the VBR video source in the ATM network. For the traffic characterization, low traffic monitoring technique is applied and the dynamic VBR characterization method is suggested to satisfy the delay requirement. The dynamic VBR method uses the token bucket algorithm buffering though Cumulative Constraint Function. According to the Cumulative Constraint Function, the packet initially started transferring at the peak rate and the token bucket provided proper amount of buffer for traffic after a certain period of monitoring. It also reduced the network resource bandwidth through renewal of the cumulative frame and changed the rate from the previous frame information. It requires only small amount of monitoring and causes little overhead. In addition, it lowered the complexity of Deterministic Constraint Function to 0(n) and mapped the token rate and token depth to the token bucket. This study shows less network resource consumed than the previous method, comparing and analyzing the result of simulations.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.447-454
• /
• 2010

The defects of rail head induced by fatigue and deterioration are mainly classified by two types ; one occurred on the surface of rail head the another occurred on the inner rail head. This study performed the surface irregularity measurement of rail head according to the passing tonnage in the urban railway. Also, we carried out microscopic structure test, chemical component test and micro-hardness test for the specimen which is the used rail on metro line by accumulated passing tonnage. As a result of this study, for new rail, it should be performed initial grinding in order to remove 0.3mm of de-carbonized layer. The preventive-cyclic grinding for preventing RCF defects is proposed two options : grinding by the whole line and grinding by specified sections.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.95-101
• /
• 1999

When a metal oxide field effect transistor (MOSFET) is exposed to ionizing radiation, electron/hole pairs are generated in its oxide layer. The slow moving holes of them are trapped in the oxide layer of p-MOSFET and appear as extra charges that change the characteristics of the transistor. The radiation-induced charges directly impact the threshold (turn-on) voltage of the transistor. This paper describes the use of the radiation-induced threshold voltage change as an accumulated radiation dose monitoring sensor. Two kinds of commercial p-type MOSFETS were tested in a Co-60 gamma irradiation facility to see their capabilities as a radiation dosimeter. We found that the transistors showed good linearity in their threshold voltage shift characteristics with radiation dose. The results demonstrate the potential use of commercial p-MOSFETS as inexpensive radiation sensors for the first time.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.12-21
• /
• 2001

Recently, as work strength is deepened, as well, labor environments is changed, simple and iterative worker's Cumulative Trauma Disorders(CTD) is gradually being increased. Accordingly, this study was designed to represent its system design to carry out their iterative and simple task by machine through the difference of muscle fatigue between worker on handling line and worker under the work environments by Air Balance System for the purpose of analyzing their muscle fatigue test according to fulfillment of iterative and simple task. From the result of this study, with regard to the comparison of muscle fatigue between work on handling line and work on automation line on the occasion of refractory brick loading, their muscle fatigue extent under the work environments by Air Balance system was lower than it of handling by AMEG(64.1%), MF(65.3%), MPF(64.3%), ZCR(63.6%) respectively. And also, generally there showed similar transfer at the aspect of muscle mobilization. In other words, we can say that work environments by Air Balance System is beneficial at the aspect of alleviating works' fatigue extent on handling line. As well, the result of this study shows that worker's exposure to Cumulative Trauma Disorders(CTD) is relatively low.