• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.213-219
• /
• 1992

The microstructure, dopant distribution and electrical properties of the $As^{+}$ ion-implanted surface layer differ significantly depending on the methods of subsequent heat treatments, furnace annealing(FA) and rapid thermal annealing(RTA). The amorphous layer created by ion implantation was recrystallized during the thermal annealing through solid phase epitaxial (SPE) growth. The dopant distribution and electrical properties are discussed with respect to the TEM cross-sectional microstructure observed. The microstructure, dopant distribution and electrical properties depended upon especially the annealing time of the heat treatment.

• Nuclear Engineering and Technology
• /
• v.27 no.1
• /
• pp.141-153
• /
• 1995

SNU 1.5-MV 직렬형 반데그라프 가속기로부터 얻은 0.5~2.2 MeV He$^{++}$ 빔을 이용하여 러더포드 후방산란 분광법 (RBS, Rutherford Backscattering Spectrometry)으로 여러가지 시료의 표면적층을 분석하였다. 먼저 RBS 분석계통의 신뢰성을 확인하기 위하여 Micromatter사와 Charles Evans & Associates에서 제작한 14종 33개의 표준시료들에 대한 후방산란 실험을 수행하여, 각 층의 두께, 원소조성비 및 주입 이온의 깊이, 분포폭을 측정하였다. 결정된 이 값들은 제시된 값과 3% 이내로 일치하였다 이와 같이 본 RBS 분석계통의 신뢰성을 확인한 후, 분석을 의뢰받은 22종 87개의 시료에 대해, 빔에너지. 후방산란의 기하학적 구조 등의 최적 조건하에서 후방산란 실험을 수행하였다 그 결과, 분석가능한 두께의 한계를 벗어난 2종 3개의 시료를 제외한 나머지 모든 시료에 대해 각 층의 두께, 원소조성비 및 농도분포를 결정할 수 있었으며, 측정치의 통계오차는 8% 이내였다. 다양한 종류의 많은 시료들에 대한 표면적층 분석을 수행한 경험을 통하여, RBS 분석에서 신뢰도 높은 결과를 얻기 위해 분석계통에서 필수적으로 고려해야 할 요소들을 파악할 수 있었으며, 분석 결과에 대한 신뢰도는 분석 계통의 체계화뿐만 아니라 시료의 상태에 따라 크게 좌우됨을 알 수 있었다. 결론적으로 주의 깊은 시료준비와 RBS 분석계통의 최적화를 통해 신뢰도 높은 표면적층 분석이 가능함을 확인하였다.

• Journal of Wetlands Research
• /
• v.8 no.3
• /
• pp.79-89
• /
• 2006

The survival rate and tube number of Monocorophium uenoi, one of the dominant species in Lake Sihwa, was investigated under laboratory condition with salinity gradients (1, 5, 10, 15, 20, 25, 30, 35, 40‰). Another laboratory experiments were conducted to investigate the survival rate of Monocorophium uenoi in sulphide-rich sediment with oxic overlying water, and the effect of amphipod bioturbation on sulphide and oxygen profiles. The survival rate and tube-forming number of the amphipod were high in salinity range of 20 to 30‰. The amphipod survival rate was also high in sulphidic sediment when the water column was oxic. The amphipod bioturbation affected the oxygen and sulphide content in the sediment; oxygen conditions in the upper sediment layers were improved, and simultaneously the concentrations of sulphide were reduced. And their depth was clearly dependent on amphipod density. In Lake Sihwa, previously anoxic bottoms with sulphidic sediment during summer turn oxic with pycnocline disappearance during autumn. Amphipods seem to have the capability to quickly invade such areas, and their tubing of the sediment may play an important role in preparing the sediment for further recolonisation of other macrobenthos.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.234-241
• /
• 2022

We performed this study to determine the foliar nutrient concentration and the nutrient stocks of restoration areas and adjacent Pinus densiflora S. et. Z. (red pine) stands in opencast kaolinite mines in Sancheong-gun, Gyeongsangnam-do, southern Korea. We chose six sites to determine foliage nutrient concentrations and the nutrient stocks of soils (0-10 cm depth). The dominant vegetation planted in restoration areas comprised Quercus acutissima Carruth., P. koraiensis S. et. Z., Festuca arundinacea Schreb., and Lespedeza cuneata G. Don. Invading vegetation in the restoration areas comprised Alnus incana (L.) Medik., Robinia pseudoacacia L., and Lespedeza spp., among others. The carbon and nitrogen stocks at 10 cm soil depth were significantly higher in the red pine stands than those in the restoration areas, whereas those of phosphorus, potassium, and magnesium were not significantly different between the two areas. However, calcium stocks were significantly higher in the restoration areas than in the red pine stands. Nitrogen concentration in foliage was higher in L. cuneata (20.28 mg N g^-1) than that in F. arundinacea (5.67 mg N g^-1), whereas potassium concentration was twice as high in F. arundinacea (18.8 mg K g^-1) as that in L. cuneata (9.07 mg K g^-1). Foliar nitrogen concentrations in invasive vegetation such as A. incana, R. pseudoacacia, and Lespedeza spp. were twice or four times higher than those of Q. acutissima and P. koraiensis. Our results indicate the development of suitable vegetation and soil amendment treatments to improve poor soil environmental conditions in restoration areas are necessary following opencast kaolinite mining.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.139-139
• /
• 2000

종이는 제조 후 시간의 경과에 따라 노화가 야기되기 시작하며 이에 수반되는 현상으로서 종이의 기계적 강도 손실 및 종이의 색 변화를 들 수 있다. 종이의 노화 현상은 주로 빛, 열, 대기 오염물질, 미생물, 곤충 및 화학약품 등의 외부 인자들에 의해 종이 내에서의 가수 분해 또는 산화작용을 발생시키며 이는 종이의 폭넓은 이용올 제한하는 중요한 원인이 되고 있다. 종이의 노화기작은 주로 산 가수분해 및 산화작용 그리고 가교결합 둥으로 해석되고 있다. 이는 종이의 주 구성요소인 셀룰로오스의 수산기가 반웅하여 카르보닐기를 형성하면 서 저분자화 되거나 산소에 의해 산화되면서 저분자화 되어 종이의 강도적 손실이 일어난다 고 보고되고 있으며 종이의 황색화(Yellowing) 현상은 주원인이 종이에 잔존하고 있는 리그 년이 빛과 열에 의해 반응하여 산화됨으로써 야기된다고 설명되고 있다. 즉, 열이나 자외선 및 가시광션의 조사로 인한 셀룰로오스 및 기타 종이 구성물의 산화에 의해 종이가 퇴색되 거나 강도가 저하되는 현상이 일어나게 된다. 특히 이러한 노화 거동은 상온의 경우에서는 펄프와 종이의 황색화가 천천히 일어나지만 옹도가 점차 올라갈수록 그 속도는 빨라진다. 종이가 노화되면서 일어나는 산화반용은 주로 대기 중의 산소와 접촉하기 쉬운 표변에서부 터 발생하기 쉽다. 열처리를 통해 표면에서의 산화 작용은 촉진되고 종이의 구성원소의 결 합에 화학적 변화가 야기된다. 이를 분석하기 위해서 모든 원소가 독특한 결합에너지를 가 지고 있다는 것에 착안 시료 표면에 특정 x-선 및 전자빔을 입사하여 방출하는 광전자의 에너지를 측정함으로써 시료 표면의 조성 및 화학적인 결합상태를 알 수 있는 ESCA ( (Electron Spectroscopy for Chemical Analysis)를 이용하였다 .. ESCA는 주로 표면 원소의 규 명 및 정량분석과 화학결합 상태의 정성, 정량 분석, 깊이에 따른 원소의 농도 분포 분석, 고분자화합물의 특성 조사, 표면 원소의 화학결합에 따른 전자상태 연구 둥에 활용되 고 있 다. 즉, 종이가 노화되면서 원소들 사이에 변화되는 결합을 이러한 에너지 분석에 의해 원소 정성분석 또는 정량분석을 하고자 하였으며, 이를 분석하여 열처리 시 종이 표면에서 일어 나는 변화를 구명하고자 하였다. 이에 따라 본 연구에서는 종이의 노화를 가속화시키는 빛, 대기오염물질, 및 기타 다른 인 자들은 배제하고 열 만을 가해 노화의 진행속도를 높인 후, 노화 진행 시 종이 표변에 일어 나는 산화작용 및 가수분해를 표면 분석 장치인 ESCA를 이용하여 종이의 주 구성원소인 탄소와 산소가 열처리 시 변하는 에너지를 측정하였다. 또한 카르복실기 정량과 종이의 pH 측정 및 X -ray Diffractometer를 이용하여 결정화도를 측정하였다. 본 연구의 결과, 시간의 경과에 따라서 탄소의 결합에너지는 분포가 C-H에서 COO-, 또는 C=O로 달라짐으로써 종 이가 산화되고 있다는 것을 알 수 있었다. 또한 이 결합에너지 분포의 변화가 펄프의 종류 에 따라서 다르게 이동함으로써 제조된 시트의 표면 산화반응이 서로 다르게 일어나고 있음 을 알 수 있었으며, 이는 사용한 펄프의 화학 조성분의 차이에 기인한 것이라 사료된다.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.1
• /
• pp.27-32
• /
• 2010

This study was conducted to reclassify Anryong series based on the second edition of Soil Taxonomy and to discuss the formation of Anryong series distributed on the mountain foot slope. Morphological properties of typifying pedon of Anryong series were investigated and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon of Anryong series has brown (7.5YR 4/4) loam Ap horizon (0-22 cm), strong brown (7.5YR 4/6) cobbly clay loam BAt horizon (22-35 cm), strong brown (7.5YR 4/6) cobbly clay loam Bt1 horizon (35-55 cm), reddish brown (5YR 5/4) cobbly clay loam Bt2 horizon (55-82 cm), and brown (7.5YR 5/4) cobbly clay loam Bt3 horizon (82-120 cm). The typifying pedon has an argillic horizon from a depth of 22 to 120 cm and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. It can be classified as Ultisol, not as Alfisol. It has udic soil moisture regime, and can be classified as Udult. Also that meets the requirements of Typic Hapludults. It has 18-35% clay at the particle-size control section, and have mesic soil temperature regime. Therefore Anryong series can be classified as fine loamy, mesic family of Typic Hapludults, not as fine loamy, mesic family of Ultic Hapludalfs. Anryong series occur on mountain foot slope positions in colluvial materials derived from acid and intermediate crystalline rocks. They are developed as Ultisols with clay mineral weathering, translocation of clays to accumulate in an argillic horizon, and leaching of base-forming cations from the profile for relatively long periods under humid and temperate climates in Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.33-41
• /
• 2001

Enormous volumes of mining wastes from the abandoned and closed mines are disposed without a proper treatment in the upper Okdong River basin at Southeastern part of Kangwon Province. Erosion of these wastes contaminates soil, surface water, and sediments with heavy metals. Objectives of this research were to fractionate heavy metals in the mine tailing stored in the Sangdong Tungsten tailing dams and to assess the potential pollution index of each metal fraction. Tailing samples were collected from tailing dams at different depth and analyzed for physical and chemical properties. pH of tailings ranged from 7.3 to 7.9. Contents of total N and organic matter were in the ranges of 3.2~5.5%, and 1.3~9.1%, respectively. Heavy metals in the tailings were higher in the newly constructed tailing dam than those in the old dam. Total concentrations of metals in the tailings were in the orders of Zn > Cu > Pb > Ni > Cd, exceeded the corrective action level of the Soil Environment Conservation Law and higher than the natural abundance levels reported from uncontaminated soils. Relative distribution of heavy metal fractions was residual > organic > reducible > carbonate > adsorbed, reversing the degree of metal bioavailability. Mobile fractions of metals were relatively small compared to the total concentrations. Distribution of metals in the tailing dam profiles was metal specific. Concentrations of Cu at the surface of tailing dams were higher than those at the bottom. Pollution index (PI) values of each fraction of metals were ranged from 4.27 to 8.51 based on total concentrations. PI values of mobile fractions were lower than those of immobile fractions. Results on metal fractions and PI values of the tailing samples indicate that tailing samples were contaminated with heavy metals and had potential to cause a detrimental effects on soil and water environment in the lower part of the stream. A prompt countermeasure to prevent surface of tailings in the dams from water and wind erosions is urgently needed.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.1
• /
• pp.91-104
• /
• 1996

The viability loss or death of weed seeds buried in soil can be induced by infrared irradiation which has good penetration in moist soil. By using this principle of pre-emergence soil-treatment, the study was carried out to obtain basic information needed to develop the effective weed control method for the production of less polluted agricultural products. An apparatus for irradiating infrared was constructed by using ceramic material with high emissivity. The LPG was used as fuel for producing infrared by heating ceramic material. The soil heated in this study was loam with four levels of moisture contents (0.6, 5.7, 10.7, 15.1 % wb). The temperature distribution was measured at various soil depths when soil with different moisture content was irradiated with infrared for three different times (30, 60, 90 sec). The soil depths with duration time of minimum 3 minutes over $80^{\circ}C$, temperature inducing viability loss of weed seeds, were investigated. When the moisture content of soil was 0.6 and 5.7 % wb, the soil depths which can induce viability loss of weed seeds was greatly increased with increasing irradiation time. However, any depths of soil tested in this study was not reached to the temperature of $80^{\circ}C$ when 30 seconds of irradiation time was applied on soil with moisture content of 10.7 or 15.1 % wb. Generally, the soil depth needed for viability loss of weed seeds was decreased with increasing moisture content of soil. Also, longer irradiation time was required to induce viability loss of weed seeds with increasing moisture content of soil.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.1-11
• /
• 2002

In this paper, new simple method for the calculation of depletion region under complex geometry and general purpose numerical simulator that could handle this were developed and applied in the analysis of SCM with nanoscale tip, which is a promising tool for high resolution dopant profiling. Our simple depletion region seeking algorithm alternatively switches material of elements to align ionized element boundary with contour of zero potential. To prove the validity of our method we examined whether our results satisfy the definition of depletion region and compared those with known values of un junction and MOS structure. By modeling of capacitance based on the shape of depletion region and potential distribution, we could calculate the CV curve and dC/dV curve between silicon substrate and nanoscale SCM tip.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.164-175
• /
• 2009

CFD is used to analyze gas flow characteristics, power absorption, electron temperature, electron density and chemical species profile of an internal antenna type inductively coupled plasma system. An optimized grid generation technology is used for a complex real-scale models for industry. A bare metal antenna shows concentrated power absorption around rf a feeding line. Skin depth of power absorption for a system is modeled to 50 mm, which is reported 53 mm by experiments. For an application of bipolar plates for hydrogen fuel cells, multi-sheet loading ICP nitriding system is proposed using an internal ICP antenna. It shows higher atomic nitrogen density than reported simple pulsed dc nitriding systems. Minimum gap between sheets for uniform nitriding is modeled to be 39 mm.