• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.5
• /
• pp.1-9
• /
• 2024

With the emergence of various next-generation wireless networks, the traditional store and forward(SF) method at network nodes has faced limitations in efficiently utilizing network capacity. To overcome these limitations, various network coding techniques based on the decode and forward(DF) method have been proposed. However, these techniques have primarily focused on traffic environments with asymmetric packet lengths between relay nodes, limiting their applicability when different modulation and coding schemes(MCS) are applied to relay nodes. This paper proposes a relay network coding scheme that supports high frequency efficiency while simultaneously enabling bidirectional relaying using DF, considering asymmetric MCS traffic that reflects different transmission data and wireless channel conditions between individual nodes for efficient utilization of wireless network capacity. Additionally, this paper demonstrates the possibility of cooperative communication at the relay and examines the effect of increased communication distance. Subsequently, computer simulations are conducted to verify the performance gains of the proposed technique in terms of network coding for each source node with asymmetric information lengths. This proposed technique shows additional bit error rate(BER) performance gains by adopting an incremental redundancy(IR) scheme that follows network coding, even in mobile node environments where direct link transmission between source nodes is possible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1147-1158
• /
• 2006

Clustering algorithm is an essential element to implement a hierarchical routing protocol, especially for a large-scale wireless sensor network. In this paper, we propose a new type of energy-efficient clustering algorithm, which maximizes the physical distance between cluster head and gateway by a neighbor node discovery mechanism. Furthermore, a slave/master patching scheme is introduced as a useful means of further improving the energy-efficiency. It has been shown that the number of cluster heads can be reduced by as many as 21% as compared with the existing clustering algorithms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.453-458
• /
• 2013

Aside from the issues like energy saving and maximizing network lifetime. WMSN has another issue to deal with: support of quality of service(QoS) which is required especially for handling real-time data such as object tracking and data gathering. This paper proposes a multipath routing algorithm considering the distance to sink node, energy level and link quality of neighbour nodes. Proposed algorithm supports multipath routing path with high quality links. Hence it helps to reduce a power consumption concentration that happens in particular set of nodes along the frequently selected route. It also specifies a service quality pattern and a service quality level depending on traffic pattern. By doing this, the proposed algorithm can realize a differentiated service with QoS guaranteed data transmission.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.53-60
• /
• 2010

This paper proposes an efficient path maintaining scheme in the grid based wireless sensor networks. The proposed scheme provides the shortest path from a source node to a mobile sink node in a re-established dissemination path. The shortest path can save energy consumption to deliver data to the destination. The proposed scheme can also reduce the cost for path maintenance by reusing the existing path. The simulation results show that the proposed scheme reduces the path maintenance cost by 60% compared to the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.630-635
• /
• 2008

Recently, in order to improve the energy efficiency of WSN(Wireless Sensor Network), widely research have teen carried on. But, up to the present, Majority of methods are based on direct communication between CH(cluster head) and sink node, and based on the assumption that node can regulate signal energy actively according to the distance between nodes. So it's hard to implement those methods. Based on the theory that node has fixed radio wave radius, this paper present a multi leveling routing protocol. According to the simulation of the presented protocol, we have proved the energy saving efficiency and the implementation in real WSN.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.923-930
• /
• 2004

Wireless sensor networks is a core technology of ubiquitous computing which enables the network to aware the different kind of context by integrating exiting wired/wireless infranet with various sensor devices and connecting collected environmental data with applications. However it needs an energy-efficient approach in network layer to maintain the dynamic ad hoc network and to maximize the network lifetime by using energy constrained node. Cluster-based data aggregation and routing are energy-efficient solution judging from architecture of sensor networks and characteristics of data. In this paper. we propose a new distributed clustering algorithm in using distance from the sink. This algorithm shows that it can balance energy dissipation among nodes while minimizing the overhead. We verify that our clustering is more en-ergy-efficient and thus prolongs the network lifetime in comparing our proposed clustering to existing probabilistic clustering for sensor network via simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.188-195
• /
• 2012

Many systems are developing for the realization of NCW(Network Centric Warfare). UAV(Unmanned Aerial Vehicle) Network is attracting attention in a lot of military applications. In general, UAVs have the potential to create an ad-hoc network and greatly reduce the hops from source to destination. However, UAV networks exhibit unique properties such as high mobility, high data rate, and real time service. The routing protocols are required to design the multi-hop routing protocols that can dynamically adapt to the requirements of UAV network. In this paper we analyse Geographic Routing Protocol is based on geographical distance between source and destination for efficient and reliable transmission. Geographic Routing Protocol is evaluated in video service scenarios with TDMA model in our simulation. The simulation results show that the performance of Geographic Routing Protocol is better than the MANET Routing Protocol in terms of packet received ratio, end to end delay, and routing traffic sent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1104-1111
• /
• 2012

Airborne tactical networks is used to air-to-air or air-to-ground operation and have a large propagation delay. All nodes share the data by using TDMA-based broadcasting. In airborne tactical networks, each time slot needs the guard time to ensure the broadcasting because the collisions occur due to the large propagation delay. However, the channel utilization of the networks can be greatly degraded due to the waste of guard time. In this paper, we propose Inter-Transmitter Distance-Based TDMA (ID-TDMA) scheme which ensures the broadcasting while improving the channel utilization by reducing the guard time with the inter-transmitter distance information. The proposed scheme shows the effectiveness through the performance evaluation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.493-502
• /
• 2003

In this paper, to solve some problems of the Mobile IP and local registration strategy we propose a method that can effectively support real-time traffics sensitive to delay time and packet loss. The proposed method reduces the registration time after a Mobile Node's movement between networks by carrying out the pre-registration for the domain which it will move into the network information of the link layer of cdma2000 system, at the boundary cell's handoff zone. Through the cost analysis and simulation it is shown that the proposed scheme yield a better performance compared with the Mobile IP and local registration strategies in terms of packet loss for parameters; variation of the velocity of a Mobile Node, and a distance between the Mobile Node and home networks, etc.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.56-63
• /
• 2009

The IEEE 802.11 standard has been used for wireless data networks such as wireless LAN, ad-hoc network, and vehicular ad-hoc network. Thus, the performance analysis of the IEEE 802.11 specification has been one of the hottest issues for network optimization and resource management. Most of the analysis studies were performed in a data plane of the IEEE 802.11 unicast. However, IEEE 802.11 broadcast is widely used for topology management, path management, and data dissemination. Thus, it is important to understand the performance of the broadcast scheme for the design of efficient wireless data network. In this contort, we analyze the IEEE 802.11 broadcast scheme in terms of the broadcast frame reception probability according to the distance from a sending node. Unlike the other works, our analysis framework includes not only the system parameters of the IEEE 802.11 specification such as transmission range, data rate, minimum contention window but also the networking environments such as the number of nodes, network load, and the radio propagation environments. Therefore, our analysis framework is expected to be used for the development of protocols and algorithms in a dynamic wireless data network.