• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제11권2호
• /
• pp.137-145
• /
• 1986

The contention resolution algorithm with the limited packet delay time as well stable distribution as the packet delay time is proposed and implementes for improving the mean packet delay time in the network employing CSMA/CD as the access method. The implementation of node controller is based on IEEE 802.2 standard logical link control(LLC) and IEEE 802.3 standard medium access control(MAC). Some portion of IEEE 802.3 Standard MAC, and the Binary Exponential Back-off(BEB) algorithm is replaced by the proposed algorithm. From the view of normalized mean packet transmission delay time, the controller implemented here can be applicable to the office-automation system, and the factory-and laboratory-automation environment where the limited time criterion is very significant.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제13권2호
• /
• pp.277-284
• /
• 2009

With significant development in wireless communication technologies, the needs to handover from one network to another have grown dramatically. Recently IETF developed MIPv6 and FMIPv6 which are used to handover between different access networks. These handover mechanisms have some known weaknesses. MIPv6 can not serve time-critical application because it causes long handover latency and packet loss. By these reasons, MIPv6 does not guarantee session continuity. FMIPv6 uses handover preparation phase to reduce DAD latency. However FMIPv66 still suffers from long handover latency, because it must perform binding update at the end of handover procedure. In this paper we propose new handover mechanism FMIPv6-PBU which eliminates binding update latency. The proposed mechanism has compatability with lagacy FMIPv6. In this paper propose FMIPv6-PBU handover procedure and explain its procedures and evaluate it with MIPv6 and FMIPv6.

• KIISE Transactions on Computing Practices
• /
• 제24권2호
• /
• pp.77-81
• /
• 2018

Many studies that improve the efficiency of data collection and a network's lifetime by using a mobile sink have been conducted using wireless sensor networks. If a drone is used as a mobile sink, the drone can collect data more efficiently than can existing mobile sinks operating on the ground because the drone can minimize the effects of obstacles and the terrain. In this paper, we propose a rendezvous node selection scheme which considers estimated drone's trajectory and data collection latency of sensor networks for reliable data collection, when a drone whose trajectory is not predetermined works with terrestrial wireless sensor networks. A selected rendezvous node on the ground collects data from the entire network and it sends then collected data to the drone via direct communication. We also verify that the proposed scheme is more reliable than previous schemes without considering the drone's trajectory and data collection latency.

• Journal of KIISE:Information Networking
• /
• 제36권1호
• /
• pp.1-11
• /
• 2009

In this paper, we propose a QoS routing protocol for WiMAX based wireless mesh networks. The proposed routing protocol is a proactive hop-by-hop QoS routing protocol. It can find an optimal route that satisfies QoS requirements using bandwidth and delay as QoS parameters. In this paper, we first present a network model for WIMAX based wireless mesh networks and explain why QoS routing protocol is the most appropriate for WiMAX based wireless mesh networks. Then, we propose a proactive hop-by-hop QoS routing protocol that meets QoS requirements of traffic flowing between mesh client and the gateway. The simulation results show that the proposed routing protocol outperforms QOLSR protocol in terms of end-to-end delay, packet delivery ratio and routing overhead.

• The KIPS Transactions:PartC
• /
• 제15C권6호
• /
• pp.531-538
• /
• 2008

With the dynamic and mobile nature of ad hoc networks, links may fail due to topology changes. So, a major challenge in ad hoc network is dynamically to search paths from a source to destination with an efficient routing method, which is an important issue for delay-sensitive real-time application. The main concerns of graph theory in communications are finding connectivity and searching paths using given nodes. A topology of the nodes in ad hoc networks can be modeled as an adjacency matrix. In this paper, based on this adjacency matrix, we propose new path search algorithms using a sequence of matrix calculation. The proposed algorithms can search paths from a destination to a source using connectivity matrix. Two matrix-based algorithms for two different purposes are proposed. Matrix-Based Backward Path Search(MBBS) algorithm is designed for shortest path discovery and Matrix-Based Backward Multipath Search(MBBMS) algorithm is for multipath search.

• The KIPS Transactions:PartC
• /
• 제15C권6호
• /
• pp.513-522
• /
• 2008

Efficient data dissemination is one of the important subjects for sensor networks. High accessibility of the sensed data can be kept by deploying the data centric storage approach in which data is stored over the nodes in the sensor network itself rather than external storages or systems. The advantage of this approach is its direct accessibility in a real-time without the severe burden on delay and power dissipation on the data path to the external storages or systems. However, if the queries from many users are concentrated to the few nodes with data, then the response time could be increased and it could lead to the reduction of network life time by rapid energy dissipation caused by concentrated network load. In this paper, we propose a adaptive data centric storage scheme based on proxy trajectory (APT) mechanism. We highlight the data centric storage mechanism by taking account of supporting large number of users, and make it feasible to provide high-performance accessibility when a non-uniform traffic pattern is offered. Storing data around the localized users by considering spatial data-access locality, the proxy trajectory of APT provides fast response for the users. The trajectory, furthermore, may help the mobile users to roams freely within the area they dwell.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제9권6호
• /
• pp.617-623
• /
• 2016

Recently, IoT technology has been applied to the control of appliances in the home, and information about temperature, humidity, etc. is collected and the application of the system to control the indoor environment automatically is increasing. Currently, the network configuration of IoT devices is mainly used to connect IoT devices to the Internet through wireless gateways. Since such a method is dependent on a gateway, there are limitations in providing various services. Therefore, this paper proposes an independent method of gateway by using IoT network without using gateway by applying long distance wireless communication technology. IoT devices using the proposed long distance wireless internet technology can connect to a remote server and provide mobility that can not be supported by existing methods, thereby providing more various services. The performance evaluation of the proposed network configuration method is compared with the delay time and the amount of data generated in the existing network method constituted by the gateway and the proposed network configuration method respectively. Experimental results show that the proposed method decreases the delay time and the amount of data generated by the gateway.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제21권4호
• /
• pp.724-730
• /
• 2017

SpaceWire invented for spacecrafts has Time-Code defined for time synchronization over SpaceWire network. A Time-Code suffers transmission delay of 14[bit-period] and jitter up to 10[bit-period] whenever it passes through a SpaceWire link, which is the primary cause of time synchronization error. This work presents a simple method to improve the time synchronization which uses two extended Time-Codes. Nodes on a SpaceWire network can find how much delay and jitter a received Time-Code has suffered while it passes through the network, and they can correct time synchronization error with this information. The proposed method was validated in a simulation environment developed based on OMNeT++. The simulation result showed that time synchronization error less than a few bit-periods can be achieved. The proposed method is cost effective and suitable for small-scale SpaceWire network systems.

• Journal of KIISE:Information Networking
• /
• 제36권3호
• /
• pp.251-255
• /
• 2009

Network coding is a promising technology that increases the system throughput via reducing the number of transmission for a packet delivered from the source node to the destination node. Nevertheless, it suffers from the metrics of end-to-end delay. Network Coding scheme takes more processing delay which occurs as coding node encodes (XOR) a certain number of packets that relayed by the coding node, and more queuing delay which occurs as a packet waits for other packets to be encoded with. Therefore, in this paper, we analyze the dependency of the queuing delay to the arrival rate of each packet. In addition, we analyze and compare the delay in DCF without XOR and DCF with XOR under dynamic traffic.

• The KIPS Transactions:PartC
• /
• 제11C권7호
• /
• pp.905-916
• /
• 2004

Self-organizing hierarchical ad hoc network (SOHAN) is a new ad-hoc network architecture designed to improve the scalability properties of conventional 'flat' ad hoc networks. This network architecture consists of three tiers of ad-hoc nodes, i.e.. access points, forwarding nodes and mobile nodes. This paper presents a topology discovery and routing protocol for the self-organization of SOHAN. We propose a cross-layer path metric based on link quality and MAC delay which plays a key role in producing an optimal cluster-based hierarchical topology with high throughput capacity. The topology discovery protocol provides the basis for routing which takes place in layer 2.5 using MAC addresses. The routing protocol is based on AODV with appropriate modifications to take advantage of the hierarchical topology and interact with the discovery protocol. Simulation results are presented which show the improved performance as well as scalability properties of SOHAN in terms of through-put capacity, end-to-end delay, packet delivery ratio and control overhead.