• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1561-1565
• /
• 2006

수제는 주로 호안 또는 하안 전면부에 설치하는 구조물로써 기존의 수제 설치는 하안 및 제방의 보호, 유로제어 및 주운 등의 목적에 의해 이루어졌다. 최근 들어서는 수제하류부의 흐름분리로 인해 발생되는 재순환 영역(recirculation zone)과 국부세굴에 의해 발생하는 세굴공이 수중생물의 다양한 서식처 및 홍수 시어류의 피난처로 활용될 수 있다는 점 등의 환경기능이 부각되면서 수제에 대한 설치목적이 다양화 되었다. 월류수제는 흐름이 수제 투과정도를 나타내는 투과율과 함께 다뤄지기는 기존의 실험연구에서는 수위가 수제의 머리부를 초과함에 따라 월류되는 흐름은 과도한 난류의 발생 등 투과수제에 비해 수제부근에 더 많은 영향을 미친다고 하였다. 이러한 과도한 난류의 발생은 수제를 월류하는 흐름은 상류에서는 가속되다가 수제 하류부로 흘러내리면서 다시 감속되어 교란되기 때문이다. 이러한 월류수제의 흐름특성은 수제 주변 국부세굴에 영향을 미친다. 특히 우리나라 하천은 홍수시 수위의 변화가 매우 크기 때문에 일반적인 불투과 수제라 하더라도 대부분의 수제가 월류수제처럼 거동한다. 따라서 수위가 증가함에 따라 월류가 발생하는 수제의 경우 비월류 구조물과는 세굴심의 변화가 다르게 발생할 수 있다. 본 연구에서는 월류수제 주변에서 발생되는 국부세굴이 수중생물의 다양한 서식처 및 피난처로 활용될 수 있다는 관점에서 세굴영역(세굴부피)과 세굴심의 관계에 대한 수리모형실험을 수행하고 분석하였다. 월류수제의 세굴실험은 축척의 영향을 최소화하기 위해 $7m(W){\times}40m(L){\times}1.5m(H)$ 규격의 대형 수로에서 수행하였으며 세굴변화에 미치는 시간축척의 영향을 파악하기 위해 $70{\sim}90$ 시간 동안 실험을 수행하였다. 세굴의 측정은 투명한 아크릴로 제작된 수제 내부에 CC카메라를 수제 전 후면 및 측면에 설치하여 월류수제의 세굴 발생을 실시간으로 측정하며 동시에 수제의 각 면에 각각 3개의 압력센서를 설치하여 압력분포를 측정함으로써, 월류수제 주변의 압력변화에 따른 세굴심의 실시간 변화를 비교할 수 있도록 하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.511-517
• /
• 2016

Three-dimensional models of stenosis blood vessels were prepared using a 3D printer. The models included a straight pipe with axisymmetric stenosis and a pipe that was bent $10^{\circ}$ from the center of stenosis. A refractive index matching method was utilized to measure accurate velocity fields inside the 3D tubes. Three different pulsatile flows were generated and controlled by changing the rotational speed frequency of the peristaltic pump. Unsteady velocity fields were measured by a time-resolved particle image velocimetry method. Periodic shedding of vortices occurred and moves depended on the maximum velocity region. The sizes and the positions of the vortices and symmetry are influenced by mean Reynolds number and tube geometry. In the case of the bent pipe, a recirculation zone observed at the post-stenosis could explain the possibility of blood clot formation and blood clot adhesion in view of hemodynamics.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.659-665
• /
• 2017

When an electrically conducting fluid flows through a staggered tube bank, the heat transfer and fluid flow features are changed by the externally introduced magnetic field. This study provides a numerical investigation of this phenomenon. Heat and fluid flows are investigated for unsteady laminar flows at Reynolds numbers of 50 and 100 with the Hartmann number gradually increasing from zero to 100. As the Hartmann number increases, and owing to the effects of the introduced magnetic field, the velocity boundary layer near the tube wall is thinned, the flow separation is delayed downstream, and the shrinkage of a recirculation zone formed near the rear side is observed. Based on these thermo-fluid deformations, the resulting changes in the local and average Nusselt number are investigated.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.3
• /
• pp.82-92
• /
• 2013

The Intermittent Aeration MBR systems have the advantage of controlling reaction time by changing aeration period and are one of economic BNR systems since these processes do not require MLSS recirculation that demands capital and operation costs. In this study, two intermittent aeration MBR systems were studied by computer simulation: an intermittent aeration MBR system that had both 1hr/1hr and 4hr/4hr aeration/unaeration periods at intermittent reactor and NEW INTERMITTENT-process that was an energy saving process and certified as a new process by Korean government. Since DO concentration reached only at 0.23mg/L at intermittent reactor when it was aerated, the Intermittent aeration MBR system having 1hr/1hr aeration/unaeration period showed simultaneous nitrification/denitrification and had the highest nitrogen and phosphorus removal efficiencies that were 57% and 55%, respectively. Since this study was based on the constant influent flow and characteristics, more studies are needed to define the operational characteristics of intermittent aeration MBR systems under dynamic influent conditions.

• Journal of Labour Economics
• /
• v.26 no.3
• /
• pp.49-75
• /
• 2003

This paper empirically examines multiskill formation as a critical mechanism of human capital accumulation within the firm. We investigate various factors that foster multiskill formation of the employees at the workplace. We also investigate whether and how multiskill formation of the employees, in tum, affect the labor productivity. Our empirical results are summarized as the following. First, skills of the employees are developed along the sequential path rather than the parallel path. They evolve from the simple-skill to the single-skill, and then to the multi-skill state. Second, multi skilling is stimulated by uncertainty factors of the environment and various human resource management practices such as mutual learning among workers, workers' participation in decision making, and job rotation. Third, the increase in the ratio of multiskilled workers in the firm has a positive impact on the growth of the firm's labor productivity. Our analyses show that the labor productivity growth increases by 0.019 with the increase in multi skilling ratio by 0.1. Fourth, uncertainty and human resource management practices had an indirect impact on labor productivity growth only through multiskilling. These results strongly indicate that multiskilling is a result of human capital accumulation fostered by various human resource management practices.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.506-511
• /
• 2009

In order to improve the bacterial cellulose(BC) production yield, centrifugal and inclined centrifugal impellers were developed. A 6 flat-blade turbine impeller was used as a control system. The flow pattern in the fermenter and volumetric oxygen transfer coefficient($k_La$) of these fermentation systems were studied. Fermentations were carried out for the production of BC by G. hansenii PJK in a 2-L jar fermenter equipped with new impellers. Liquid medium was circulated from the bottom, through the cylinder of the impeller and to the wall. The volumetric oxygen transfer coefficients, $k_La$, of inclined centrifugal and centrifugal impeller systems at 100 rpm were 23 and 15% of the conventional turbine impeller system, respectively. However, the conversion of microbial cells to cellulose non-producing mutant decreased and this results in the increase in BC production at low rotating speed of impellers.

• Solar Energy
• /
• v.19 no.3
• /
• pp.29-41
• /
• 1999

Three-dimensional natural convective heat transfer in a vertical channel with a protruding single module was investigated experimentally. The particular interest was in the removal of thermal energy from the module by convective heat transfer. Hence radiative and conductive heat losses were estimated by using thermocouples and heat flux sensor respectively. The flow fields in the channel were visualized by means of a smoke-method. Also, local temperatures were measured by thermocouples inside the channel, along the vertical wall and module surface. It is found that convective heat transfer was promoted at the lower comer of the module and was decreased at the upper comer due to a recirculation zone. A general correlation of the critical channel ratios was found as a function of Rayleigh number. For the range of $8.28{\times}10^3<Ra^*_c<3.48{\times}10^6$, a useful correlation for the mean Nusselt number was proposed as a function of modified channel Rayleigh number.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.10
• /
• pp.885-891
• /
• 2010

Thermal management is important for enhancing the performance and durability of polymer electrolyte membrane fuel cells (PEMFCs) and is taken into account in the design of PEMFCs. In general, cooling pates with circulating liquid coolant (water) are inserted between several unit cells to exhaust the reaction heat from PEMFCs. In this study, computational fluid dynamics (CFD) simulations were performed to characterize the uniform cooling performance of parallel multipass serpentine flow fields (MPSFFs) that were used as coolant flow channels in PEMFCs. The cooling performances of conventional serpentine and parallel flow fields were also evaluated for the purpose of comparison. The CFD results showed that the use of parallel MPSFFs can help reduce the temperature nonuniformity, and thus, can favorably enhance the performance and durability of PEMFCs.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.23-29
• /
• 2008

It has been mentioned that CSTR (Completely Stirred Tank Reactor) and UASB (Upflow Anaerobic Sludge Blanket) processes, the existing anaerobic processes, have problems in the treatment of highly concentrated particulate organic wastewater (HCPOW). Therefore, this paper discusses the treatment possibility of distillery wastewater which is a typical HCPOW using ADEPT (anaerobic Digestion Elutriated Phased Treatment) process. In the comparison of CSTR and ADEPT, ADEPT produced much higher gas than that of CSTR removing more organic matters and suspended solids in ADEPT process, ADEPT had no effect on the decrease in pH by volatile fatty acids and showed steady pH in spite of relatively short HRT. In the results of removal rate according to recycle ratios between 6Qin and 2Qin in ADEPT, 6Qin showed high removal rate during the operation time. Therefore it appears that ADEPT had an applicability for the treatment of distillery wastewater. ADEPT could be a economical process, due to the short HRT, the energy recovery by the methane production, and the utilization for carbon source of produced organic acid from the ADEPT-acid reactor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.356-362
• /
• 2005

In this paper, in order to develop a simple and high efficient ballast without an external ignitor, a half-bridge type ballast with a coupled inductor and a frequency controlled synchronous rectifier is proposed. The Internal LC resonance of the buck converter is used to generate a high voltage pulse for the ignition, and the coupled inductor filter is used for steady state ripple cancellation. Also, a synchronous buck converter is applied for the DC/DC converter stage. In order to improve the efficiency of the ballast, a frequency control method is proposed. This scheme reduces a circulation current and trun off loss of the MOSFET switch on the constant power operation, which results in increase of the efficiency of the ballast system about 4$\%$, compared to a fixed frequency control. It consists a 2-stage version ballast with a PFC circuit. The results are verified nth hardware experiments.