• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5C
• /
• pp.486-492
• /
• 2003

The vigilance threshold of conventional fuzzy ART algorithm decide whether to permit the mismatch between any input pattern and stored pattern. If the vigilance threshold was large, despite of little difference among input and stored patterns, the input pattern may be classified to new category. On the other hand, if the vigilance threshold was small, the similarity between two patterns may be accepted in spite of lots of difference and the input pattern are classified to category of the stored pattern. Therefore, the vigilance threshold for the image recognition must be experientially set for the good result. Moreover, it may occur in the fuzzy ART algorithm that the information of stored patterns is lost in the weight-adjusting process and the rate of pattern recognition is dropped. In this paper, I proposed the enhanced fuzzy ART algorithm that supports the dynamical setting of the vigilance threshold using the generalized intersection operator of fuzzy logic and the weight value being adaptively set in proportional to the current weight change and the previous weight by reflecting the frequency of the selection of winner node. For the performance evaluation of the proposed method, we applied to the recognition of container identifiers from shipping container images. The experiment showed that the proposed method produced fewer clusters than conventional ART2 and fuzzy ART algorithm. and had tile higher recognition rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.200-207
• /
• 2007

Many P2P systems which are designed to implement large-scale data sharing have been introduced in internet recently. They exhibit interesting features like sell-configuration, sell-healing and complete decentralization, which make them appealing for deployment in ad hoc environments as well. This paper proposes an Gnutella-based P2P system that can operate efficiently in ad hoc networks. The objectives of this paper are to extend the overall system lifetime, to reduce overheads, and to provide enhanced performance. The proposed system uses an ultrapeer election scheme based on metric values and proactive distribution of ultrapeer information. According to the simulation results, the proposed system can provide better performance than Gnutella in terms of query success rate, query response time, overhead and residual battery power by utilizing network resources efficiently.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.443-448
• /
• 2013

Ant Colony System(ACS) is a meta heuristic approach based on biology in order to solve combinatorial optimization problem. It is based on the tracing action of real ants which accumulate pheromone on the passed path and uses as communication medium. In order to search the optimal path, ACS requires to explore various edges. In existing ACS, the local updating rule assigns the same pheromone to visited edge. In this paper, our local updating rule gives the pheromone according to the total frequency of visits of the currently selected node in the previous iteration. I used the ACS algoritm using subpath for search. Our approach can have less local optima than existing ACS and find better solution by taking advantage of more informations during searching.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.185-192
• /
• 2013

The purpose of this study is to set the relationship between each parts that forms the engine of an automobile based on the 3D visualization technology which is able to be learned according to the skill of the operator in the industry field and to recommend the auto parts using a task ontology. A visualization method was proposed by structuring the complex knowledge by signifying the link and the node in forms of a network and using SOM which can be shown in the form of 3 dimension. In addition, by using is-a Relationship-based hierarchical Taxonomy setting the relationship between each of the parts that forms the engine of an automobile, to allow a recommendation using a weighted value possible. By providing and placing the complex knowledge in the 3D space to the user for an opportunity of more realistic and intuitive navigation, when randomly selecting the automobile parts, it allows the recommendation of the parts having a close relationship with the corresponding parts for easy assembly and to know the importance of usage for the automobile parts without any special expertise.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.547-559
• /
• 2003

In this study, a mathematical model is developed for sewer rehabilitation planning by considering cost and inflow/infiltration. A sewer rehabilitation planning model is required to decide the economic life of the sewer by considering trade-off between cost and inflow/infiltration. And it is required to find the optimal rehabilitation timing, according to the cost effectiveness of each sewer rehabilitation within the budget. To solve the problem, we formulated a multiple objective mixed integer programming(MOMIP) model based on network flow optimization. The network is composed of state nodes and arcs. The state nodes represent the remaining life and the arcs represent the change of the state. The model considers multiple objectives which are cost minimization and minimization of inflow/infiltration. Using the multiple objective optimization, the trade-off between the cost and inflow/infiltration is presented to the planner so that a proper sewer rehabilitation plan can be selected.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10B
• /
• pp.947-956
• /
• 2003

The current IP Routing Protocolspacket networks also need to provide the network QoS based of DiffServ, RSVP, MPLStraffic model which is standardized as IETF reference model for NGN. The first topic of this paper is to propose Traffic-Balanced Routing Protocol(TBRP) to process existing best effort traffic. TBRP will process low priority interactive data and background data which is not sensitive to dealy. Secondly Hierarchical Traffic-Traffic-Scheduling Routing Protocol(HTSRP) is also proposed. HTSRP is the hierarchical routing algorithm for backbone and access networkin case of fixed-wireless convergence network. Finally, HTSRP_Q is proposed to meet the QoS requirement when user want interactive or streaming packet service. This protocol will maximize the usage of resources of access layer based on the QoS parameters and process delay-sensitive traffic. Service classes are categorized into 5 types by the user request, such as conversational, streaming, high priority interactive, low priority interactive, and background class. It could be processed efficiently by the routing protocolstraffic model proposed in this paper. The proposed routing protocolstraffic model provides the increase of efficiency and stability of the next generation network thanks to the routing according to the characteristic of the specialized service categories.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.556-560
• /
• 2010

In the wireless sensor networks using a multi-hop, quality variation of links occurs irregularly due to the hardware restriction and environmental factor. If an appropriate route, which is affected by the quality variation, is not selected. Traditionally, a beacon is periodically broadcasted and the link quality is estimated. However, the periodically beacon based scheme cannot efficiently estimate the quality of the link changing irregularly. In this paper, a scheme to estimate the link quality adaptively according to network state is proposed. When the link quality changes, the scheme adapts to a change agilely and packet losses are reduced. When there is no change of the link quality, the link quality is estimated in the long period and the energy consumption is reduced. Through performance evaluations, we prove that our adaptive link estimation scheme improves the energy efficiency and packet reception ratio than the periodic estimation scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.723-729
• /
• 2001

We are able to work on the shared virtual space in Web-based Collaborative Design System using only Internet and Web browser. The users connect to the Solid Modeler Server through m and they create 3D shape and manipulate them variously. Then the users will share 3D objects and two problems can arise. The users must be able to pick the objects effectively which they want to manipulate. When one of the users manipulates a particular object, others should not disturb with the same object. In this paper, picking is implemented not only by computing intersection of mouse pointer with the objects of the virtual world, but also by using capabilities and attributes of scene graph node, by setting bounds intersection testing instead of geometric intersection testing, by limiting the scope of the pick testing, using Java 3D. These methods can reduce the computation of picking and can pick 3D objects effectively and easily using the system of hierarchy. To have effective concurrency, we used shared lock and exclusive lock as the action in work space.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.301-307
• /
• 2015

In this paper, we consider wiretap channels in the presence of an eavesdropper assuming spatially correlated MIMO(multiple-input multiple-output) channels, where we analyze a physical layer security performance of orthogonal space-time block code(OSTBC) using one-bit feedback assuming cross polarized antennas at each node. In this paper, we present a method to select a transmit-antenna group for OSTBC using one-bit feedback(O-OSTBC) and compare secrecy outage probabilities of various transmit-antenna grouping methods. Especially, we propose an efficient transmit-antenna grouping method by comparing secrecy outage probabilities of O-OSTBC and conventional OSTBC in highly correlated MIMO channels.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.572-580
• /
• 1996

This paper describes a test generation method for sequential circuits which improves the application limits of the IPMT method by applying the partial scan design to the IPMT method. To solve the problem that the IPMT method requires enormous computation time in image computation, and generates test patterns after the partialscan design is introduced to reduce test complexity. Scan flip-flops are selected for the partial scan design according to the node size of the state functions of a sequential circuit in their binary decision diagram representations. Experimental results on ISCAS'95 benchmark circuits show that a test generator based on our method has achieved 100% fault coverage by use of either 20% scan FFs for s344, s349, and s420 or 80% scan FFs for sl423. However, test gener-ators based on the previous IPM method have not achieved 100% fault coverage for those circuits.