• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.3
• /
• pp.117-124
• /
• 2023

Through reorganization in 2008, The ministry of Agriculture, Food and Rural Affairs integrated management of the food industry by transferred functions which was scattered in the Ministry of Health and Welfare, and established comprehensive policies covering the primary, secondary, and tertiary industries. In the agricultural industry sector, new business concepts such as smart farm and food tech have recently emerged alongside the fourth industrial revolution. In order for the Ministry of Agriculture, Food, and Rural Affairs to develop appropriate policies for the fourth industrial revolution, it is necessary to accurately estimate the size of agricultural and livestock-related businesses. In 2017, the Ministry of Agriculture, Food, and Rural Affairs initiated research for the agriculture, livestock and food industry's special classification, which was approved by the National Statistical Office in 2020. The estimation of the agriculture, livestock and food industry's size based on special classification is crucial because it has a substantial impact on the formulation and significance of policies. In this paper, the appropriate rate was derived from samples extracted from the special classification and the Korean standard industrial classification. Proposed are a method for estimating the population of the agricultural and livestock food industry, as well as a method for calculating the appropriate rate that more accurately reflects the population than the method currently in use.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.2
• /
• pp.79-86
• /
• 2016

The purpose of this study is to efficiently improve biological sequencing batch reactor (SBR) system of high-concentrated nitrate nitrogen in reverse osmosis (RO) concentrates by total dissolved solids (TDS) regulation. Since a laboratory-scale SBR system had been operated, we had analyzed specific denitrification rate (SDNR) and specific oxygen uptake rate (SOUR) for microbial activity in according to various injection concentration of TDS. As a result, higher injection concentration of TDS decreased SDNR, and delayed denitrification within denitrification process. Moreover, the higher injection concentration of TDS was, the lower microbial activity was during operation of laboratory-scale SBR system. Therefore, the regulation of TDS injection concentration is necessary to improve efficiency of nitrate nitrogen in the biological SBR system, and treatment of calcium ion ($Ca^{2+}$) is also specifically focused to remove nitrate nitrogen. Moreover, analytical data of SDNR and SOUR can be the effective kinetic design parameters to application of biological treatment of RO concentrate by aerobic granular sludge (AGS).

• The Korean Journal of Community Living Science
• /
• v.15 no.4
• /
• pp.61-66
• /
• 2004

To develop natural food preservatives with Maesil (prunus mume), investigation of antimicrobial activities against food-related bacteria and yeast was conducted. Maesil (prunu mume) extract exhibited growth-inhibiting activities for most of the microorganisms tested. Minimum inhibitory concentrations (MIC) of maesil extract for Staphylococcus aureus and Bacillus subtilis were as low as 0.1mg/ml. The antimicrobial activity of the maesil (prunu mume) extract was reduced by heating or alkali treatment. Moreover, growth of Staphylococcus aureus was completely inhibited within 24 hours by the addition of at least 100 ppm of maesil extract. These findings suggest that maesil extract may play a role in the development of natural food preservatives.

• Resources Recycling
• /
• v.32 no.2
• /
• pp.3-11
• /
• 2023

The aim of this study was to develop a physical treatment method for obtaining iron concentrate with a grade higher than 60% from slag generated in the Waelz Kiln (WK) process. The size of the WK slag used in this work was several millimeters, with T-Fe and ZnO contents of 40.24% and 1.03%, respectively. The slag samples were pulverized in a laboratory rod mill for various grinding times, followed by a magnetic separation test under a low magnetic intensity of 0.05 T initially. The results showed that the highest iron grade was obtained from samples with a grinding time of 10 min. Additionally, for a grinding time of 20 min, the highest grade and recovery ratios were achieved at a magnetic intensity of 0.8 T. Based on these findings, the optimal physical treatment process proposed in this study resulted in iron concentrates with a grade of 61.34% and an enrichment ratio of 1.52.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.10
• /
• pp.1518-1524
• /
• 2016

This study was performed to minimize quality degradation of concentrated strawberry puree after $90^{\circ}C$ for 5 min by heat treatment with citric acid (CA) and acidic sodium metaphosphate (ASM) as pH modifiers. The highest color value was 1% CA+1% ASM (13.027), followed by 1% CA (9.539) and control (6.905). Anthocyanin contents were also 1% CA+1% ASM (3.049 mg/100 g), 1% CA (1.140 mg/100 g), and control (0.757 mg/100 g) in sequence. The DPPH radical scavenging activities of control, 1% CA, and 1% CA+1% ASM were 58.148, 72.638, and 83.736%, respectively. The color values, anthocyanin contents, and DPPH radical scavenging activities were significantly different at P<0.05 between control and 1% CA+1% ASM treatment. For the results of overall preference for hedonic test, there was no significant difference at P>0.05 among the three samples. During heat treatment, quality degradation of concentrated strawberry puree was reduced by 1% CA+1% ASM treatment, which is expected for new acidulants.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.3
• /
• pp.221-227
• /
• 2010

The solidification methods for powder wastes dried at CWDS(Concentrate Waste Drying System) in PWR have been studied in a variety of ways both at home and abroad. The solidification for these wastes has been performed using stabilization agents such as cement, paraffin and polymer. The applicability studies to maximize the reduction ratio of wastes and operational effectiveness for wastes treatment have been carried out, recently. It is necessary to pretreat the powder wastes before feeding wastes to vitrification facility because the fines flying brings about clogging of feeding pipes and off-gas treatment system or workers' exposure to radiation during maintenance. This paper describes an effective method for treatment of powder wastes to improve safety and stability of vitrification facilities.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.68-68
• /
• 1994

현재의 도금폐수처리는 침전옹집법에 의해 슬러지화 하여 매립되고 있으나, 이 매립물은 침출수를 방출하여 수질오염에 문제가 되고 있다. 특히 크롬폐수는 환원 침전시키고 있으나, 공기에 의한 산화로 재용출 가능성이 비교적 높다. 따라서 크롬 고금폐수를 역삼투압법에 의해 크롬이온을 농축 회수하고, 생성되는 투과수는 도금공정에 재투입하여 공해물질이 발생되지 않는 무배출 공정 (Zero-Discharge System)을 개발하는데 본 연구의 목적이 있다. 본 실험에서는 유가금속 중 크롬을 회수하기 위하여 크롬 모델폐수의 농도, pH등을 변화시키면서 연속공정으로 R.O. Cell에 의한 투과수와 막의 상태 변화등을 살펴보았으며, 크롬 실폐수를 R.O. Cell 테스트와 역삼투기기 (1-2ton/day)를 이용하여 농축수 및 투과수의 재이용에 관하여 실험하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.173-181
• /
• 2000

IAEA자료에 의하면 원자력 발전용 원자로는 1998년말 현재 세계 32개국에서 434기가 운전중이며, 총 출력은 3억 4889만kW인 것으로 나타났고, 이는 세계 총 발전량의 17%를 담당하는 것으로 확인되었다. 그러나 농축 우라늄 고체 핵연료를 사용하는 발전로 개념은 근본적으로 핵물질 SEU(Slightly Enriched Uranium)를 생산하기 위한 235U 농축과 노내에서 238U의 중성자 포획으로 전환.생성되는 Pu의 누적에 따른 핵확산 우려, 고준위 방사성 폐기물로 취급되는 사용후 핵연료 처리.처분에 관한 정책적.기술적 장기 전망의 불확실성, 그리고 설계기준사고인 LOCA로부터 중대사고로 이어지는 안전성 문제 등이 대두되고 있다. Th$^{233}$ /U용융염 핵연료주기를 이용하는 발전로 개념은 원자력 발전이 안고있는 고유문제들을 배제 또는 완화할 수 있는 방안으로 고려되고 있다.(중략)

• KSBB Journal
• /
• v.16 no.4
• /
• pp.403-408
• /
• 2001

Distillation condensate generated from downstream processing of microbial alcohol fermentation imposes a serious burden to biological wastewater treatment or anaerobic digestion due to its high contents of SS (suspended solids) and TN (total nitrogen), A pilot scale microfiltration of the stillage condensate with a stainless steel SCEPTER membrane of 0.1 ${\mu}$m pore size was carried out to remove SS which was mostly composed of microbial cell residue. A stable permeate flux was achieved when the decanter effluent containing 0.7% of SS was filtered under the conditions of X10 VCR (volume concentration ratio), 2.5 bar of TMP (transmembrane pressure), and 60$^{\circ}C$. When stillage condensate with 2.6% SS was treated directly with microfiltration, VCR below X3 was recommended for a long duration of filtration. The permeate and retentate obtained from microfiltration were recycled to make-up medium of fermentation. Adding permeate or retentate up to 30% of fermentation volume showed no distinguished undesirable influence during the course of alcohol fermentation. Although only slight improvements in the final amount of CO$_2$ evolution and alcohol content were observed, fermentation rate increased so that the required time to reach 450 L/ton of CO$_2$ evolution was shortened to 72% of that with normal media.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.220-225
• /
• 2003

Generally, liquid radioactive wastes generated in nuclear power plant exist in powder form which do not contain moisture through the evaporating process of the Liquid Waste Management System and drying process of the Concentrated Waste Drying System. This powder form wastes are blended homogeneously with paraffin solidification agent and packed in metal drum to ensure its stability during handling and disposal. However, it was experienced that the powder form wastes were not blended homogeneously and separated into two layers in metal drum, on the other hand, a Portion of powder was adhered and solidified to the Inside parts of facility during the blending process. And the flaw of blending process above would come in case the mole ratio of Boron to Sodium in liquid radioactive wastes exceeds 0.2.