• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.1
• /
• pp.73-82
• /
• 2014

This study was conducted to investigate the ear and kernel characteristics of waxy corn during ripening by double cropping, and to understand the pattern of starch accumulation in endosperm of waxy corn kernels. Chalok4 and Ilmichal were sown at April 20 (first cropping) and July 20 (second cropping) in 2011~2012. The accumulated temperature from silking to harvesting was about $590{\sim}630^{\circ}C$. It takes 23~24 days when Chalok4 and Ilmichal were sown in April 20, but July 20 sowing takes 32~35 days. Ear length and kernel set length were significantly shorter in second cropping (p<0.05). Kernel length, kernel width, 100-kernel weight, and starch content of waxy corn were increased as ears matured (p<0.05). Growth temperature was getting decreased during the ripening stage of second cropping, the rate of ear and kernel development had slowed. Starch granules started to accumulate in the cells around the pericarp, then developed in the cells around the embryo. In the second cropping, starch granules in the kernel of waxy corn were less compact than the first cropping, harvesting time of waxy corns can be extended. These results will be helpful to farmers for double cropping of waxy corn cultivation and management.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.63-68
• /
• 2013

Manual wheelchair is one of the most used assistant device in Korea and the size of the wheelchair is defined as KS P ISO 7176-5 which follows the ISO 7176-5 standard size. But the standard often doesn't fit to Korean people because the ISO was enacted by foreigners' body sizes. Actually the result of survey from the Korean Agency for Technology and Standards showd that the designated sizes of height, width, deep of seat except armrest and the height of backrest of a chair in the present KS P ISO 7176-5 are much bigger and the height of armrest is smaller than the sizes investigated by the survey. In case the disabled person has a long wheelchair use time everyday, the posture of user should be uncomfortable because the mismatched size should cause user's pelvis rotations, slouching pose and low stability. Also, inside of knee may touch the wheelchair seat and user can't keep a correct posture. In this paper, the body sizes of Korean disabled person were investigated and the correct wheelchair sizes for Korean people are provided.

• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.381-388
• /
• 2013

This study presents that effect of anchor plate on concrete breakout strength was evaluated. The addition of the anchor plate is to improve the concrete breakout capacity for a single anchor system in a thin-walled concrete panel (Insulated concrete sandwich wall panel). In this study, an elasticity-based simplified model was developed and used to predict effect on the anchor plate. Flexural stresses of the plate with respect to the concrete breakout strength obtained from CCD (Capacity Concrete Design) approach were compared with the test results. Through the test results, while the concrete breakout strength was improved due to increment of the width and thickness of the anchor plate, improvement of the strength was steadily declined. In addition, the It was observed that the analytical and experimental flexure of the anchor plate was comparatively in good agreement using the simplified elastic analysis model.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.2
• /
• pp.23-32
• /
• 2004

The query optimizer's important task while a query is invoked is to estimate the fraction of records in the databases that satisfy the given query condition. The query result size estimation in spatial databases, like relational databases, proceeds to partition the whole input into a small number of subsets called “buckets” and then estimate the fraction of the input in the buckets. The accuracy of estimation is determined by the difference between the real data counts and approximations in the buckets, and is dependent on how to partition the buckets. Existing techniques for spatial databases are equi-area and equi-count techniques, which are respectively analogous in relation databases to equi-height histogram that divides the input value range into buckets of equal size and equi-depth histogram that is equal to the number of records within each bucket. In this paper we propose a new partitioning technique that determines buckets according to the maximal difference of area which is defined as the product of data ranges End frequencies of input. In this new technique we consider both data values and frequencies of input data simultaneously, and thus achieve substantial improvements in accuracy over existing approaches. We present a detailed experimental study of the accuracy of query result size estimation comparing the proposed technique and the existing techniques using synthetic as well as real-life datasets. Experiments confirm that our proposed techniques offer better accuracy in query result size estimation than the existing techniques for space query size, bucket number, data number and data size.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.612-620
• /
• 2016

Aqueous mineral carbonation process, in which $CO_2$ is captured through the reaction with aqueous calcium oxide (CaO) solution, is one of CCU technology enabling the stable sequestration of $CO_2$ as well as economic value creation from its products. In order to enhance the carbon capture efficiency, it is required to maximize the dissolution rate of solid reactants, CaO. For this purpose, the proper design of a reactor, which can achieve the uniform distribution of solid reactants throughout the whole reactor, is essential. In this paper, the effect of internal reactor designs on the solid dispersion quality is studied by using CFD (computational fluid dynamics) techniques for the pilot-scale reactor which can handle 40 ton of $CO_2$ per day. Various combination cases consisting of different internal design variables, such as types, numbers, diameters, clearances and speed of impellers and length and width of baffles are analyzed for the stirred tank reactor with a fixed tank geometry. By conducting sensitivity analysis, we could distinguish critical variables and their impacts on solid distribution. At the same time, the reactor design which can produce solid distribution profile with a standard deviation value of 0.001 is proposed.

• Korean Journal of Ecology and Environment
• /
• v.50 no.2
• /
• pp.207-215
• /
• 2017

Body scales directly exposed to external environments can be an important factor to understand various characteristics of a species such as habitat features, life history and basic ecology. In this study, we compared size and morphology of dorsal, outermost dorsal, keeled dorsal and ventral scales of total nine snake species in Korea; Oocatochus rufodorsatus, Elaphe dione, Rhabdophis tigrinus, Amphiesma vibakari, Dinodon rufozonatum, Hierophis spinalis in the Colubridae and Gloydius ussuriensis, G. brevicaudus, G. saxatilis in the Viperidae. The morphological characteristics of the scales seem to well reflect foraging modes and moving activity of both families. Uniquely D. rufozonatum had a diamond shape dorsal scale and had the greatest and smallest value of the ratio of width/length of dorsal and ventral scales, respectively. O. rufodorsatus, D. rufozonatum and H. spinalis did not have keeled dorsal scales and E. dione had keel on the few of dorsal scales. In addition, morphological characteristics of scales of three viper species were closely consistent with previously known phylogenetic relationships.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.480-485
• /
• 2017

The main reason for the heat induced accidents occurring at the after stern tube journal bearing is the excessive local pressure caused by the deflection of the propulsion shaft due to the propeller loads. It is expected that the contact area could beenlarged and the local pressure reduced accordingly by using a lining material having alow Young's modulus instead of the existing white metal. The purpose of this work is to investigate the characteristics of the pressure distribution and determine the allowable pressure value in the case where bearing products made of materials having a low Young's modulus are used. In this study, the propeller loads, heat effect, and hull deflection are considered in the evaluation of the local pressure of the ship propulsion shaft. Also, the Hertzian contact condition was applied. From the analysis results in the case where a lining material with a low Young's modulus was used, it was found that a robust design could be achieved and the local pressure could be reduced effectively independent of the load conditions. It will be possible to producenew products made of materials having a low Young's modulus if the manufacturer confirms the performance specifications drawn by this study.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.374-380
• /
• 2017

Image analysis and k-mean clustering were conducted to develop a grading system of dried sea cucumber (SC) based on rehydration rate. The SC images were obtained by taking pictures in a box under controlled light conditions. The region of interest was extracted to depict the shape of the SC in a 2D graph, and those 2D shapes were rendered to build a 3D model. The results from the image analysis provided the morphological features of the SC, including length, width, surface area, and volume, to obtain the parameters of the k-mean clustering weight. The k-mean clustering classified the SC samples into three different grades. Each SC sample was rehydrated at $30^{\circ}C$ for 40 h. During rehydration, the flux of each grade was analyzed. Our study demonstrates that the mass transfer rate of SC increased as the surface area increased, and the grade of SC was classified based on rehydration rate. This study suggests that the optimal rehydration process for SC can be achieved by applying a suitable grading system.

• Korean Journal of Environment and Ecology
• /
• v.30 no.6
• /
• pp.970-976
• /
• 2016

Determining age structure of the population of an endangered species is critical because it could provide basic information about population dynamics. In this study, we assessed the possibility if the growth lines on dorsal scutes of the national monument as well as endangered Reeves' turtle (Mauremys reevesii) can reliably estimate actual ages of the 100 turtles of which actual ages were known and have been housed in Seoul Zoo. We counted the number of growth lines on the first four dorsal scutes and the first left and right lateral scutes of each turtle and compared those with their known actual ages. Ages estimated by the growth lines were overestimated at between 1 and 5 actual ages, but underestimated at between 6 and 9 actual ages, indicating that age estimation using growth lines is only partially applicable at actual ages of less than 6 years old. In addition, using length and width of turtle's dorsal plates, we produced growth curves with equations to estimate actual ages of females combined with juveniles, but its application to estimate actual ages was not reliably possible because all subject turtles which used were at relatively young ages. In conclusion, when estimating actual ages of Reeves' turtles using the number of growth lines on the dorsal scutes, it is recommend to use minimum values at less than 6 lines, but use maximum values at more than 7 lines. As the first study which estimated actual ages of a turtle species using growth lines on the dorsal scutes in Korea, our results could be useful to estimate ages of the endangered Reeve's turtles in the field although its application might be limited.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.4
• /
• pp.281-287
• /
• 2016

Fiber Bragg grating (FBG) sensors are applied in structural health monitoring (SHM) in various application fields because of their ease of multiplexing and capability of performing absolute measurements. Moreover, the packaging methods of FBG sensors accelerate their commercialization rapidly. However, long-term SHM exposes the FBG sensors to cyclic thermal loads, and a investigation is required because it finally leads to the signal instability of the FBG sensors. In this study, the effects of sensor packaging methods two methods are generally used for the FBGs: (bonding both sides of the FBG or bonding the FBG directly on signal stability of FBG sensors are investigated. Tests are conducted on specimens in a thermal chamber, over a temperature range from $-20^{\circ}C$ to $60^{\circ}C$ for 300 cycles. Signal characteristics such as Bragg wavelength, light intensity and full width at half maximum are examined and are compared with those of the FBG sensors, obtained in a previous study under direct bonding conditions. From the comparison, it is observed that the FBG sensors with bonding on both sides of the FBG demonstrate higher signal stabilities when exposed to cyclic thermal loads during long-term SHM. Consequently, it guarantees more effectiveness when packaging the FBG sensors.